Peavey invective.112 Handleiding

Peavey Receiver invective.112

Bekijk gratis de handleiding van Peavey invective.112 (12 pagina’s), behorend tot de categorie Receiver. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.9 sterren uit 2.5 reviews. Heb je een vraag over Peavey invective.112 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/12
Peavey
®
invective
®
.112
20W Tube Guitar Amplier
www.peavey.com
Operating
Manual
Peavey
invective
®
.112 COMBO
Congratulations on the purchase of your new invective .112 tube guitar amplifier from Peavey! Although small, this amp has an all-
tube preamp and power amp to authentically produce the much loved tones of the Invective 120-- albeit at lower power levels. The
major advantage is the sheer size and weight (or lack thereof).
Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC line voltage
supplied. This is shown on the voltage selector switch near the IEC inlet on the rear panel of the unit. Refer to the rear panel diagram
in this manual to locate the particular feature next to its number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier. A careful reading of this manual
will also ensure you get the best out of your amplifier, by fully understanding its many features.
FEATURES:
2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes
Clean Channel with Low, Mid and High EQ
Lead Channel with 3 band EQ
Footswitchable Tight on Lead Channel
Footswitchable Gate and Boost on Lead Channel
Footswitchable Reverb
Gate Threshold Control
Footswitchable buffered effects Loop
Tube Status Indication (T.S.I.) circuit
Impedance switch for 16 or 8 ohm cabinets
MSDI™ Output with XLR and ground lift switch
• USB Output
Speaker defeat switch
• Headphone output
Attenuator switch for 20 watts, 5 watts or 1 watt output power
Master Resonance and Presence.
Celestion Vintage 30; 16 Ohms
High grade Poplar and Birch plywood cabinetry for light weight and tight, chunky low end
ENGLISH
VENTILATION: For proper ventilation, allow 24" clearance from the nearest combustible surface.
All vents should have a minimum of 2" of free air space so air can flow thru the unit freely for proper cooling.


Product specificaties

Merk: Peavey
Categorie: Receiver
Model: invective.112

Heb je hulp nodig?

Als je hulp nodig hebt met Peavey invective.112 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden