Panduit LCA4-38-L Handleiding

Bekijk gratis de handleiding van Panduit LCA4-38-L (4 pagina’s), behorend tot de categorie Compressor. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.8 sterren uit 4 reviews. Heb je een vraag over Panduit LCA4-38-L of wil je andere gebruikers van dit product iets vragen? Stel een vraag

COPPER COMPRESSION CONNECTORS

For Technical Support: panduit.comtechsupport@

Page 1 of 4

INSTALLATION INSTRUCTIONST-PMPI-63-PC

C

Panduit Corp. 2024

Rev11

1.Use a connector marked for the wire size and wire material to be used. NEVER

use a copper connector on aluminum wire.

2.

Strip wire insulation to approximate length shown on tool chart. DO NOT nick

or

ring the conductor strands.

3.

Clean the wire.

4.

Insert stripped wire into connector until the wire stops.

5.

Using installation tooling shown on other side, insert connector in die and crimp

between color bands or knurl markings, use these markings as a guide to evenly

space crimps on barrel of connector. Begin crimping near the tongue end of

the lug and continue crimping toward the wire end.

IMAGES BELOW DEPICT CRIMP ZONES, AND SERVE AS GENERAL GUIDELINES FORA

THE CRIMP AREA. REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL

CHART IN ( ) ON PAGES 2,3 & 4 BASED ON TOOL AND DIE COMBINATION USED.

6.

After crimping, inspect for sharp edges, flash or burrs and remove if present.

COPPER COMPRESSION CONNECTOR INSTALLATION

1

1 2

1 2 3

1 2 3 4

# ZONESOF CRIMP: 1

# ZONESOF CRIMP: 2

# ZONESOF CRIMP: 3

# ZONESOF CRIMP: 4

Product specificaties