Pinnacle AudioBuddy Handleiding

Pinnacle Receiver AudioBuddy

Lees hieronder de 📖 handleiding in het Nederlandse voor Pinnacle AudioBuddy (8 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Users Manual

Dual Mic Preamp | Direct Box

Audio Buddy

Introduction

This product complies with European CE requirements.

Thank you for your purchase of the M-Audio AudioBuddy™, mic

preamp and direct box. M-Audio has designed and manufactured

several different audio mixers including MiniMixer, MicroMixer 18,

MultiMixer 6, MultiMixer 10 and miXim 10. All of these mixers have

two things in common: 1.) they are exceedingly quiet -- quieter than

99% of all mixers on the market and 2.) they are uniquely conﬁgured to

meet the speciﬁc needs of the MIDI and multimedia musician.

The Audio Buddy, once again, ﬁts these two criteria. First, it is a very

quiet mic preamp. This is because the unit’s simple and efficient

design and ultra compact layout eliminates much of the noise. The

unit also has a higher than usual voltage “rail” across its internal op-

amps. This means that you get more “punch” and much more dynamic

audio output.

Secondly, the Audio Buddy (when coupled with its ultra quiet

performance) is the perfect audio “gateway” for recording the two

most signiﬁcant, non-line level instruments in the studio: microphones

and electric guitars.

The Audio Buddy has two completely independent preamplifier

sections. Each of these sections has: 1.) a balanced XLR input on the

back of the unit, 2.) a high impedance 1/4” unbalanced input (T S) on

the front of the unit, 3.) signal (present) and clipping LEDs, 4.) a gain

control and 5.) a 1/4” dual purpose output on the back of the unit that

provides either an unbalanced out (when a mono plug is used) or a

balanced out (when a stereo plug is used).

IMPORTANT: Whenever one of the front panel high impedance

inputs is used, the associated back panel XLR is disabled.

The Audio Buddy also has built in phantom power which can be

switched on or off for both channels. When the rear panel phantom

power switch is in, phantom power to both channels is turned on and

the front Phan(tom) power LED will light.

IM PORTANT: Since the phantom power switch turns phantom

power on or oﬀ for both channels, there is no way to turn phantom

power on for one channel and oﬀ for the other channel. If you are

using the high impedance inputs the phantom power switch has no

eﬀect.

Front and Real Panels

When reading the following description of front and rear panel harware

features, it may be helpful to refer to the adjacent diagram.

8. Main Power Indicator LE

to the Audio Buddy and wh

Product specificaties

Merk:	Pinnacle
Categorie:	Receiver
Model:	AudioBuddy
Kleur van het product:	Zilver
Gewicht:	230 g
Stroomvoorziening:	AC 9V 0.5 A
Connectiviteitstechnologie:	Bedraad
Hoofdtelefoonuitgangen:	2
Equalizer-instellingen:	Nee
Aansluitingen:	2 x XLR\n4 x 1/4"
Audio-uitgangskanalen:	2.0 kanalen
Frequentiebereik:	5 - 50000 Hz
Lijnuitgang:	Ja
Signaal/ruis-verhouding:	-100 dB
Afmetingen (B x D x H):	86 x 45 x 140 mm
Inclusief RDS tuner:	Nee
Afstandsbediening inbegrepen:	Nee