Philips SPS1020P Handleiding

Bekijk gratis de handleiding van Philips SPS1020P (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over Philips SPS1020P of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EN

Specifications

Transmitter

Receiver

Frequency315MHz

Receiving distance50 ft in open area (The number may be variable raccoding

to te ehnvironmennt ad battey corndition.)

Transmitter per inputDC 12V alkaline battery (size 23A)ow

Receiver per inputAC 125V electrical outletow

Receiver per output13 Amps / 125 VoltsResistiveow

13 Amps / 125 VoltsGeneral purpose

1000WTungsten

Federal Communication Commission

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference; and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Notice or the USAf

Thisun eqipmet hnsnas bee teted ad found to comply itwhh te limits for a Class

B digital device, pursuant to Parfhs. t 15 o te FCC RuleThsee limitigss are dened

to provide easornabrnle potectio agail inst harmfunterfencener i a residtialen

inn. stallatioThenenis equipmt geres, us,atse ann rruenr d caadiate adio eqfrcy enegy

and, if nnnot istalled ad daused i acconrnce whit thnrunnue istctio maal, may cause

harrfrmmmful inteerence to adio counications. However, there is no gua tharanteet

intferenwnerce ill ot occ a paur inrticularn istallatio

n. his equee If tipment dos caus

harmnrfful iteerenrrn rn, hce to adio o televisioeceptiowhic ca detene brmined

burniny tg te eqt ohuipmenff and on, the urse is eaged to ty to coect tncourrrrhe

intferenberce y oe o monrre of thfe ollowinms:g easure

•Relocate the receiving antenna.

•Increase the separation between equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Any changes or made to this device that are not expressly modifications

approved by Philips Consumer Lifestyle may void the user’s authority to operate

the equipment.

Installation

1.Mount the receiver on the wall near a grounded electrical outlet. The

nail or screw head must be extended at least 3/16” out from the wall.

2.Hang the receiver onto the nail or screw from the slot located at the

back of the receiver.

3.Plug the per cord of the receiver into the outlet. Then plug the ow

device cord into the receptacle at the bottom of the receiver.

4.

Pull out the battery isolated under the transmitter.film

Operation

1.Press ON on the transmitter to turn the receiver on.

2.Press OFF on the transmitter to turn the receiver off.

Outdoor remote control

SPS1020P

Product specificaties