Phaesun Solar Rise One 2.0 Handleiding

Bekijk gratis de handleiding van Phaesun Solar Rise One 2.0 (2 pagina’s), behorend tot de categorie Zonnepaneel. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over Phaesun Solar Rise One 2.0 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Phaesun GmbH · Brühlweg 9 · 87700 Memmingen · Germany | Telefon +49

(

8331

)

990 42 0 · Telefax +49

(

8331

)

990 42 12 | info

@

phaesun.com · www.phaesun.com

1

2

Manual

Energy Generation Kit Solar Rise One 2.0

600077 • 05/2014

General safety instructions

Solar modules generate electricity in low incidence of light

too! Cover the solar panel and work carefully!

Make sure that the installation of the solar charge controller

takes place in a stable, flat and dry environment. Please note

to keep a distance of 15 cm around the unit!

Danger of explosion due to improper handling of batteries!

Danger of receiving an acid burn through the battery acid!

Keep children away from batteries and acid!

Please note the operating instructions of the solar charge

controller, the solar module and the battery as well!

When connecting the cables, make sure the polarity is correct!

All work must be carried out in compliance with the national

provisions and the local regulations!

Do not use defective components and keep the intended use

of the system!

Step 1

Remove the fuses during

the installation. Loosen the

screws distinguished with

a battery label at the solar

charge controller. Insert the

red labelled wire end sleeve

of the battery cable into the

positive contact (+) and the

blue labelled wire end sleeve

into the negative contact (–).

Tighten the screws.

Step 2

Remove the fuses during the

installation. Loosen the screws

marked with a battery label

at the solar charge controller.

Insert the red labelled wire end

sleeve of the battery cable into

the positive contact (+) and the

blue labelled wire end sleeve

into the negative contact (–).

Tighten the screws.

Connect batterie with solar charge controller

Solar charge controller

Battery

Battery cable

For the installation you need well isolated tools:

small screwdriverplierscarpet knife

Product specificaties