Polk Reserve R200 Handleiding

Polk Speaker Reserve R200

Lees hieronder de 📖 handleiding in het Nederlandse voor Polk Reserve R200 (71 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/71

R500, R600 & R700 Floor-standing Loudspeakers

R300, R350 & R400 Center Channel Speakers

R100 & R200 Bookshelf Speakers

Reserve™

R500, R600 & R700 Haut-parleurs sur pied

R300, R350 & R400 Enceintes centrales

R100 & R200 Enceintes d’étagère

OWNER’S MANUAL

English

WARNING: Listen Carefully

Polk Audio loudspeakers are capable of playing at extremely

high volume levels, which could cause serious or permanent

hearing damage. Polk Audio, Inc. accepts no liability for

hearing loss, bodily injury, or property damage resulting from

the misuse of its products. Keep these guidelines in mind and

always use good judgment when controlling volume:

• Limit prolonged exposure to volume levels that exceed

85 decibels (dB). For more information about safe volume

levels, take a look at the Occupational Health

and Safety Administration (OSHA) guidelines at

http://www.osha.gov/.

Product Disposal

Certain international, national and/or local laws and/or

regulations may apply regarding the disposal of this product.

For more information, please contact the retailer where you

purchased this product or the Polk importer/distributor in your

country. More information is also available at

www.polkaudio.com.

Expect Great Sound—The Polk Reserve Story

Thank you for purchasing the Polk Reserve Series loudspeakers!

Modern styling combined with Polk’s premium Pinnacle tweeter

and Turbine mid-range driver deliver high-resolution detail

and imaging. With our detailed, deep eortless bass, you will

enjoy a whole new listening experience. Pure and minimalist,

the Polk Reserve Series is engineered and designed with your

entertainment in mind.

Having built our reputation as “The Speaker Specialists” for

more than 45 years, we take pride in our superior sound

and build quality, which features many patented and award-

winning audio innovations. For the people of Polk, building

audio products is not just a job—it’s a passion. And if you’re

going to remember one thing, remember this: We live by the

truest principle of what audio should deliver—great sound at an

aordable price for everyone!

Technical Assistance or Service

Thank you for your Polk® purchase! If you have a question or

comment, please feel free to contact us. Please visit

www.polkaudio.com for support contact information.

Contents

Expect Great Sound — The Polk Reserve Story 2 .............................

Safety Instructions 3 ........................................................................................

What’s in the Box .............................................................................................4

How to Connect Your System ....................................................................4

Caring for Your Reserve Loudspeakers ................................................5

Reserve Series Speaker Positioning .......................................................6

Speciﬁcations 11 ....................................................................................................

English

Connectors

You have several options when choosing connectors for your

speaker wires, and it’s really a matter of personal preference.

Three of the more commonly used are banana plugs, spade

lugs and bare wire. If you know where you want to locate your

speakers and plan to set up your system and leave them there,

then bare wire will work ﬁne. Just make sure there are not

stray strands of wire that could come into contact. If you like

to experiment with dierent speaker locations, spade lugs or

banana plugs oer more convenient options when it comes to

disconnecting and reconnecting wires.

Basic Floor-Standing, Center, Bookshelf, and Height Module

Speaker Hookup

Make sure that the red (+) and black (-) connectors on your

ampliﬁer or receiver connect to the red (+) and black (-) connectors

on your speakers. If your speakers sound “thin,” with little bass and

little or no center image, odds are that one of the speaker wires is

connected backwards. Double check all connections.

Bi-Wiring (R700 only)

Bi-wiring can provide noticeable improvements in the overall

transparency of your loudspeakers. After removing the jumpers,

run separate speaker wires to the low and high frequency

drivers from a single ampliﬁer (the upper set of binding posts

are for the high frequency drivers, the lower set of binding

posts are for the low frequency drivers). Connect one set of

speaker wires to the upper terminals on each speaker and one

set of wires to the lower terminals. Connect the other ends of

both wire sets to the same ampliﬁer outputs. See ampliﬁer/AV

receiver user manual for conﬁguration instructions (Figure 1).

What’s in the Box

Each box contains:

1. Loudspeaker(s)

2. Owner’s Manual

3. Registration Card

4. Magnetic grilles

(Speaker cable not included)

How to Connect Your System

To get the best sound quality, it’s important to wire your

speakers correctly.

Wire Preparation

Follow the hookup directions included with your receiver/

ampliﬁer. Strip 0.5” (12.7mm) of insulation from each of the

two conductors of the wire to expose the bare metal and twist

each of the individual conductors into single un-frayed strands.

Note that one of the terminals on the rear of each speaker is

marked red (+) and the other is black (–). Make sure that you

connect the wire from the positive (+) terminal of your ampliﬁer

or receiver to the red (+) terminal on your speaker and the wire

from the negative (–) terminal of your ampliﬁer or receiver to

the black (–) terminal on your speaker. Most wire has some

indicator (such as color-coding, ribbing or writing) on one of

the two conductors to help you maintain consistency.

These recommendations are for all connections from the

ampliﬁer/receiver to each speaker:

Binding Posts

To connect wire to the binding post, unscrew the binding post

cap and insert the bare wire into the hole near the base of the

binding post. Do not insert the insulated part of the wire into

the hole as this will not give you a good connection. Tighten the

binding post cap until it seats ﬁrmly with the wire, but do not

over tighten.

Runs Minimum Wire Gauge

Lengths up to 25' (5 m) 16

Lengths greater than 25' (5 m)

but less than 50' (15 m)

Lengths greater than 50' (15 m)

but less than 75' (25 m)

Lengths greater than 75' (25 m) 10

(Figure 1)

RIGHT FRONT

Product specificaties

Merk:	Polk
Categorie:	Speaker
Model:	Reserve R200

Heb je hulp nodig?

Als je hulp nodig hebt met Polk Reserve R200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Polk

Polk ES90 Handleiding

13 November 2023

Polk PA D4000.4 Handleiding

20 Juli 2023

Polk TSi200 Handleiding

13 Juni 2023

Polk Monitor XT90 Handleiding

11 Juni 2023

Polk TSX330 Handleiding

1 Juni 2023

Polk RTi A7 Handleiding

28 Mei 2023

Polk Vanishing 255c-RT Handleiding

26 Mei 2023

Polk T30 Handleiding

14 Mei 2023

Polk S50 Handleiding

13 Mei 2023

Polk S15 Handleiding

13 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024