Philips AWH1110 Handleiding
Philips
Niet gecategoriseerd
AWH1110
Bekijk gratis de handleiding van Philips AWH1110 (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.6 sterren uit 2.5 reviews. Heb je een vraag over Philips AWH1110 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/12
Storag El ce ectri
Water He erat
Water Heating
AW 1H111
A 1WH112
AWH1121H/90
AWH1122H/90
A 0WH111
A 20WH11
A 2WH112
AWH1121B/90
AWH1122B/90
© 20 Aq d19 uaShiel
All rights reserved .
The Ph i alips tr demark Ph and the ilips Shield Emblem are registered trademarks
of Kon Philips Ninklijke .V. used under license .
This product ha s been ma litn iufactured by and is sold under the responsib y of
Hong Kong
Aqua i Sh eld Health Technology ompany Limited and C
Hong Kong
AquaShield Health
Technology Compa n my Li ited is the warrantor in relation to this produ ct.
Rev GA AU 19
www.p ilh ips.com/welcome
Register your product and learn more in the website link below:
User Manual 1-10
11-21
Manual Pengguna
High
Low
Heating
Power
High
Low
Security characteristics
1 01
Operating procedures
2 02
Product features
3 02
Product structure
4 03
Installation instructions
5 03
Pipe connection
6 04
Correct disposal of this product
7 04
Maintenance
8 08
Electrical connection
9 08
Wiring diagram
10 08
Guarantee and serv ice
12 10
Troubleshooting guide11 09
Packing list
13 10
CONTENTS
01
1 Security characteristics
The max inlet pressure is 0.8MPa(8bar).
Warning:
If the power cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualied persons in order to avoid a hazard.
The pressure-relief device is to be operated regularly to remove lime
deposits and to verify that is not blocked.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must be not supplied through an external
switching device, such as a timer, or connected to a circuit that is
regularly switched on and o by the utility.
This appliance can be used by children aged from 8 year s and above and
persons with reduced physic sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision
instruction concerning using of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not made by children without superv ision.
This electrical water heater must be installed with a mono-directional
safety valve at the inlet pipe (blue indica tor) when the ta nk’s pressure is
over 0.8MPa. Water will automat ically ow out from drain pipe outlet of the
safety valve (Diagram 1) if pressure exceeds 0.8Mpa. In any condition, this
outlet must not be blocked.
If you need to empty the water in the tank, rst please close the cold
water inlet. Remove the xed screw nail on the safety valve, lift up the
plastic handle (Diagram 2) so that the water can ow out naturally.
Diagram 1 Diagram 2
Water-drainage position
Water-drainage Spanner
Fixed Screw Nail
Safety Valve Outlet
0.8MP a
(8bar)
0.8MP a
(8bar)
03
5 Installation instructions
4 Product structure
The installation for electrical and plumbing work must be op erated by
qualied personnel, according to the installation instructions and in
compliance to the local authority regulations.
Unit has to be installed as near as possible to the service points, in order
to reduce heat loss along the pipes. To facilitate maintenance, allow a
distance of 50 cm for easy access to th e electrical parts.
This electric al water heater should be mounted on a solid cement wall,
preferably where it is close to the power source and water source.
Diagram 3
Diagram 3
Machine body
Machine body
Power indicator
Heating indicator
Heating indicator
Cold water inletHot water outlet
Cold water inletHot water outlet
Temperature
control knob
Temperature
control knob
AWH1110 AWH1111
AWH1120 AWH1121 AWH1122
AWH1121H/90 AWH1121B/90 AWH1122H/90 AWH1122B/90
02
2 Operating procedures
3 Product features
Ensure all the piping connection without leakage before turning on the
electric power of the heater.
Make sure tha t the tank is fully lled up with water, otherw ise th e heat ing
elements will be damaged.
Turn on the main electrical power supply and then adjust the temperature
knob clockwise for higher temperature and anti-clockwise for lower
temperature.
During the heat ing process, it's normal to se e a slight drip at the safety
valve. Please do not cover up the safety valve outlet.
Connect this outlet with a discharge pipe. Water may drip from the pipe,
therefore please keep it exposed to the atmosphere.
The safety valve is to be released regularly (preferably at least every six
months) to remove lime deposit and to ensure that it is not blocked.
Unique prole.
Sapphire golden silicon tank which is rust-proof, erosion-proof and with
higher eciency and having a longer life span.
Energy saving with minimum heat loss. The water temperature is able to
be maintained up to 48 hours after the elec tricity is switched o.
Product specificaties
| Merk: | Philips |
| Categorie: | Niet gecategoriseerd |
| Model: | AWH1110 |
Heb je hulp nodig?
Als je hulp nodig hebt met Philips AWH1110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Philips
15 Juni 2025
15 Juni 2025
15 Juni 2025
24 Mei 2025
24 Mei 2025
21 Mei 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
Handleiding Niet gecategoriseerd
- Baracuda
- Eve Audio
- Intesis
- Autotek
- Python
- Omron
- Muller
- Multimetrix
- ASSA ABLOY
- Tefal
- Companion
- GARANTIA
- Altronix
- Standard Horizon
- Casalux
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025