Planet IGS-510TF Handleiding

Planet Niet gecategoriseerd IGS-510TF

Lees hieronder de 📖 handleiding in het Nederlandse voor Planet IGS-510TF (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Compact Industrial 4-Port

10/100/1000T + 1-Port 100/1000X SFP Gigabit Ethernet Switch,

IGS-510TF. In the following sections, the term “Industrial Gigabit

Ethernet Switch” means the IGS-510TF.

Open the box of the Industrial Gigabit Ethernet Switch and carefully

unpack it. The box should contain the following items:

Industrial Gigabit

Ethernet Switch x 1 User’s Manual x 1 Wall-mount Kit x 1

DIN-rail Kit x 1 RJ45 Dust Caps x 4 SFP Dust Cap x 1

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

Switch Fabric 10Gbps

Throughput

(packet per

second)

7.4Mpps@64bytes

Address Table 2K entries

Buer Memory 4M bits on-chip buer memory

Jumbo Frame 9Kbytes

Flow Control Back pressure for half duplex

IEEE 802.3x pause frame for full duplex

Standards Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall)

IEC 60068-2-27 (shock)

IEC 60068-2-6 (vibration)

Standards

Compliance

IEEE 802.3 Ethernet

IEEE 802.3u Fast Ethernet

IEEE 802.3ab Gigabit Ethernet

IEEE 802.3az Gigabit SX/LX

IEEE 802.3x Full-Duplex Flow Control

IEEE 802.3az Energy Ecient Ethernet (EEE)

IEEE 802.1p Class of Service

Environment

Temperature Operating: -40~75 degrees C

Storage: -40~75 degrees C

Humidity Operating: 5~90% (non-condensing)

Storage: 5~90% (non-condensing)

Note

The wire gauge for the terminal block should be in the

range between 12 and 24 AWG.

Note

1. The power input range is for Indus9V ~ 48V DC -

trial Gigabit Ethernet Switch and supports 24V AC

2. Use one power input when using 24V AC.

3.5 Grounding the Device

Users MUST complete grounding wired with the device; otherwise,

a sudden lightning could cause fatal damage to the device.

Max. Fault Alarm Loading: 24V, 1A

V1+ V2+

PWR1 PWR2Alarm

DC Input: 9-48V

, 0.28A max.

AC Input: 24V

, 0.3A max.

1 2 3 4 5 6

Earth Ground

Note

EMD (Lightning) DAMAGE IS NOT COVERED UNDER

WARRANTY.

3.2 LEDDenition:

LED Color Function

P1 Green Lights to indicate power input 1 has power.

P2 Green Lights to indicate power input 2 has power.

1000

LNK/ACT Green

Lights to indicate the port is running at

1000Mbps speed and successfully established.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

10/100

LNK/ACT Amber

Lights to indicate the port is running

at 10/100Mbps speed and successfully

established.

Blinks to indicate that the Switch is actively

sending or receiving data over that port.

3.3 Switch Upper Panel

The upper panel of the Industrial Gigabit Ethernet Switch consists

of one terminal block connector within two power input.

V1+ V1-

PWR1

V2+ V2-

PWR2

DC Input: 9-48V , 0.6A max.

AC Input: 24V , 0.3A max.

1 2 3 4

Figure2: IGS-510TF Top View

2.ProductSpecications

Model IGS-510TF

Hardware Specications

Copper Ports 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X

ports

SFP Slot 1 1000BASE-SX/LX/BX SFP interface

compatible with 100BASE-FX SFP

Connector Removable 4-pin terminal block

Pin 1/2 for Power 1; Pin 3/4 for Power 2

Power

Requirements

9~48V DC, redundant power with reverse

polarity protection, power support24V AC

Power

Consumption

(Ethernet Full

Loading)

Max. 2.4 watts/8.1BTU

Dimensions

(W x D x H) 70 x 104 x 30 mm

Weight 239g

Enclosure IP30 metal case

Installation DIN-rail kit and wall-mount kit

ESD Protection 6KV

EFT Protection 6KV

Switch Specications

Switch

Architecture Store-and-Forward

3. Hardware Introduction

3.1 Switch Front Panel

The front Panel of the Industrial Gigabit Ethernet Switch consists of

Ethernet interfaces and LED indicators.

 Front View

P1 P2

ACTLNK

1000

10/

100

Figure1: IGS-510TF Front View

3.4 Wiring the Power Inputs

The terminal block connector on the top panel of Industrial Gigabit

Ethernet Switch is used for two redundant power inputs. Please

follow the steps below to insert the power wire.

Caution

When performing any of the procedures like inserting

the wires or tightening the wire-clamp screws, make

sure the power is OFF to prevent from getting an

electric shock.

1. Insert positive and negative DC power wires into contacts 1 and

2 for POWER 1, or contacts 3 and 4 for POWER 2.

V1+ V1-

PWR1

V2+ V2-

PWR2

DC Input: 9-48V , 0.6A max.

AC Input: 24V , 0.3A max.

1 2 3 4

2. Tighten the wire-clamp screws for preventing the wires from

loosening.

1 2 3 4

Power 1 Power 2

+ - + -

4. Installation

This section guides you to installing the Industrial Gigabit Ethernet

Switch on the DIN rail and wall. Please read this chapter completely

before continuing.

Note

This following pictures show how to install the device.

However, the device in the picture is not IGS-510TF.

4.1 DIN-rail Mounting Installation

4.2 Wall-mount Plate Mounting

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

4.3 Side Wall-mount Plate Mounting

Caution

You must use the screws supplied with the wall-

mounting brackets. Damage caused to the parts by

using incorrect screws would invalidate your warranty.

Customer Support

Thank you for purchasing PLANET products. You can browse our

online FAQ resource on PLANET web site rst to check if it could

solve your issue. If you need more support information, please

contact PLANET switch support team.

PLANET online FAQs:

http://www.planet.com.tw/en/support/faq

Switch support team mail address:

support@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

5. Three-View Diagram

The three-view diagram of the Industrial Gigabit Ethernet

Switch consists of multiple auto-sensing 10/100/1000BASE-T RJ45

ports and one 100/1000X SFP slot removable terminal , and one

block. The LED indicators are also located on the front panel.

 IGS-510TF

104.00

30.00

70.00

18.00

9.00

91.00

52.00 52.00

28.00

48.80 40.00

18.00

40.00

18.00

15.20

15.00

11.00

45.00

10.00

147.00

28.00 28.00

Mounting Kit

DIN-Rail Kit

Unit: mm

Rear ViewSide View Side View

Top View

Front View

Bottom View

P1 P2

ACTLNK

1000

10/

100

V1+ V1-

PWR1

V2+ V2-

PWR2

DC Input: 9-48V , 0.6A max.

AC Input: 24V , 0.3A max.

Figure3: IGS-510TF Three-View Diagram

FCC Warning

This device has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used

in accordance with the Instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own

expense.

WEEE Warning

To avoid the potential eects on the environment and

human health as a result of the presence of hazardous

substances in electrical and electronic equipment, end

users of electrical and electronic equipment should

understand the meaning of the crossed-out wheeled bin symbol. Do

not dispose of WEEE as unsorted municipal waste and have to

collect such WEEE separately

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2- - -2- -2219 9518 Fax:886 2219 9528

EC Declaration of Conformity

I hereby confirm that the following equipment complies with the requirements set out in the

Council Directive on the Approximation of the Laws of the Member States relating to

Electromagnetic Compatibility Directive on (2014/30 U/E ).

Type of Product:

Industrial Compact 4-Port 10/100/1000T + 1-Port 100/1000X SFP Gigabit Ethernet Switch

Model:

IGS-510TF

Produced by:

Manufacturer’s Name: Planet Technology Corporation

Manufacturer’s Address: 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan, R.O.C.

For the evaluation regarding the EMC, the following standards were applied:

EN 55032 (2015 + AC:2016)

EN 55024 (2010 + A1:2015)

EN 55035 (2017)

Person responsible for making this declaration

Name: Kent Kang

Title: Director

Taiwan

March 23, 2020

Country

Date

Legal Signature

Product specificaties

Merk:	Planet
Categorie:	Niet gecategoriseerd
Model:	IGS-510TF
Kleur van het product:	Blauw
Gewicht:	252 g
Breedte:	30 mm
Diepte:	70 mm
Hoogte:	104 mm
Materiaal behuizing:	Metaal
Internationale veiligheidscode (IP):	IP30
LED-indicatoren:	Stroom
Stroom:	24 A
Connectiviteitstechnologie:	Bedraad
Aantal Ethernet LAN (RJ-45)-poorten:	4
Vermogensverbruik (max):	2.8 W
DC voltage input:	9 - 48 V
Certificering:	FCC Part 15 Class A, CE
Ingangsspanning:	9 - 48 V
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.1p, IEEE 802.3, IEEE 802.3ad, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Temperatuur bij opslag:	-40 - 75 °C
Intern:	Nee
Golflengte:	- nm
Luchtvochtigheid bij opslag:	5 - 90 procent
Ethernet interface type:	Gigabit Ethernet
Ophangsysteem voor aan de muur:	Ja
Maximale overdrachtssnelheid van gegevens:	1000 Mbit/s
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Nee
Switchingcapaciteit:	10 Gbit/s
MAC-adrestabel:	4000 entries
10G support:	Nee
Datastroombeheer:	Ja
Switch type:	Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten:	4
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Aantal moduleslots SPF:	1
Throughput:	7.4 Mpps
Jumbo Frames ondersteuning:	Ja
Full duplex:	Ja
Warmtedissipatie:	9.5 BTU/h
Maximaal bereik:	100 m
Auto-negotiation:	Ja
Bedrijfstemperatuur (T-T):	-40 - 75 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Code geharmoniseerd systeem (HS):	85176990
Jumbo frames:	9000
DIN rail bevestiging:	Ja
Store-and-forward:	Ja
Ondersteundende kabel types:	Cat3, Cat4, Cat5, Cat5e, Cat6
Vezel-optische connector:	SFP
Converter input interface:	10Base-T, 100Base-T, 1000Base-T
Duplex systeem:	Full, Half
Converter output interface:	1000Base-BX, 1000Base-LX, 1000Base-SX
Fibre channel-poorten:	1
Half-duplex:	Ja