Panduit N82SPS Handleiding

Panduit Niet gecategoriseerd N82SPS

Lees hieronder de 📖 handleiding in het Nederlandse voor Panduit N82SPS (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

INSTRUCTIONS CM614A

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

-A

CCESS

N-Type Network Cabinets

(Side Panels - N21SPS, N51SPS, N22SPS, N52SPS

)

Page 1 of 2

Side Panel Support Bracket Installation

• Secure Side Panel Support Bracket to cabinet frame with [2] M5 Torx Screws.

[2] M5 Torx Screws

(use T25 Torx bit)

Side Panel Support

Bracket

INSTRUCTIONS CM614A

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp www.panduit.com

E-mail:

techsupport@panduit.com

Phone:

866-405-6654

Page 2 of 2

Spring Loaded Hinge Pin

(Top and Bottom)

Move Finger Pull into

Slot to Lock Hinge Pin

in OPEN position

(Front Side Panel only)

Rear Side Panel

Front Side Panel

Rear Side Panel

Cover Plate

Plunger

Grommet Front Catch Plate

Front Front

Side Panel Installation

• Rear Side Panel with Bumper Plate to be installed first.

• Remove [2] top Cover Plates of Rear Side Panel by pulling plunger slightly to release Cover Plate. (Bumper Plate will be to center of

cabinet.)

• Tilt the Rear Side Panel and insert [2] bottom Hinge Pins into bushing and slot of Support Bracket. Pull top Spring Loaded Hinge Pins

and engage with cabinet frame and Top Cap.

• Ensure Catch Plate on Front Side Panel is facing center of cabinet. Pull and lock [3] Spring Loaded Hinge Pins of Front Side Panel

leaving the bottom rear hinge pin in the released position. Insert bottom rear hinge pin into bushing of Side Panel Support Bracket..

Release rear top Spring Loaded Hinge Pin and ensure that panel is engaged with cabinet frame. Close Panel and release front Hinge

Pins.

• to remove In-Row Side PanelsREVERSE STEPS

IMPORTANT: Remove Rear Split doors prior to Removal and Installation. Install Rear Side Panel First

Bumper Plate

Product specificaties

Merk:	Panduit
Categorie:	Niet gecategoriseerd
Model:	N82SPS
Kleur van het product:	Zwart
Breedte:	1183.6 mm
Diepte:	1219 mm
Hoogte:	2233.7 mm
Duurzaamheidscertificaten:	RoHS
Rackcapaciteit:	42U