Pioneer CU-RF100-U Handleiding

Pioneer Controller CU-RF100-U

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer CU-RF100-U (84 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/84
Omni-Directional RF Remote Control
Télécommande RF omni-directionnelle
Mando a distancia RF omnidireccional
CU-RF100-U
Operating Instructions
Mode d’emploi
Manual de instrucciones
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
D8-10-1-2_A1_En
Information to User
Alterations or modifications carried out without
appropriate authorization may invalidate the user’s
right to operate the equipment.
D8-10-2_A1_En
Caution
FCC Radiation Exposure Statement: This equipment
complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment
should be installed and operated with minimum
distance 20 cm between the radiator and your body.
U.S. and Canadian models only
European model only
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of
the device.
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
Information for users on collection and disposal of old equipment and used batteries
These symbols on the products, packaging, and/or accompanying documents mean
that used electrical and electronic products and batteries should not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products and used batteries,
please take them to applicable collection points in accordance with your national
legislation.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries,
please contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.
These symbols are only valid in the European Union.
For countries outside the European Union:
If you wish to discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
K058a_A1_En
Symbol examples
for batteries
Symbol for
equipment
Pb
This Class B digital apparatus complies with
Canadian ICES-003.
D8-10-1-3_A1_En
English Italiano Français
Nederlands
EspañolDeutsch
Contents
01 Before you start
Loading the batteries
. . . . . . . . . . . . . . . . . . . . 4
Flow for operating the receiver with RF two-way
communications
. . . . . . . . . . . . . . . . . . . . . . . 4
02 Using the RF communications
function
About the RF communications function
. . . . . . 5
Pairing the RF adapter and remote control
. . . . 6
Operating the receiver by RF
communications
. . . . . . . . . . . . . . . . . . . . . . . 7
Operating other components by RF
communications
. . . . . . . . . . . . . . . . . . . . . . . 7
Renaming input function names in synchrony
with the receiver
. . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the remote control operation mode
. . . . 9
Precautions when using the Omni-Directional
RF Remote Control
. . . . . . . . . . . . . . . . . . . . . 10
Precautions regarding wavelength
. . . . . . . . 10
Usable range
. . . . . . . . . . . . . . . . . . . . . . . . 10
Signal reflection
. . . . . . . . . . . . . . . . . . . . . 11
For safe use
. . . . . . . . . . . . . . . . . . . . . . . . . 11
03 Controlling the rest of your
system
About the Remote Setup menu
. . . . . . . . . . . . 12
Operating multiple receivers
. . . . . . . . . . . . . . 13
Setting the remote to control other
components
. . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting preset codes directly
. . . . . . . . . . . . 14
Programming signals from other remote
controls
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Erasing one of the remote control button
settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Resetting the input assignment of one of the
input function buttons
. . . . . . . . . . . . . . . . . . 16
Resetting the remote control settings
. . . . . . . 16
Confirming preset codes
. . . . . . . . . . . . . . . . . 16
Renaming input function names manually
. . . 17
Direct function
. . . . . . . . . . . . . . . . . . . . . . . . 17
Multi Operation and System Off
. . . . . . . . . . . 17
Programming a multi-operation or a
shutdown sequence
. . . . . . . . . . . . . . . . . . . 18
Using multi operations
. . . . . . . . . . . . . . . . . 19
Using System off
. . . . . . . . . . . . . . . . . . . . . 19
Controlling components
. . . . . . . . . . . . . . . . . 19
04 Controls and displays
Remote control
. . . . . . . . . . . . . . . . . . . . . . . . 22
Remote control display
. . . . . . . . . . . . . . . . . 24
RF adapter
. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Operating range of remote control unit for
infrared (IR) signal transmission
. . . . . . . . . . . 25
05 Additional information
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . 26
Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . 27
Checking what’s in the box
Please check that you’ve received the following supplied accessories:
• AA/LR6 dry cell batteries x4
• RF adapter
• IR blaster cable x2
• These operating instructions
European, U.S. and Canadian models only:
• Warranty card
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

Product specificaties

Merk: Pioneer
Categorie: Controller
Model: CU-RF100-U

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer CU-RF100-U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Controller Pioneer

Pioneer

Pioneer CD-SR1 Handleiding

16 April 2023
Pioneer

Pioneer CU-RF100-U Handleiding

12 November 2022

Handleiding Controller

Nieuwste handleidingen voor Controller

HyperX

HyperX ChargePlay Clutch Charging Grips Handleiding

25 April 2024
Victrix

Victrix Pro FS-12 Handleiding

25 April 2024
Circle

Circle with Disney Handleiding

18 April 2024
Genesis

Genesis Mangan 200 Handleiding

16 April 2024
Genesis

Genesis Mangan 300 Handleiding

16 April 2024
Reely

Reely Sky-series-12A Handleiding

16 April 2024
Hori

Hori Tactical Assault Commander Handleiding

16 April 2024
BeamZ

BeamZ WTR10 Handleiding

15 April 2024
Datapath

Datapath VSN1182 Handleiding

8 April 2024
Datapath

Datapath VSN982 Handleiding

8 April 2024