Phonic DT88 Handleiding

Bekijk gratis de handleiding van Phonic DT88 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 21 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over Phonic DT88 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DT44 | DT88 EXPANSION CARD

1

English

INTRODUCTION

The DT44 and DT88 are Asystems’Dante

expansion cards for their digital matrix systems.

This allows for either 4x4 or 8x8 audio networking

with any other Dante-enabled Asystems product.

The DT44 and DT88 are compatible with the

Asystems DMP8800, DMP808, DMA8825,

DMA8813, DMA8425, DMA8813, NT2508,

NT2504, NT1308, NT1304 or NT4004.

Use this expansion card only with appropriate

Asystems models. Using third party hardware

could be detrimental to the operation of the

product.

DANTE CONTROL SOFTWARE

To effectively route signals through your DT

expansion card and your Aystems product,

Asystems suggests installation of the Dante

Controller routing software. This is available for

free on the Audinate website.

https://www.audinate.com/products/software/

dante-controller

Software is compatible with Windows 7, Windows

8.1 and Windows 10. It is also compatible with

Apple OSX 10.10.5, OSX 10.11.6 and macOS

10.12.

Extensive user documentation and tutorial videos

can be found on Audinate’s site to help explain

how the Dante Controller software operates.

For information on routing through the Asystems

product, refer to your product’s user guide.

INSTALLATION

Ensure the power cable is not connected to the

device when installing the DT expansion card.

This ensures there are no live components in the

device that could result in electric shock. If unsure,

consult a qualied engineer for installation.

1. Loosen the two screws and remove the cover

plate.

2. Connect the DT44 or DT88 Dante Networking

card.

3. Tighten the two screws back to secure the

cover plate.

Product specificaties