Planar SL4851 Handleiding

Planar Monitor SL4851

Lees hieronder de 📖 handleiding in het Nederlandse voor Planar SL4851 (46 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46
Planar Simplicity Series
www.planar.com
Planar Simplicity Series
ii
Safety Instructions
Warnings and Precautions
KNOW THESE SAFETY SYMBOLS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol indicates high voltage is present inside.
It is dangerous to make any kind of contact with any
inside part of this product.
This symbol alerts you that important literature
concerning operation and maintenance has been
included with this product.
CAUTION: FCC/CSA regulations state that any unauthorized
changes or modications to this equipment may void
the user’s authority to operate it.
CAUTION: To prevent electric shock, match the wide blade of plug
to the wide slot, and fully insert the plug.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
The Socket-outlet should be installed near the apparatus and be easily
accessible.
Read and follow these instructions
when connecting and using your Public
Information Display:
• Unplug the display if you are not going to use it for an extensive
period of time.
• Unplug the display if you need to clean it with a slightly damp cloth.
The screen many be wiped with a dry cloth when the power is off.
However, never use alcohol, solvents or ammonia-based liquids.
• Consult a service technician if the display does not operate normally
when you have followed the instructions in this manual.
• The casing cover should be opened only by qualied service
personnel.
• Keep the display out of direct sunlight and away from stoves or any
other heat sources.
• Remove any object that could fall into the vents or prevent proper
cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not expose it to
rain or excessive moisture.
• If turning off the display by detaching the power cable, wait for 6
seconds before re-attaching the power cable for normal operation.
• To avoid the risk of shock or permanent damage to the set do not
expose the display to rain or excessive moisture.
• When positioning the display, make sure the power plug and outlet
are easily accessible.
• IMPORTANT: Always activate a screen saver program during your
application. If a still image in high contrast remains on the screen for
an extended period of time, it may leave an ‘after-image’ or ‘ghost
image’ on the front of the screen. This is a well-known phenomenon
that is caused by the shortcomings inherent in LCD technology. In
most cases the after-image will disappear gradually over a period
of time after the power has been switched off. Be aware that the
after-image symptom cannot be repaired and is not covered under
warranty.
Planar Simplicity Series
iii
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not use over 16 hours per day.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
9. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
10. Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
12. Only use attachments/accessories specied by the manufacturer.
13. Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
14. Unplug this apparatus during lightning storms or when unused for
long periods of time.
15. Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
WARNING: Apparatus shall not be exposed to dripping or splashing
and no objects lled with liquids, such as vases, shall be
placed on the apparatus.
WARNING: The batteries (batteries installed) shall not be exposed
to excessive heat such as sunshine, re or the like.
WARNING: The mains plug or appliance coupler is used as the
disconnect device,the disconnect device shall remain
readily operable.
WARNING: To prevent the spread of re, keep candles or other
open ames away from this product at all times.
WARNING: To prevent injury, this apparatus must be securely
attached to the oor/wall in accordance with the
installation instructions.
WARNING: This equipment is compliant with Class A of EN55032/
CISPR. In a residential environment this equipment may
cause radio interference.
WARNING: This is a class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate messures..
CAUTION: These servicing instructions are for use by qualied
service personnel only. To reduce the risk of electric
shock,do not perform any servicing other than that
contained in the operating instructions unless you are
qualitied to do so.
CAUTION: Excessive sound pressure from earphones and
headphones can cause hearing loss. Adjustment of the
equalizer to maximum increases the earphone and
headphone output voltage and the sound pressure level.
Therefore, to protect your hearing, adjust the equalizer
to an appropriate level.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
.


Product specificaties

Merk: Planar
Categorie: Monitor
Model: SL4851
Kleur van het product: Zwart
Gewicht: 12000 g
Breedte: 1082 mm
Diepte: 61 mm
Hoogte: 663 mm
Gewicht verpakking: 16000 g
Beeldschermdiagonaal: 48 "
Resolutie: 1920 x 1080 Pixels
Oorspronkelijke beeldverhouding: 16:9
USB-poort: Ja
Ondersteuning voor plaatsing: Binnen
Ethernet LAN: Ja
Kijkhoek, horizontaal: 178 °
Kijkhoek, verticaal: 178 °
Meegeleverde kabels: AC, HDMI, RS-232
Typische contrastverhouding: 4000:1
Helderheid: 350 cd/m²
Aantal HDMI-poorten: 1
Audio-ingang (L, R): 1
PC audio ingang: Ja
Componentingang video (YPbPr/YCbCr): 1
DVI-poort: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 1
Kabelslot sleuf type: Kensington
Ingebouwde luidsprekers: Ja
Gemiddeld vermogen: 20 W
Aantal ingebouwde luidsprekers: 2
Stroomverbruik (in standby): - W
Certificering: FCC Class A, UL, CE
Beeldscherm, aantal kleuren: 16.78 miljoen kleuren
HD type: Full HD
Display technologie: LCD
Responstijd: 8 ms
Pixel pitch: 0.549 x 0.549 mm
Levensduur paneel: - uur
Paneelmontage-interface: 200 x 200,400 x 400 mm
Bezel breedte (onderkant): 14.7 mm
Bezel breedte (zijkant): 11.9 mm
Bezel breedte (bovenkant): 11.9 mm
Model: Horizontaal/Verticaal
Bedoeld voor: Winkel
Bedrijfsuren (uren/dagen): 16/7
Remote (IR) ingang: 1
VGA (D-Sub) invoer ports: 1
Audio (L,R) out: 1
RS-232: Ja
LED backlight-type: Edge-Lit LED
Afstandsbediening inbegrepen: Ja
Productontwerp: Digitale signage flatscreen
AC-ingangsspanning: 100 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Stroomverbruik (typisch): 149 W
Bedrijfstemperatuur (T-T): 5 - 40 °C

Heb je hulp nodig?

Als je hulp nodig hebt met Planar SL4851 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor Planar

Planar

Planar PLL2250MW Handleiding

15 November 2023
Planar

Planar PLL1900W Handleiding

13 September 2023
Planar

Planar PLL2210MW Handleiding

13 September 2023
Planar

Planar SD2220W Handleiding

13 September 2023
Planar

Planar PXN2490MW Handleiding

13 September 2023
Planar

Planar PT1945R Handleiding

13 September 2023
Planar

Planar PT3285PW Handleiding

13 September 2023
Planar

Planar IX2790 Handleiding

13 September 2023
Planar

Planar PT1915MU Handleiding

13 September 2023
Planar

Planar VM49MX-X Handleiding

13 September 2023

Handleiding Monitor

Nieuwste handleidingen voor Monitor