Panasonic PT-LB80 Handleiding

Panasonic Beamer PT-LB80

Lees hieronder de 📖 handleiding in het Nederlandse voor Panasonic PT-LB80 (62 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/62

ENGLISH

Operating Instructions

LCD Projector

Model No. PT-LB80NTU

PT-LB80U

PT-LB75NTU

PT-LB75U

Before operating this product, please read the instructions carefully and save this manual for future use.

TQBJ0244

Commercial Use

Important

Information

ENGLISH - 2

Important Safety Notice

Dear Panasonic Customer:

The following information should which will enable you be read and understood as it provides details, to operate the

projector in a manner which is both safe to you and your environment, and conforms to legal requirements regarding

the use of projectors. Before connecting, operating or adjusting this projector, please read these instructions

completely and save this booklet with the projector for future reference. We hope it will help you to get the most out

of your new product, and that you will be pleased with your Panasonic LCD projector.

The serial number of your product may be found on its bottom. You should note it in the space provided below and

retain this booklet in case service is required.

Model number: PT-LB80NTU / PT-LB75NTU/ /PT-LB80U PT-LB75U

Serial number:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

Power Supply: This LCD Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current

only.

CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for

power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will

need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, fire

may result.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

CAUTION: This equipment is equipped with a three-pin grounding-type power

plug. Do not remove the grounding pin on the power plug. This plug

will only fit a grounding-type power outl ty feature. If et. This is a safe

you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug.

Pursuant to at the directive 2004/108/EC, article 9(2)

Panasonic Testing Center

Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, F.R. Germany

NOTICE:

AThis product has a High Intensity Disch ury. Dispose may be regulated in arge (HID) lamp that contains merc

your community due to environmental considerations. For disposal or recycling information, please contact

your local authorities, or the Electronic Industries Alliance: http://www.eiae.org

Do not remove

Important

Information

Important Safety Notice

ENGLISH - 3

Information on Disposal in other Countries outside the European

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct

method of disposal.

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occu on. If this er in a particular installati quipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION: To assure continued compliance, follow the attached installation instructions and use only

shielded interface cables when connecting to computer and/or peripheral devices. Any

changes or modifications not expressly approved by Panasonic Corp. of North America could

void the user's authority to operate this device.

FCC RF Exposure Warning: (if provided with wireless device)

- This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment.

- This equipment has been approved for mobile operation and requires minimum 20 cm spacing be provided

between antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless

modes of operation.

- This equipment may not be used with other installed transmitters, which may be capable of simultaneous

transmission.

WARNING:

ANot for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

AFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the

building installation wiring.

AFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily

accessible.

Declaration of Conformity

Model Number: PT-LB80NTU / PT-LB75NTU/PT-LB80U PT-LB75U/

Trade Name: Panasonic

Responsible party: Panasonic Corporation of North America

Address: One Panasonic Way, Secaucus, New Jersey 07094

Telephone number: (888) 411 - 1996

E-mail: projectorsupport@us.panasonic.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product specificaties

Merk:	Panasonic
Categorie:	Beamer
Model:	PT-LB80
Gewicht:	3000 g
Geluidsniveau:	30 dB
Soort lamp:	UHM
Stroomvoorziening:	100–240 V AC, 50/60 Hz
Ethernet LAN:	Nee
Typische contrastverhouding:	500:1
Projector helderheid:	3200 ANSI lumens
Projectietechnologie:	LCD
Projector native resolution:	XGA (1024x768)
Keystone correctie, verticaal:	30 °
Geschikt voor schermmaten:	- "
Projectie-afstand objectief:	1.1 - 10.5 m
Frequentiebereik horizontaal:	15 - 91 kHz
Frequentiebereik verticaal:	50 - 85 Hz
VGA (D-Sub)poort(en):	2
Soort serieële aansluiting:	RS-232
Audio-ingang (L, R):	1
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
S-Video ingang:	1
DVI-poort:	Nee
Brandpuntbereik:	1.64 - 1.87 mm
Levensduur van de lichtbron:	3000 uur
Type lichtbron:	Lamp
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	1 W
Stroomverbruik (in standby):	4 W
Formaat analoog signaal:	NTSC,PAL,SECAM
RS-232 port:	1
Lampvermogen:	220 W
Beeldverhouding:	4:3
Audio (L,R) out:	1
Maat:	0.63 "
Focusbereik lens:	18.8–22.56 mm
Eenvormigheid:	85 procent
Afmetingen (B x D x H):	368 x 233 x 88 mm
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
Stroomverbruik (typisch):	300 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent