Panasonic SL-SX291 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic SL-SX291 (6 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Safety
1. Power sourceConnect the unit to a power
source of the type described in these instructions or
as marked on the unit.
2. PolarizationThe unit is equipped with a polar-
ized power plug where one blade is wider than the
other. This safety feature ensures that the plug fits
into your household AC outlet only one way. If the
plug doesn’t fit one way, try reversing it. If the plug
still doesn’t fit, contact an electrician to replace the
obsolete outlet. Do not attempt to defeat the safety
purpose of the plug.
3. Power cord protectionRoute the AC power sup-
ply cord so that it will not be walked on or pinched
by items placed on or against it. Never take hold of
the plug or cord with wet hands. Always grasp the
plug body firmly when connecting and disconnect-
ing it.
4. OverloadingWhen connecting the AC power
supply cord, be careful not to overload the house-
hold AC outlet, extension cord, or outlet from any
other device as this can result in fire or electric
shock.
5. Nonuse periodsTurn the unit off when it is not in
use. Unplug the unit from the household AC outlet if
it is not to be used for a long time. Unplug the unit
during lightning storms. Leaving the unit connected
to a household AC outlet for extended periods can
cause battery fluid leakage.
6. Attachments and accessoriesUse only the at-
tachments and accessories recommended in these
operating instructions.
Installation
Placement
1. Foreign materialEnsure objects and liquids do
not get into the unit. Avoid exposing the unit to ex-
cessive smoke, dust, mechanical vibration, and
shock.
2. MagnetismSituate the unit away from equipment
and devices that generate strong magnetic fields.
3. StackingDo not place anything on top of this
unit.
4. Wall and ceiling mountingDo not mount the
unit on walls or ceilings unless specified in the in-
structions.
Environment
1. Water and moistureDo not use the unit near
water, such as near a bathtub or swimming pool.
Avoid damp basements.
2. HeatSituate the unit away from heat sources,
such as radiators. Do not leave it in an automobile
exposed to direct sunlight with the doors and win-
dows closed as this may deform the cabinet.
2. Do not situate where temperatures fall below 5 oC
(41 C (95 oF) or rise above 35 o oF).
Maintenance
(See page 6 for details.)
Unplug the unit from the household AC outlet before
cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring powders, or sol-
vents.
Service
1. Damage requiring serviceThe unit should be
serviced by qualified service personnel if:
1. (a) The AC power supply cord or AC adaptor has
been damaged; or
1. (b) Objects or liquids have gotten into the unit; or
1. (c) The unit has been exposed to rain; or
1. (d) The unit does not operate normally or exhibits
a marked change in performance; or
1. (e) The unit has been dropped or the cabinet
damaged.
2. Servicing—Do not attempt to service the unit be-
yond that described in these operating instructions.
Refer all other servicing to authorized servicing per-
sonnel.
3. Replacement parts—When parts need replacing
ensure the servicer uses parts specified by the
manufacturer or parts that have the same charac-
teristics as the original parts. Unauthorized substi-
tutes may result in fire, electric shock, or other
hazards.
4. Safety check—After repairs or service, ask the
servicer to perform safety checks to confirm that
the unit is in proper working condition.
Before connecting, operating or adjusting this product, please read these instruc-
tions completely. Please keep this manual for future reference.
Concerning Compact Discs
Only compact discs bearing this mark can be used with this unit.
However, continued use of irregular shaped CDs can damage the unit.
If the surface is dirty
Wipe it with a damp cloth and then wipe dry.
Wipe from the center toward the outer circumference.
How to hold a disc
How to store the disc in its case
How to remove a disc from its case
Play surface (shiny surface)
Label side up
Handling precautions
If you are taking the CD from a cold to
a warm environment, moisture may
form on the CD. Wipe this off with a
soft, dry, lint-free cloth before using
the CD.
Do not write on the label side with a
ball-point pen or other writing instru-
ment.
Do not use record cleaning sprays,
benzine, thinner, static electricity pre-
vention liquids or any other solvent.
Do not attach labels or stickers to
CDs. (Do not use CDs with exposed
adhesive from tape or left over peeled
off stickers.)
Do not use scratch-proof protectors
etc.
Storage precautions
Be sure to store CDs in their cases to
protect them from dust, scratches, and
warping.
Do not place or store CDs in the
following places
Locations exposed to direct sunlight
Humid or dusty locations
Locations directly exposed to a heat
vent or heating appliance
In the glove compartment or on the
rear deck of an automobile
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating in-
structions handy for future reference.
This manual was printed with soy based ink.
Panasonic Consumer Electronics Company,
p
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com
Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infanter a, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985í
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.ca
C 2002 Matsushita Electric Industrial Co., Ltd.
RQT6580-P F0402TH0
Printed in Japan
P
Use numbers indicated in parentheses when asking for replacement parts.
(Only for U.S.A.) To order accessories contact 1-800-332-5368 or web site
(http://www.panasonic.com).
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety,
please read these instructions carefully. Model No. SL-SX293/
SL-SX290/
SL-SX291C
Portable CD Player
Operating Instructions
The model number and serial number
of this product can be found on either
the back or the bottom of the unit.
Please note them in the space pro-
vided below and keep for future refer-
ence.
MODEL NUMBER
SERIAL NUMBER
SL-SX291C ONLY
To install this product in a car, please
refer to the Installation Instructions“ ”.
Supplied Accessories
Check the packing carton for these accessories.
Stereo headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
For SL-SX293 For SL-SX290 For SL-SX291C
(L0BAD0000160) (RFEV715P-KS) (RFEV715P-SS)
Car adaptor (SH-CDC12PEY) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Car stereo cassette adaptor (SHCDM10B1PYK) . . . . . . . . . . . . . . . . . . . . 1
SL-SX291C ONLY
PC
Using the AC adaptor
(not included)
Use only the recommended AC adaptor. Use of other
AC adaptors can damage the unit.
Connect the AC adaptor.
Conserving power
To save power when the unit is not to be used for a long
time, unplug the AC adaptor from the household AC
outlet. Reprogram tracks if necessary before use.
Note!
Turn the unit off before connecting or disconnecting the
AC adaptor.
I
A D
E
F
H
B C
C
GG
NM
KJ L
This function causes the unit to ignore
short, accidental button presses. (The
disc lid can still be opened and closed.)
The HOLD function prevents the
following:
The unit is powered on accidentally
when not in use, causing the batteries
to run down.
A button is accidentally pressed during
play, interrupting the operation.
To use the HOLD function
Set [HOLD] to the HOLD position.
(” indication
When the unit is in HOLD mode, press-
ing any button causes the indication
“ ”( to appear on the display.
When the unit is powered off
The “ ”( indication appears only
when [1;] is pressed.
2
Power Supply Preparations
Refer to the specifications (page 6) for information on operating times when using dry cell batteries.
Using dry cell batteries
(not included)
Insert two “LR6, AA, UM-3alkaline bat-
teries.
Battery indicator
This indicator flashes when the batteries are almost out
of power. Power is cut off completely a short while later.
Replace batteries with new ones.
Note!
The length of time the unit will continue to operate be-
tween when the battery indicator starts flashing and
when the power is cut off differs depending on the type
of batteries used.
Using the car adaptor
SL-SX291C includes a car adaptor. Refer to the sepa-
rate Installation Instructions“ ”.
For SL-SX293 and SL-SX290, obtain the car adaptor
(SH-CDC9) available as an optional accessory.
Use only the recommended car adaptor. Use of other
car adaptors can damage the unit.
Removing batteries
Push up on the battery
in the direction indicat-
ed by the arrow. Then
lift it out.
If the battery lid
comes loose
Slide the lid back into
place horizontally.
If the unit malfunctions or freezes during use,
disconnect the power source (the AC adaptor
or batteries).
Re-connect the power source and continue op-
eration.
1+
-
2
3
CAUTION:
Use only car adaptor, Model: SH-CDC9 manufac-
tured by Matsushita Electric Industrial Co., Ltd.
DC IN jack (DC IN 4.5 V )K
Back panel of the unit
Household
AC outlet
(AC 120 V)
AC adaptor
S-XBS TRAIN
TRAIN
TRAIN
TRAIN
TRAIN
ALL
ALL
ALL
ALLALL
RANDOM
RANDOM
RANDOM
RANDOMRANDOM
SORR
SORR
SORR
SORRSORRY
Y
Y
YY
1
1
1
11
M
M
M
MM
C
C
C
CC
Battery indicator
Location of Controls
HOLD
Back panel of the unit
HOLD mode
Before operating the buttons
Be sure to move [HOLD] to release
the unit from the HOLD mode.
HOLD Function
Note!
The dry cell batteries should be changed when the unit is off.
Using rechargeable batteries
(not included)
If rechargeable batteries are to be used, rechargeable
batteries manufactured by Panasonic are recommended.
This unit cannot recharge batteries. The battery indi-
cator will not function correctly when using recharge-
able batteries.
ADisplay
BMemory/recall button
(MEMORY/RECALL)
CHeadphone volume control
buttons (VOL i j, )
DEQ button (EQ)
EMode button ( )MODE
FPlay/pause button (1;)
GSkip/search buttons
(:, 9 6 , 5)
HStop/operation off button
(,OPR OFF)
IHold switch (HOLD)
JHeadphone jack (Ë)
KCD release button (PUSH)
LOpen switch (OPEN 1)
MHole for car mounting base
NDC IN jack
(DC IN 4.5 V K)
For U.S.A.
To order the optional AC adaptor RP-AC46 contact
1-800-332-5368 or web site (http://www.panason-
ic.com).
For Canada
Be sure to obtain the optional AC adaptor RP-AC46.
It is available through your Panasonic dealer.
Button Display/reference
3
Operation
To pause play
To stop play
To turn off the
unit
Skip forward/
backward
(skip function)
Rapid forward/
backward
(search function)
Off mode
Stop mode
Sequential Play
Basic Play
Follow steps 15.
In step 3: (Plug in firmly.)Connect the stereo headphones to the headphone jack [Ë].
In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when
pressed while the level is displayed. If any other display is shown, it changes to show the current level.
(The volume returns to 10 when you disconnect the power source.)
Play stops automatically when all the tracks have been played.
If the unit has been connected to the car audio system, set this unit s volume to 10, then adjust the volume level on the system.
For your reference:
“ ”) indication
This indication appears for about 30 seconds if [1;] is
pressed when no disc is loaded in the unit or if the disc
is not properly secured.
“ ”* indication
This indication appears for about 10 minutes when the
cover is opened. (However, the indication does not ap-
pear when the unit is powered off.)
Removing discs
1Press [, OPR OFF] to stop play and disc
rotation.
2Slide [OPEN ] to open the lid.1
3Press [PUSH] to release the disc.
Do not stop the disc by hand or try to remove it before it
stops rotating. This can damage CDs.
Note!
Never insert foreign objects into the unit.
Auto power off function
If the unit is left in stop mode for approximately 10 min-
utes, the unit powers itself off automatically in order to
prevent the battery from running down.
(If no disc is loaded in the unit, it powers itself off in
about 30 seconds.)
During program play (page 4), these buttons are
used to skip forward or backward through the
programmed sequence of tracks.
You cannot skip to tracks that have been played
in random or random repeat play (page 4).
During program play, 1-track repeat play, random
play and random repeat play (page 4), search op-
eration is limited to the current track only.
Press during play.
Press during play.
Press during stop mode.
Press during play.
(Press [ ] twice to skip to the:
beginning of the previous tracks.)
Press again to restart play.
Press and hold during play.
P
U
S
H
P
U
S
H
3
2
15
4
HOLD
VOL
VOL
S-XBS
VOL
TRAIN
ALL
RANDOM
SORRY
1
M
C
C
C
CC
O
P
R
O
F
F
OPEN
S-XBS
VOL
TRAIN
ALL
RANDOM
SORRY
1
M
C
C
C
CC
LR
Label must face upward.
Track number in play
Elapsed playing time of each track
O
P
R
O
F
F
O
P
R
O
F
F
Backward
Forward
Total number of tracks
Total playing time
Plug type:
3.5 mm (1/8 in.) stereo
Resume function notes
Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re-
main active if you replace a disc in the off mode.)
Play may resume from the beginning of the next track if you stopped play near the end of a track.
The resume function works automatically and cannot be turned off.
Increase
Decrease
Note on CD-R and CD-RW
This unit can play CD-DA format audio CD-R and
CD-RW that have been finalized§upon completion
of recording. It may not be able to play some CD-R
or CD-RW due to the condition of the recording.
§Finalizing is a process that enables CD-R/CD-RW
players to play audio CD-R and CD-RW.
Close the lid.
No indicator is shown.
Resume function
Play starts from the beginning of
the current track the next time you
press [1;].
The resume function remains active.
This system deals with skipping in a variety of ways:
An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
The 40-second anti-shock memory fills in interruptions
caused by bumps and vibrations.
The anti-skip system works automatically while the
When bumps continue repeatedly
The message appears on the display andSORRY
sound is interrupted.
Anti-Skip System
S-XBS
VOL
TRAIN
TRAIN
TRAIN
TRAIN
TRAIN
ALL
RANDOM
SORRY
1
M
C
C
C
CC
A
Note!
While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
The anti-skip memory compresses digital signals.


Product specificaties

Merk: Panasonic
Categorie: CD-spelers/recorder
Model: SL-SX291

Heb je hulp nodig?

Als je hulp nodig hebt met Panasonic SL-SX291 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding CD-spelers/recorder Panasonic

Handleiding CD-spelers/recorder

Nieuwste handleidingen voor CD-spelers/recorder