Pioneer DVR-215D Handleiding

Bekijk gratis de handleiding van Pioneer DVR-215D (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 5.0 sterren uit 6 reviews. Heb je een vraag over Pioneer DVR-215D of wil je andere gebruikers van dit product iets vragen? Stel een vraag

S

ERIAL

-ATA

D

RIVE

I

NSTALLATION

I

N

A

N

I

NSTANT

Step 1 – Prepare the Computer

1) Turn OFF the computer and disconnect the power cord.

2) Remove the bezel and the open drive bay cover from the computer’s front panel.

Note: Your computer may be a

tower model as shown on the left

or a desktop model as shown

below. This drive works in either

PC chassis style.

Step 2 – Prepare the Drive

3) Attach slide rails to the drive if required for your drive model.

Slide rails are sold separately through computer retailers.

4) Position the drive close to the open computer bay and carefully insert the drive.

Horizontal Installation Vertical Installation

Step 3 – Connect the Cables

5) Connect the computer’s power cable to the

drive; checking the polarity of the cable.

6) Connect the computer’s Serial-ATA Interface

cable to the drive.

The computer powers the drive. Do NOT use a

power supply other than the PC’s internal source

Step 4 – Finish the Installation

7) Place the mounting screws in the appropriate holes and tighten by hand.

When mounting screws are loose, vibrations from the spinning disc may cause a ripping sound.

8) Replace the bezel and power the computer ON.

Serial-ATA Drives Use Direct-Only Communication.

There is NO Master/Slave Jumper.

Product specificaties