Parkside PHKSZ 9 A1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Parkside PHKSZ 9 A1 (19 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 92 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
IAN 36642
SAW BLADE PHKSZ 9 A1
GEBLATT
Sicherheitshinweise
SAW BLADE
Safety instructions
GKLINGA
Säkerhetsanvisningar
SAHANTERÄ
Turvallisuusohjeet
GB / IE Safety instructions Page 1
FI Turvallisuusohjeet Sivu 5
SE Säkerhetsanvisningar Sidan 9
DE / AT / CH Sicherheitshinweise Seite 13
Always keep the safety instructions in a safe place and hand them over to the new owners when the product is sold.
Säilytä turvallisuusohjeet hyvin ja liitä ne tuotteen mukaan, jos myyt/luovutat tuotteen eteenpäin.
Ta väl vara på säkerhetsanvisningarna och lämna över dem tillsammans med produkten om du överlåter den till
någon annan person.
Bewahren Sie die Sicherheitshinweise gut auf und händigen Sie sie bei Weitergabe des Produkts an Dritte mit aus.
1PHKSZ 9 A1
GB
IE
The circular saw blades comply with DIN EN 847-1.
They are composite tools in which the hard metal (HW
or HC) cutting blades have stellite (ST) or polycrystalline
diamonds (DP) applied to the saw blade body using
material adhesion (in this case brazing).
The respective circular saw blades can be used for
diff erent materials depending on the number of teeth:
12 teeth = at teeth with alternating chamfers suitable
for use on construction sites: thick and thin
wood materials, building timber, shuttering
boards, porous concrete, chipboard.
42 teeth = trapezoid fl at teeth, suitable for universal
use on profi les and solid materials:
composite materials, coated chipboard,
plastics, perspex, non-ferrous metals, hard
wood. Produces an especially clean cut.
48 teeth = at alternating teeth suitable for universal
use on soft and hard wood, panel materi-
als, fi brous materials, MDF and PVC.
Produces an especially clean and precise-
edged cut.
Store the circular saw blades in the original packaging,
or protect the saw blade against damage using other
means.
Store the saw blades somewhere dry and not in the
vicinity of aggressive media. There is a serious risk of
injury when handling circular saw blades due to the
extremely sharp cutting teeth.
Only use circular saw blades as intended for separation,
cutting to length, grooving of wood, wood materials and
associated materials such as plastics, light and alloyed
metals in addition to composite materials. Always follow
the manufacturer's instructions.
Use with manual and/or mechanical feed.
The working method is counter-rotation, synchronous
rotation is only permitted with mechanical feed. The
correct direction of rotation must be observed and the
maximum speed may not be exceeded. The machine
manufacturer's regulations must be observed.
Always have circular saw blades carefully checked for
damage or faults by experts before fi tting. If there are
any visible or otherwise recognisable defects or damage,
SAW BLADE PHKSZ 9 A1
Safety information for circular saw blades
Read before initial use!
Wear protective
gloves!
Wear respiratory
protection!
Wear protective
glasses!
Wear hearing
protection!
Disconnect from mains before all
assembly and maintenance work!


Product specificaties

Merk: Parkside
Categorie: Niet gecategoriseerd
Model: PHKSZ 9 A1

Heb je hulp nodig?

Als je hulp nodig hebt met Parkside PHKSZ 9 A1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Parkside

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd