Philips Senseo HD7830 Handleiding

Philips Koffiezetapparaat Senseo HD7830

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips Senseo HD7830 (4 pagina's) in de categorie Koffiezetapparaat. Deze handleiding was nuttig voor 79 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

HD7816, HD7814

HD7812, HD7810

HD7811

2 3 4 5

CLICK

7 8

10 11 12 13

14 15 16 17

18 19 20 21

22 23 24 25

26 27

ENGLISH

Introduction

With SENSEO®, you can enjoy a perfect cup of coffee

with a delicious crema layer whenever you feel like it.

Each cup is freshly brewed, so you’re always sure of a

pure and round taste. SENSEO® combines a unique

brewing method from Philips with convenient coffee

pods from Douwe Egberts, available in different blends

of ne roast and ground coffee. Together they make sure

you only get the very best in avour and aroma from the

coffee.

The Douwe Egberts coffee in convenient SENSEO®

coffee pods and Philips’ unique new SENSEO®

brewing system are perfectly matched to ensure that the

best taste and aroma are extracted from the coffee.

To optimise the taste of the coffee, keep the following

aspects in mind:

Fresh water

Use fresh water every day. If you have not used the coffee

machine for three days, you have to ush it with fresh

water before you use it again (see section ‘Flushing’ in

chapter ‘Cleaning’).

Fresh coffee pods

Use the SENSEO® coffee pods that have been specially

developed by Douwe Egberts for your SENSEO® coffee

machine for a full, round taste. Douwe Egberts SENSEO®

coffee pods stay fresh longer if you close the package

with the keep-fresh seal after use or if you store them in

a storage container.

A clean machine

Clean and descale the Philips SENSEO® coffee machine

regularly (see chapters ‘Cleaning’ and ‘Descaling’). Remove

used coffee pods after brewing. If a used pod has been

left in the coffee machine and you have not used the

machine for some time, ush the machine before you use

it again (see section ‘Flushing’ in chapter ‘Cleaning’).

General description (Fig. 1)

A Water reservoir

B Lid of water reservoir

C 1-cup pod holder q

D 2-cup/1-mug pod holder / qq w

E Coffee spout

F Cover of coffee spout

G Drip tray

H Cup tray

I Water distribution disc

J Sealing ring

K Outow valve

L Indicator light

Important

Read these instructions for use carefully before you use

the machine and save them for future reference.

Check if the voltage indicated on the bottom of

the machine corresponds to the local mains voltage

before you connect the machine.

If the mains cord is damaged, it must be replaced

by Philips, a service centre authorised by Philips

or similarly qualied persons in order to avoid a

hazard.

To prevent unexpected contact with hot water,

always make sure the lid of the SENSEO® machine

is properly locked before you start using the

machine.

Never put normal ground coffee or use torn pods

in the SENSEO® machine, as this causes it to

become blocked.

Do not use the machine in combination with

a transformer, as this could cause hazardous

situations.

Put the machine on a at, stable surface. Never let

the machine operate unattended.

Do not use the machine at altitudes higher

than 2200 metres above sea level.

The machine does not work at temperatures below

10°C.

Flush the coffee machine with fresh water before

you use it for the rst time (see chapter ‘Preparing

the machine for use’). This causes the boiler to ll

with water, which is essential for the machine to

work properly.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

It is very important that you descale your

SENSEO® machine every 3 months to prevent

malfunctioning. For the correct procedure, see

chapter ‘Descaling’.

Never interrupt the descaling process!

Always use the correct descaling mixture, i.e. 50

grams citric acid to 1 litre tap water.

Never turn your SENSEO® machine on its

side. Always keep it in upright position, also

during transport.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and in accordance with the instructions in this

instruction manual, the appliance is safe to use according

to scientic evidence available today.

Preparing the machine for use

You cannot brew coffee if you have not ushed the

SENSEO® coffee machine rst!

The ushing cycle causes the boiler to ll with water.

After this, the coffee machine is ready for use.

Flush the machine in the following way:

1 Remove the water reservoir (Fig. 2).

2 Fill the water reservoir with cold water up to

the indication and put it back onto the MAX

machine. (Fig. 3)

3 Move the lever upwards to release the lid (Fig. 4).

4 Open the lid (Fig. 5).

5 Put the 1-cup pod holder or the 2-cup/1-q

mug pod holder / in the machine without qq w

pod(s). (Fig. 6)

6 Close the lid and lock the lever (Fig. 7).

Note: Make sure you lock the lever properly. Push it down

until it snaps home with a click.

Note: Never ush the machine with the lid open. The lid

must be properly locked.

7 Put the plug in an earthed wall socket.

8 Put a bowl (with a capacity of at least 1500ml)

under the coffee spout to collect the water. (Fig. 8)

9 Press the on/off button and subsequently press I

the 1-cup button and the 2-cup/1-mug button q

qq w/ briey at the same time. (Fig. 9)

The boiler lls itself with water from the water

reservoir. This takes some time (approx. 90 to 150

seconds). The machine switches off automatically

when the ushing cycle ends. During the ushing

cycle, the machine produces more noise than

during a regular brewing cycle.

Note: Before you use the machine for the rst time, clean

the coffee spout and the pod holders with hot water and

some washing-up liquid or in the dishwasher. Clean the

water reservoir thoroughly in hot water, if necessary with

some washing-up liquid.

Now your Philips SENSEO® coffee machine is ready for

use.

Brewing coffee

1 Fill the water reservoir with cold water up to

the indication and put it back onto the MAX

machine. (Fig. 3)

Never pour milk, coffee, hot water or carbonated water

into the water reservoir.

q MIN: minimum amount of water required to brew

1 cup of SENSEO® coffee.

qq w/ MIN: minimum amount of water required to

brew 2 cups or 1 mug of SENSEO® coffee.

A full reservoir allows you to make SENSEO® coffee

a number of times (up to 5 cups). This makes it

unnecessary to ll the water reservoir each time you

want to make a cup of coffee.

2 Press the on/off button I. (Fig. 10)

The indicator light blinks while the water is heating up.

Heating up takes approx. 90 seconds.

The coffee machine is ready for use when the

indicator light burns continuously.

3 Move the lever upwards to release the lid (Fig. 4).

4 Open the lid.

5 Place the appropriate pod holder in the machine.

Note: Make sure the pod holder is clean and the sieve in the

centre is not clogged, e.g. with loose coffee grounds.

If you want to make one cup of SENSEO® coffee,

use 1 coffee pod in combination with the 1-cup pod

holder and the 1-cup button q q. (Fig. 11)

If you want to make two cups or one mug of

SENSEO® coffee, use 2 coffee pods in combination

with the deeper 2-cup/1-mug pod holder / qq

w qq w and the 2-cup/1-mug button / . (Fig. 12)

6 Place the SENSEO® coffee pod(s) properly in the

centre of the pod holder, with the convex side

pointing downwards.

Note: Use SENSEO® coffee pods from Douwe Egberts

specially designed for your SENSEO® coffee machine for a

full and round taste.

Place 1 SENSEO® coffee pod in the 1-cup pod

holder q. (Fig. 13)

Place 2 SENSEO® coffee pods in the 2-cup/1-mug

pod holder / qq w. (Fig. 14)

Note: Make sure the coffee in the pod(s) is evenly distributed

and press the pod(s) lightly into the pod holder.

Note: Never put normal ground coffee or use torn pods in

the SENSEO® machine, as this causes it to become blocked.

7 Close the lid and lock the lever (Fig. 7).

Always make sure the lid is properly locked. Push the

lever down until it snaps home with a click.

Never start brewing with the lid open. The lid must be

properly closed.

8 Place one cup, two cups or one mug under the

spout openings (Fig. 15).

If you are using cups, make sure they have a capacity of

approximately 150 ml. If you are using a mug, make sure

the mug has a capacity of approximately 280ml. Do not

use cups or mugs that are too large, as they will cause the

coffee to get cold more quickly.

Do not use cups or mugs that are too large, as they will

cause the coffee to get cold more quickly. If using one

cup or one mug, be sure to position the cup or mug

right under the coffee spout with its two openings.

9 Press the button that indicates the number of cups

of SENSEO® coffee you want to brew. (Fig. 16)

q for one cup

qq w/ for two cups or one mug

The SENSEO® coffee machine starts brewing.

The machine automatically supplies the optimal

amount of water.

You can interrupt the brewing process at any time

by pressing the on/off button . If you switch the I

machine back on after you have interrupted the

brewing process, the machine does not complete the

interrupted brewing cycle.

Do not remove the water reservoir during a brewing

cycle, as this causes the machine to draw in air. When

this happens, the next cup will only be partly lled.

Note: If you only get a small quantity of coffee or no coffee

at all out of the machine, you have not ushed the machine

properly before rst use. As a result, the boiler is not or not

completely lled. Flush the machine properly (see chapter

‘Preparing the machine for use’) before you brew another

cup of coffee.

10 After use, lift the pod holder out of the machine

and remove the coffee pod(s).

Be careful when you do this, for there may still be some

water/coffee on the coffee pod(s).

Tips

Rinse the pod holders and the coffee spout

regularly to make sure that the coffee always tastes

optimally.

The SENSEO® coffee tastes best if you stir it

before you drink it.

If you intend to make another cup of SENSEO®

coffee later, just leave the coffee machine switched

on. The machine automatically switches itself off

after 1 hour. (Fig. 17)

Cleaning

Never immerse the SENSEO® coffee machine in water.

Never clean the machine by ushing it with the lid open.

1 Always unplug the machine before you clean it.

2 Clean the outside of the machine with a moist

cloth.

3 Remove the coffee spout (Fig. 18).

You can disassemble the coffee spout for more

thorough cleaning. (Fig. 19)

4 Clean the coffee spout, the pod holders and the

drip tray in hot water, if necessary with some

washing-up liquid, or in the dishwasher (Fig. 20).

5 Hold the cup tray in your hand while you clean it

with hot water, if necessary with some washing-up

liquid (Fig. 21).

You can also clean the cup tray in the dishwasher.

To clean the cup tray, always remove it from the

machine, as it might prove sharp when it is handled

incorrectly. Always handle it carefully.

6 Clean the pod holders in hot water, if necessary

with some washing-up liquid, or in the

dishwasher. (Fig. 22)

Make sure the sieve in the centre of the pod holder is not

clogged. If the sieve is clogged, unclog it by rinsing the pod

holder under a running tap. If necessary, use a washing-up

brush or a pin to unclog the sieve.

7 Clean the water reservoir in hot water, if necessary

with some washing-up liquid. (Fig. 23)

Note: You can remove the cover of the water reservoir

to clean the inside thoroughly.

Note: If you use a washing-up brush, be careful not to

damage the valve in the bottom of the water reservoir.

8 Rinse the parts with fresh water after cleaning and

put them back into the machine.

9 Clean the water distribution disc with a moist

cloth (Fig. 24).

Be careful when you do this. Make sure that the rubber

sealing ring does not get stuck under the edge of the

water distribution disc. If it does, the coffee machine starts

to leak!

Flushing

If you have not used the coffee machine for three days,

ush it with fresh water before you use it again.

Flush the machine in the following way:

1 Fill the water reservoir with cold water up to

the indication and put it back onto the MAX

machine. (Fig. 3)

2 Put the 1-cup pod holder or the 2-cup/1-q

mug pod holder / in the machine without qq w

pod(s). (Fig. 6)

3 Put a bowl (with a capacity of at least 1500ml)

under the coffee spout to collect the water. (Fig. 8)

4 Press the on/off button and subsequently press I

the 1-cup button and the 2-cup/1-mug button q

qq w/ briey at the same time. (Fig. 9)

The machine lls itself with water from the water

reservoir. This takes some time and you will probably not

notice that this happens. After a while, the machine starts

to ush and switches itself off after the ushing cycle.

Descaling

When to descale

Descale the SENSEO® coffee machine frequently!

Preferably descale 4 to 6 times a year, but at least once

every 3 months. Descaling takes about 1 hour. Do not

interrupt the descaling process.

Why to descale

Scale builds up inside the appliance during use. It is

essential to descale the SENSEO® coffee machine at least

every 3 months. Your reasons to descale:

It prolongs the life of your SENSEO® coffee machine

It ensures maximum cup volume

It ensures maximum coffee temperature

The machine produces less sound during brewing

It prevents malfunctioning

If the descaling procedure is not performed correctly,

scale residue remains behind in the machine. This causes

scale to build up more quickly and may cause permanent

and irreparable damage to the machine.

Use the correct descaling agent

Only citric acid-based descalers are suitable for descaling

the SENSEO® machine. This type of descaler descales the

appliance without damaging it. For the correct amount,

see under ‘Descaling procedure’ below. Each descaling

mixture can be used only once. After use, the descaling

mixture is no longer active.

We advise you to use the special SENSEO® Descaler

(HD7006). Read the instructions on the package of the

descaling agent.

Never use a descaling agent based on mineral acids such

as sulphuric acid, hydrochloric acid, sulphamic acid and

acetic acid (e.g. vinegar). These descaling agents may

damage your SENSEO® coffee machine.

Descaling procedure

1 Mix 50 grams of citric acid with 1 litre of water in

a measuring jug. Stir until the powder is completely

dissolved.

2 Fill the water reservoir up to the MAX indication

with the descaler mixture. Then put the water

reservoir back into the coffee machine. (Fig. 3)

Note: Not all SENSEO® machine types have a water

reservoir with a capacity of 1 litre. If you have a SENSEO®

machine with a smaller water reservoir, repeat steps 2 to 6

with the remainder of the mixture without lling the water

reservoir up to the MAX indication.

3 Press on/off button I. (Fig. 10)

The machine is ready for use when the indicator light

burns continuously.

4 Place the 1-cup holder with a used coffee pod °

in it in the coffee machine. Close the lid and make

sure it is properly locked.

Note: Always put a used coffee pod in the pod holder when

you descale the machine. This pod serves as a ‘lter’ to

prevent the sieve or hole in the pod holder from getting

clogged with scale residue.

5 Put a bowl with a capacity of at least 1500ml under

the spout to collect the descaling mixture (Fig. 8).

6 Press the 2-cup button and let the machine °°

operate. Repeat this until the water reservoir is

empty. (Fig. 26)

Never interrupt the descaling process!

7 Repeat steps 1 to 6. Replace the used pod with

another used pod to lter out the scale residue.

Note: To descale properly, you have to use 2 litres of

descaling mixture.

Never descale the SENSEO® coffee machine with

the lid open. Make sure the lid is properly locked.

8 Rinse the water reservoir with tap water. Fill the

water reservoir up to the MAX indication with tap

water and repeat steps 3 to 6.

Note: Do not rell the water reservoir with used hot water or

the used descaling mixture.

9 Fill the water reservoir with fresh tap water up to

the MAX indication again and repeat steps 3 to 6

once more.

Note: Always rinse the machine by letting it empty two full

water reservoirs.

10 Remove the used pad and clean the pod holder

after descaling to prevent the sieve or hole in the

centre from getting clogged.

Frost-free storage

If the coffee machine has already been used and

therefore has been ushed with water, it may only be

used and stored in a frost-free place to prevent it from

becoming damaged.

Replacement

You can order all removable parts from your Philips

dealer or a Philips service centre.

Environment

Do not throw away the machine with the normal

household waste at the end of its life, but hand it in

at an ofcial collection point for recycling. By doing

this, you help to preserve the environment (Fig. 27).

Guarantee & service

If you need service or information or if you have a

problem, please consult the worldwide guarantee leaet

or visit our website at www.philips.com. You can also

contact the Philips Consumer Care Centre in your

country; they will be happy to help you.

The telephone number for the United Kingdom is: 0845

6010354 (local rate)

You nd the telephone numbers for other countries in

the worldwide guarantee leaet. If there is no Consumer

Care Centre in your country, turn to your local Philips

dealer or contact the Service Department of Philips

Consumer Lifestyle BV. You nd their address and fax

number in the worldwide guarantee leaet.

The purchase of the Philips SENSEO® coffee machine

does not exhaust any of the rights of Sara Lee/Douwe

Egberts or Philips under any of their patents nor does it

confer upon the purchaser a licence under these patents.

Troubleshooting

If you have a problem, you may nd the solution in the

table below. If the table does not provide the solution to

your problem or if you have a question, see the chapter

‘Guarantee & service’.

Problem Solution

The indicator

light continues

to blink slowly.

You have not yet ushed the coffee

machine (see chapter ‘Preparing the

machine for use’.

You have used the SENSEO® coffee

machine at an altitude higher than

2200 metres above sea level. This has

caused the water in the machine to

start boiling before it has reached the

required temperature. This prevents

the machine from functioning

properly. Switch off the machine and

no longer use it at altitudes higher

than 2200 metres above sea level.

The SENSEO®

coffee

machine does

not produce

coffee when

it is switched

on for the rst

time.

You have not yet ushed the coffee

machine. When you use the machine

for the rst time, you have to ush it

before you can start brewing coffee

(see chapter ‘Preparing the machine

for use’).

The indicator

light continues

to blink rapidly.

Make sure that:

you have placed the water

reservoir properly;

there is enough water in the water

reservoir (i.e. above the ° MIN

level if you want to brew 1 cup);

the ambient temperature is not

lower than 10°C. If it is, the machine

does not function properly.

Water

leaks from

the coffee

machine.

Make sure that:

Product specificaties

Merk:	Philips
Categorie:	Koffiezetapparaat
Model:	Senseo HD7830
Kleur van het product:	Rood
Ingebouwd display:	Ja
Snoerlengte:	1 m
Soort:	Koffie
Materiaal behuizing:	Kunststof
Vermogen:	1450 W
Capaciteit watertank:	1.2 l
Automatisch uitschakelen:	Ja
Land van herkomst:	Polen
Koffie invoertype:	Koffiepad
Capaciteit in kopjes:	8 kopjes
Koffiecapsule-/padsysteem:	Senseo
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Type product:	Koffiecupmachine
Type beeldscherm:	LCD