Panduit FMTPRR6 Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Panduit FMTPRR6 gratis online of download de PDF. 6 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
8.Depress the green lever a few times and verify that the cleaning tape is advancing properly.
PN433A
Page 1 of 4
For Technical Support: www.panduit.com/resources/install_maintain.asp
OPERATING INSTRUCTIONS
© Panduit Corp. 2009
PN433AOPERATING INSTRUCTIONS
© Panduit Corp. 2009
Page 4 of 4
E-mail:
Fax:
(708) 444-6993
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
MTP* Cleaning Tools
Part Numbers: FMTPFCT, FMTPMFCT, FIBCCT, FMTPRR6
READ ALL INSTRUCTIONS COMPLETELY BEFORE PROCEEDING
TABLE OF CONTENTSPage(s)
Safety Precautions....................................................................................................2
Important Connector Cleaning Information...............................................................2
FMTPFCT Instructions - Cleaning Female MTP* Connectors..................................2
FMTPMFCT Instructions - Cleaning Male MTP* Connectors...................................3
FIBCCT Instructions - Cleaning Q
UICKNET Cassette MTP* Connectors...................3
FMTPRR6 Instructions - Replacing FMTPFCT and FMTPMFCT Cleaning Reel....4
*MTP is a registered trademark of US Conec Ltd.
FMTPFCTFMTPMFCT
FIBCCTFMTPRR6
(Contains 6 reels)
MTP* Female Fiber Cleaning ToolMTP* Male Fiber Cleaning Tool
Q
UICKNET Cassette MTP* Cleaning ToolCleaning Reel Refill for FMTPFCT and FMTPMFCT
FMTPRR6 - Replacing FMTPFCT and FMTPMFCT Cleaning Reel
1.The cleaning reel should only be replaced in a clean and dust free environment. A contaminated cleaning
reel may cause damage to fibers.
2.Use a coin or
screwdriver to
loosen the screw
located on the
front of the
FMTPFCT or
FMTPMFCT
Fiber Cleaning
Tools.
3.Open and
remove the
cover using the
finger grip on
the side of the
tool.
4.Remove the
cleaning reel and
winding reel by
lifting them
straight out of the
tool. Remove the
cleaning tape
from the winding
reel. Do not
discard the blue
winding reel.
5.Place the empty
winding reel
next to the new
cleaning reel as
shown. Detach
the adhesive
tape from the
cleaning reel
and attach to the
winding reel.
6.Place the winding
reel and the
cleaning reel into
the tool and route
the cleaning tape
as shown on the
diagram located
on the tool cover.
7.Hook the cover
on the tool body
and swing the
cover closed.
Tighten the
screw.
*MTP is a registered trademark of US Conec Ltd.
Winding Reel
Cleaning Reel
Hooks
Product specificaties
| Merk: | Panduit |
| Categorie: | Niet gecategoriseerd |
| Model: | FMTPRR6 |
Heb je hulp nodig?
Als je hulp nodig hebt met Panduit FMTPRR6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Panduit
Panduit CC6X88BL Handleiding Panduit PWBIB2 Handleiding Panduit PR2HF3 Handleiding Panduit WMPHF2E Handleiding Panduit CBXQ2EI Handleiding Panduit CEST2-E12 Handleiding Panduit CEST1-C5 Handleiding Panduit CEG-14X1 Handleiding