Patton SmartNode Branch eXchange Handleiding
Patton
Niet gecategoriseerd
SmartNode Branch eXchange
Bekijk gratis de handleiding van Patton SmartNode Branch eXchange (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 113 mensen en kreeg gemiddeld 4.9 sterren uit 57 reviews. Heb je een vraag over Patton SmartNode Branch eXchange of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/8

SNBX Voip Gateway Appliance
Quick Start Guide
Important—This is a Class A device and is intended for use in a light
industrial environment. It is not intended nor approved for use in an
industrial or residential environment.
REGULATORY MODEL NUMBER: 07MSNBXGW-QS
Part Number: 07MSNBXGW-QS, Rev. A
Revised: December 22, 2014
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: support@patton.com
WWW: www.patton.com

2SNBX Quick Start Guide
• Do not open the device when the power cord is con-
nected. For systems without a power switch and with-
out an external power adapter, line voltages are
present within the device when the power cord is con-
nected.
• For devices with an external power adapter, the power
adapter shall be a listed Limited Power Source The
mains outlet that is utilized to power the device shall
be within 10 feet (3 meters) of the device, shall be eas-
ily accessible, and protected by a circuit breaker in
compliance with local regulatory requirements.
• For AC powered devices, ensure that the power cable
used meets all applicable standards for the country in
which it is to be installed.
• For AC powered devices which have 3 conductor power
plugs (L1, L2 & GND or Hot, Neutral & Safety/Protec-
tive Ground), the wall outlet (or socket) must have an
earth ground.
• For DC powered devices, ensure that the interconnect-
ing cables are rated for proper voltage, current, antici-
pated temperature, flammability, and mechanical
serviceability.
• WAN, LAN & PSTN ports (connections) may have haz-
ardous voltages present regardless of whether the
device is powered ON or OFF. PSTN relates to inter-
faces such as telephone lines, FXS, FXO, DSL, xDSL,
T1, E1, ISDN, Voice, etc. These are known as “hazard-
ous network voltages” and to avoid electric shock use
caution when working near these ports. When discon-
necting cables for these ports, detach the far end con-
nection first.
• Do not work on the device or connect or disconnect
cables during periods of lightning activity.
In accordance with the requirements of council directive
2002/96/EC on Waste of Electrical and Electronic Equip-
ment (WEEE), ensure that at end-of-life you separate this
product from other waste and scrap and deliver to the
WEEE collection system in your country for recycling.
WARNING

SNBX Quick Start Guide 3
1.0 What’s Included With the SNBX
1. SNBX with Windows Embedded Standard 7 installed
2. AC Power Adaptor
3. INS-KIT-2
•1 x D89 to RJ45 control port Adaptor (EIA-561)
•2 x RJ45 Cables 10ft
•Rubber Feet
4. Rack Ears and Hardware (already installed)
5. Electrical Safety Notice
6. Quick Start Guide
2.0 Steps for Setting Up the SNBX
1. Plug a mouse into USB
2. Plug a keyboard into USB
3. Plug a monitor into either VGA or HDMI
4. Plug the power adaptor into the power connector on the back of the unit
Note Make sure the power adaptor is plugged in ALL the way and the
connector in locked in.
Figure 1. SNBX basic connections
Product specificaties
Merk: | Patton |
Categorie: | Niet gecategoriseerd |
Model: | SmartNode Branch eXchange |
LED-indicatoren: | Stroom |
Frequentie van processor: | 2000 MHz |
Stemcodecs: | G.711,G.723,G.726,G.727,G.729ab |
Montagewijze: | Rekmontage |
Aantal Ethernet LAN (RJ-45)-poorten: | 4 |
Certificering: | EN55022, EN5502, FCC Part 15, Part 68, CS-03 |
Netvoeding: | 102 W |
Intern geheugen: | 4000 MB |
Intern geheugentype: | DDR3L |
Type processor: | Ja |
Ingangsspanning: | 100 - 240 V |
Netwerkstandaard: | IEEE 802.1Q,IEEE 802.1p |
Frequentie: | 50 - 60 Hz |
Output current: | 8.5 A |
Spanning: | 12 V |
Veiligheid: | EN 60950 |
Aantal geïnstalleerde processoren: | 1 |
VLAN=ondersteuning: | Ja |
DHCP client: | Ja |
Aantal kanalen: | 12 kanalen |
Afmetingen (B x D x H): | 483 x 305 x 44 mm |
DMZ support: | Ja |
Beheerprotocollen: | Web/HTTP, CLI, TFTP, SNMP |
Bedrijfstemperatuur (T-T): | 0 - 40 °C |
Relatieve vochtigheid in bedrijf (V-V): | 0 - 90 procent |
Foreign eXchange Station (FXS) ports hoeveelheid: | 4 |
Foreign eXchange Office (FXO) ports hoeveelheid: | 4 |
Verkeerstatistieken: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Patton SmartNode Branch eXchange stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Patton
29 Mei 2023
20 April 2023
9 Januari 2023
8 Januari 2023
2 November 2022
15 Oktober 2022
Handleiding Niet gecategoriseerd
- Hegel
- Vivotek
- Atlas Sound
- Leuze Electronic
- Verto
- Seaward
- Paidi
- Sabco
- Cosatto
- AvaValley
- Zehnder
- Audio Pro
- Tru Components
- SMS
- Smartwares
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025