Panduit R4PFL Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Panduit R4PFL (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010 CM486
Finger Cable Managers for 4 Post Racks
Part Number(s): R4PFL,R4PFR
R4PFL R4PFR
(4) #12-24 X 12” Hex Head
Bonding Screws
(included with both R4PFL
and R4PFR)
Note: R4PFL and R4PFR are sold separately.
R4PFL Installation:
• The R4PFL may be installed anywhere on the outside of the left front post where a server or equipment will be installed.
• For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-
ing Screws. Be sure that finger flags are pointing upward. See Figure 1.
• If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and
fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 2.
R4PFL
Finger flags
pointing upward
#12-24 X 1/2” Hex
Head Bonding Screws
Vertical Patch Panel Bracket
(CVPPB)
Front of rack
Front of rack
Figure 1 Figure 2
E-mail:
cs@panduit.com
Fax:
(708) 444-6448
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
Page 2 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010 CM486
www.panduit.com
R4PFR Installation:
• The R4PFR may be installed anywhere on the outside of the right front post where a server or equipment will be installed.
• For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-
ing Screws. Be sure that finger flags are pointing upward. See Figure 3.
• If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and
fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 4.
R4PFR
Finger flags
pointing upward
#12-24 X 1/2” Hex Head
Bonding Screws
Vertical Patch Panel Bracket
(CVPPB)
Front of rack Front of rack
Figure 3 Figure 4
FINGER REMOVAL
Score Grooves
Apply inward pressure
Score grooves are designed into fingers to accommodate easy and
clean finger removal.
To remove fingers, apply inward pressure to finger ends to snap off
fingers at hte score groove. See Figure 5.
Figure 5


Product specificaties

Merk: Panduit
Categorie: Niet gecategoriseerd
Model: R4PFL
Kleur van het product: Zwart
Breedte: 33 mm
Diepte: 268 mm
Hoogte: 491 mm
Duurzaamheidscertificaten: RoHS

Heb je hulp nodig?

Als je hulp nodig hebt met Panduit R4PFL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Panduit

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd