PCE Instruments Hi Temp 2400 Handleiding

PCE Instruments Hi Temp 2400

Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments Hi Temp 2400 (2 pagina's) in de categorie . Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

info@pce-americas.com

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

info@pce-instruments.com

Manual

Infrared Thermometer

Hi Temp 2400

Ref.No.：062010

-2

For Model with thermocouple socket

The non-contact infrared thermometer is the ultimate tool for temperature measurements. It can measure from 200 to 2400 ℃

(392 to 4352 oF) in the distance of 100:1 DS (Distance to Spot) ratio. Furthermore, the memory mode can record and display the

specific measurement with emissivity. There are many mathematical modes for the Infrared function.

* Please remember to keep away from children and don’t use it for safety related applications.

(Default Screen)

Simply aim the

thermometer at the

measure target with

Lens ( ○,11 ) and

press Meas. key (○,8)

to display the surface temperature. The Distance:Spot is 100:1. The two laser points are the

reference for the target spot size. Please make sure the target area is within the field of view.

FUNCTION

Press Emissivity key (○,2) for setting the emissivity

Press Emissivity key (○,2), then press Up key (○,4) or Down key (○,2) to set the emissivity, then press Mode

key (○,5) to confirm it. The emissivity can be changed from 0.10 (10E) to 1 (100E).

Press Mode key (○,5) for scrolling more display function as follows.

Here will show the emissivity data. (The default emissivity is 0.95.)

Press Mode key (○,5) for the Maximum (MAX), Minimum (MIN), Different between MAX and MIN (DIF) and

Average (AVG) modes. During the measurement, the special modes reading will be displayed beside the

mode icon.

Press Up key (○,4) or Down key (○,2) key to change the High Alarm (HAL) or Lo Alarm (LAL), then press

Meas. key (○,8) to confirm it. For example: When the reading 26.9oC < LAL 27 oC, the Low icon will flash and you

will hear a beep sound.

Connect the thermocouple with Thermocouple socket (○,7) and put the probe in/on the target, the thermometer

will display the temperature automatically without pressing any button. To see the minimum or maximum data

during the probe measurement, please hold down the Up key (○,4) or Down key (○,2).

After measure high temp, the probe may remain HOT for a while.

After taking the temperature, press Mode key (○,5) for the Memory (M00), then press Meas. key (○,8) to save

the measurement. Under the Memory (M00) , press Up key (○,4) or Down key (○,2) key to display the record.

** The thermometer will automatically shut off if left idle for more than 60sec.ADD VALUE

In MAX, MIN, DIF,

AVG mode:

Press Up key (○,4) for LOCK mode ON/OFF. The lock mode is particularly useful for continuous

monitoring of temperatures for up to 60 minutes.

Press Down key (○,2) for oC or oF transferred.

In all modes: First

hold on the Meas.

key (○,8)

and press Up key (○,4) for backlight function ON/OFF

and press Down key (○,2) for laser function ON/OFF.

(With flash light be turned on in the same time as laser )

CAUTION

1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE TWO LASER BEAMS–PERMANENT EYE DAMAGE MAY RESULT.

2. USE EXTREME CAUTION WHEN OPERATING THE LASER.

3. NEVER POINT THE DEVICE TOWARDS ANYONE’S EYES.

4. KEEP OUT OF REACH OF ALL CHILDREN.

STORAGE & CLEANING

It should be stored at room temperature. The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all times,

care should be taken when cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol. Allowing the lens to fully dry

before using the thermometer. Do not submerge any part of the thermometer.

LCD ERROR MESSAGES

The thermometer incorporates visual diagnostic messages as follows:

‘Hi’ or ’Lo’ is displayed when the temperature being measured is outside of the settings of HAL and LAL.

「」「」

‘Er2’ is displayed when the thermometer is exposed to rapid changes in the ambient temperature. ‘Er3’

is displayed when the ambient temperature exceeds 0oC (32°F) or +50oC (122°F). The thermometer

should be allowed plenty of time (minimum 30 minutes) to stabilize to the working/room temperature.

「」

Error 5~9, for all other error messages it is necessary to reset the thermometer. To reset it, wait for auto power

off, remove the battery and wait for a minimum of one minute, reinsert the battery and turn on. If the error

message remains please contact the Service Department for further assistance.

「」「」

‘Hi’ or ’Lo’ is displayed when the temperature being measured is outside of the measurement range.

BATTERIES

The thermometer incorporates visual low battery indication as follows:

‘Battery OK’: measurements

are possible

‘Battery Low’: battery needs to be

replaced, measurements are still possible

‘Battery Exhausted’: measurements are not

possible

When the ‘Low Battery’ icon indicates the battery is low, the battery should be replaced immediately with AAA, 1.5V batteries. Please note: It

is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction.

Dispose of used battery promptly and keep away from children.

SPECIFICATION

Item

Non-contact Infrared Scan function

Thermocouple Probe Scan function

(K type; probe not included.)

Measurement Range

200.. +2400 oC (392 .. +4352 oF)

-64 to +1400°C (-83.2 to +2552°F)

Operating Range

0 to +50°C (32 to +122°F)

Emissivity Range

0.95 default – adjustable 0.1 to 1 step .01

Resolution

0.1°C/0.1°F at -83.2 to 999.9(°C/°F), otherwise 1°C/1°F

Response Time (90%)

1 sec.

Distance:Spot

100:1

Memory

Detailed 24 Memories with Temperature & Emissivity

Battery Life

Typ.180, min 140 hours continuous use (Alkaline, without Laser and Back Light.)

Dimensions

60.6 x 207.5 x 233.8mm(2.38×8.17×9.20 inch)

Weight

475 grams(16.75 oz) including batteries (AA*2pcs)

Note: Under an electromagnetic field of

3V/m from 90 to 360 MHz the

maximum error is +/-10°C

EMC/RFI: Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per

meter, but the performance of the instrument will not be permanently affected.

Product specificaties

Merk:	PCE Instruments
Categorie:
Model:	Hi Temp 2400

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments Hi Temp 2400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding PCE Instruments

PCE Instruments PCE-RCM 10 Handleiding

22 September 2023

PCE Instruments PCE-RCM 11 Handleiding

22 September 2023

PCE Instruments PCE-LRF 600 Handleiding

22 September 2023

PCE Instruments Hi Temp 2400 Handleiding

22 September 2023

PCE Instruments PCE-PCO 1 Handleiding

22 September 2023

PCE Instruments PCE-RCM 15 Handleiding

22 September 2023

PCE Instruments PCE-PCO 2 Handleiding

22 September 2023

PCE Instruments PCE-322A Handleiding

22 September 2023

Handleiding

Nieuwste handleidingen voor

Onbekend AXHW-20a-xxx Handleiding

17 Oktober 2023

Home Electronic he 800m wh Handleiding

17 Oktober 2023

Onbekend K3 IR thermometer Handleiding

17 Oktober 2023

Home Electronic br 660 Handleiding

17 Oktober 2023

Home Electronic Freezz 12000M Handleiding

17 Oktober 2023

Onbekend TF-600 Non Contact Thermometer Handleiding

17 Oktober 2023

Home Electronic ED8525HSA Handleiding

17 Oktober 2023

Go On EKS 1835-2 Handleiding

17 Oktober 2023

Sagab By Elma 900 - Volt test Handleiding

15 Oktober 2023

Sagab By Elma Magnet Stick Handleiding

15 Oktober 2023