Pioneer CM-S58T Handleiding

Pioneer Speaker CM-S58T

Lees hieronder de 📖 handleiding in het Nederlandse voor Pioneer CM-S58T (10 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

CM-S54T / CM-S56T/

CM-S58T

CM Series

http://pioneerproaudio.com

Installation and Instruction Manual

Surface mount speaker

For installation and other support information, visit the above site.

Introduction

Thank you for purchasing this product. Be sure to read the "Read Before Use" before using this product. Also, read the installation

and user's manual from the support site that can be viewed from the URL or QR code given here. You may require the installation

and user's manual in future, so keep them carefully at a safe location.

http://www.pioneerproaudio.com/en/sound/ceiling/surfacemountspeaker.html

Read Before Use (Important)

[For American Users (Pour les utilisateurs aux États-Unis)]

IMPORTANT NOTICE

THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.

RECORD THESE NUMBERS ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

D36-AP9-1_A1_En

[For American Users and Canadian Users]

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without annoying blaring or

distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to

higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment

at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

• Set your volume control at a low setting.

• Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

• Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

• Do not turn up the volume so high that you can’t hear what’s around you.

• Use caution or temporarily discontinue use in potentially hazardous situations.

• Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

S001a_A1_En

[For European Users]

If you want to dispose of this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge

to designated collection facilities or to a retailer (if you purchase a similar new one).

For countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent

potential negative effects on the environment and human health. K058b_B_En

WARNING

Installation

This loudspeaker should be installed by a professional installer.

There is a risk the loudspeaker may fall. Ask a professional

installer that possesses sufficient skills and experience to install

the loudspeaker. Two or more workers are also recommended for

installation.

AlphaTheta Corporation bears no responsibility for accidents and

damage resulting from deficient installation or mounting, misuse,

modifications, and/or natural disasters.

Only the workers installing the loudspeaker should be near it

during installation.

There is a risk of injury if parts fall.

Tighten the screws and bolts to the indicated torque.

• Falling of screws and bolts may result in injury or accident.

• The knob of the knob screw for the U-bracket is for temporary fixing.

For permanent fixing, use a torque wrench to adjust the torque and

then fix it in place.

When installing the loudspeaker on the ceiling or a wall, ensure

safe installation by confirming the strength of the installation

location and checking the installation method.

If the installation location or installation means such as installation

fixtures, etc. do not have enough strength to withstand the mass of the

loudspeaker system, it could result in falling of the loudspeaker. Also,

be sure to implement redundant safety measures such as by using the

supplied wires, etc. If the length of the supplied fall prevention wire is

not sufficient, arrange for a wire with appropriate length and strength in

consideration of the speaker weight and installation condition. Secure

the fall prevention wire on the building at a location different from where

the loudspeaker mounting fixture is secured on the building.

Do not install the loudspeaker in the following environments.

• Locations with a large amount of oily smoke and smoke for theatrical

or stage performances.

• Locations that are constantly exposed to water.

• Locations with a large amount of oily smoke, such as inside kitchens

or factories.

• Unstable locations, such as those exposed to vibrations.

• Locations where flammable materials are used, such as alcohols

and aerosol insecticides.

• Locations affected by heat generation, such as near light fixtures or

heaters.

• Locations exposed to direct sunlight.

• Locations where salt damage or corrosive gases may occur.

• Locations where clumps of accumulated snow may fall.

There is a risk of deformation or discoloration of the enclosure and

failure of the loudspeaker, which may result in fire or the loudspeaker

falling in a worst case scenario.

When installing the loudspeaker outdoors, make sure to install it

at a location away from direct contact with rain or sunlight, such

as under the eaves.

Large amounts of rainwater and ultraviolet rays can cause deformation

or discoloration of the enclosure and failure of the speaker, which may

result in fire or the loudspeaker falling in a worst case scenario.

Take snow protection measures.

Piling of snow may cause falling of the loudspeaker, thus resulting in

injury or accident. Take measures against accumulation of snow on the

loudspeaker.

Usage Methods

Be sure to inspect the loudspeaker after an earthquake.

A problem with the mounting part may occur, which could cause the

loudspeaker to fall.

Do not open or modify the interior of the loudspeaker.

The interior has high voltage components, and there is a risk of fire and

electric shock. Ask your dealer for inspection, maintenance, and repair

of the interior of the loudspeaker.

Do not pull out or insert the cables with wet hands.

This could result in an electric shock.

Immediately stop using the loudspeaker if a problem occurs.

If a problem occurs, such as smoke, an unusual odor, or the

loudspeaker is damaged by ingress of water or a foreign object,

immediately turn off the power to the amplifier that is used, and

then request repair. There is a risk of fire and electric shock if the

loudspeaker is used when there is a problem.

To prevent a fire hazard, do not place any naked flame sources (such

as a lighted candle) on the equipment.

Do not insert metallic or flammable objects into the holes on the

front of the loudspeaker, and do not allow those objects to fall into

the holes.

There is a risk of fire or electric shock if metallic or flammable objects

get inside the loudspeaker. Be particularly careful in homes with

children.

Do not place small parts within reach of young children.

Promptly consult with a physician if a small part is accidentally

swallowed.

CAUTION

Installation

When connecting the loudspeaker to other equipment, turn off the

power to each piece of equipment.

Carefully read the user's manual for each piece of equipment, and

connect the equipment according to the description in the manual. In

addition, use the specified cords to connect the equipment. There is a

risk of electric shock.

Check the stability of the loudspeaker after mounting it to the wall

or ceiling.

Inspect the loudspeaker immediately after mounting it. In addition,

check the stability of the loudspeaker regularly.

Usage Methods

Do not use the loudspeaker in the following states.

• Do not exceed the permissible input.

• If greatly increasing high pitched sounds with a equalizer, do not

increase the volume too much.

• Do not force the loudspeaker to produce loud sounds with a low

output power amplifier.

• Do not use the loudspeaker for a long period of time when the sound

is distorted.

The loudspeaker may be damaged, resulting in heat generation and

fire.

Turn the volume all the way down before turning on the power and

changing the connection.

There is a risk of hearing loss and other problems if the loudspeaker

suddenly produces a loud sound.

Do not listen to the loudspeaker at high volumes for a long period

of time.

There is a risk of hearing loss.

ALSO TAKE NOTE OF THE FOLLOWING

CAUTIONS

Installation

When installing the loudspeaker outdoors, do not use the

loudspeaker by tilting it upward from the level.

When installing the loudspeaker outdoors, do not tilt the front of the

loudspeaker upward from the level. This may result in inflow of water

into the loudspeaker, causing damage or troubles in the loudspeaker.

Use the loudspeaker within the specified range of load impedance

of the amplifier.

When connecting the loudspeakers in parallel, always connect within

the specified range of load impedance of the amplifier. Failure to do so

could result in malfunctioning of the amplifier.

About high-impedance connections

During a high-impedance connection, take note that the total output of

each speaker does not exceed the rated output of the power amplifier.

Install the loudspeaker in accordance with the law.

Install the loudspeaker in accordance with all applicable laws, such as

related rules and regulations.

Usage Methods

Do not wipe the loudspeaker with alcohol, thinner, benzene, etc.

Wipe gently with a soft cloth during maintenance. If the loudspeaker

is very dirty, wipe off the dirt with a soft cloth that has been immersed

in a neutral detergent diluted up to 5 to 6 times with water, and then

thoroughly squeezed. Thereafter, wipe with a dry cloth. Deposition

of alcohol, thinner, benzene, and pesticides may cause peeling of

prints or coatings. Also, exposing the loudspeaker to rubber and vinyl

products for a long time may harm the cabinet, and must therefore

be avoided. If you are using a chemical dust cloth, be sure to read

the precautions appended with the chemical dust cloth. Remove the

cables when performing maintenance.

About protective circuits

This loudspeaker is provided with a built-in protective circuit. If excess

input is applied to the loudspeaker, the protective circuit is activated,

and the tweeter sound reduces. If the sound becomes extremely low

during the use of the loudspeaker, quickly reduce the volume of the

amplifier. The sound will be automatically recovered in a few seconds

to a few tens of seconds.

All illustrations in this manual are provided to explain the operation of the loudspeaker. Therefore, some illustrations may differ from the actual

specifications.

Product specificaties

Merk:	Pioneer
Categorie:	Speaker
Model:	CM-S58T

Heb je hulp nodig?

Als je hulp nodig hebt met Pioneer CM-S58T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Pioneer

Pioneer UD-RP351PRO Handleiding

15 Augustus 2023

Pioneer TS-B401PRO Handleiding

15 Augustus 2023

Pioneer TS-B351PRO Handleiding

15 Augustus 2023

Pioneer UD-RP401PRO Handleiding

14 Augustus 2023

Pioneer CM-510ST Handleiding

29 Juni 2023

Pioneer Elite S-IW891 Handleiding

24 Juni 2023

Pioneer UD-ME30CP Handleiding

13 Juni 2023

Pioneer TS-G460 Handleiding

10 Juni 2023

Pioneer S-H309V Handleiding

4 Juni 2023

Pioneer S-DJO5 Handleiding

27 Mei 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024