Paladin SC 24.10 Handleiding
Paladin
Tijdschakelklok
SC 24.10
Bekijk gratis de handleiding van Paladin SC 24.10 (2 pagina’s), behorend tot de categorie Tijdschakelklok. Deze gids werd als nuttig beoordeeld door 44 mensen en kreeg gemiddeld 5.0 sterren uit 22.5 reviews. Heb je een vraag over Paladin SC 24.10 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
BA SC24 M; GB - 22520 - 2008.08-01
Programming manual SC 24
In mode AUTO manual
switching possible by
pressing relevant key
1 ⇒ Monday
2 ⇒ Tuesday
3 ⇒ Wednesday
4 ⇒ Thursday
5 ⇒ Friday
6 ⇒ Saturday
7 ⇒ Sunday
⇒ Channel ON
⇒ Channel OFF
⇒ IMPULSE
01 - 59 sec.
Programming
Key functions
[ Menu ] Selection of programming modes
AUTO → PR → ? → → S/W → AUTO ...
[ CL ] Cancelling of inputs in modes
PR; ? and .
[
◆] In PR; ?;
and S/W modes:
Change flashing digit resp. position.
In Mode ?:
Change selected inputs.
[ O.K.] Confirm the selected mode.
In PR and
modes:
Head for required position. (forwards)
In? mode:
Head for next switching time.
In S/W mode:
Enter into memory.
[◄] In PR and
modes:
Return to required position. (backwards)
In PR mode:
Head for holiday programme when 1 (Monday)
is flashing.
In ? mode:
Return to switching time before.
[ A ] In AUTO mode:
Press for manual override ON or OFF.
Holding down key for 3 seconds, will switch ON
or OFF PERM override. perm will be displayed.
Programmed function in relevant channel will
be suppressed.
Cancel permanent ON or OFF by holding down
key for a further 3 seconds, perm will disappear.
Programming advice
The default setting on delivery is programmed real
time and date, the summertime change is activated.
Programming possible also with time switch
disconnected: Press O.K., display appears, start
programming.
Make inputs step by step. The appropriate position in
the display is flashing and can be changed by pressing
◆ key. Head for next position by using O.K. key, go
backwards by using ◄ key. Inputs are terminated
when flashing finishes.
Installation details
The installation and assembly of electrical
equipment must be only carried out only by a
skilled person.
Connect to voltage and frequency according to type
label only.
Warranty void if housing opened by unauthorised
person.
The high density electronic circuit is protected against
a wide range of external influences. Incorrect operating
may occur if external influences exceed certain limits.
Operating modes
AUTO Display of time, day of week, switch status of
channel(s). Also indication of actual day’s
programme in full hours.
2 – channel – version: Change of the indication
channel A/channel B every 10 seconds.
Manual overriding possible (KEY A, B)
PR Input of switching commands according to
week day(s) and time, also the holiday
programme
Use arrow ◄ and O.K. keys to alter flashing digit.
Use diamond
◆ key to increase value.
(Confirm last input with O.K. key, will enter into
memory)
If Monday 1 is flashing, use the ◄ key to
select the holiday programming.
? Displays number of free memory locations
Show switching times
Alter switching time
Clear single or all switching times
Use O.K. key forwards or ◄ key backwards to
display switching times.
Use diamond
◆ key to change (alter)
displayed switching time.
Use CL key to cancelling the displayed
switching time.
Use CL key twice to cancel all switching times if
number of free memory locations available
displayed only.
Input of actual date and time
Use arrow ◄ and O.K. keys to alter flashing
digit.
Use diamond ◆ key to increase value.
(Confirm last input with O.K. key, will enter into
memory and change into AUTO mode)
S/W To activate / deactivate the summer/winter
time change over.
Use diamond
◆ key to select automatic S/W –
time change ON or OFF.
(Confirm last input with O.K. key, will enter into
memory and change into AUTO mode)
Reset
Press and hold down all three keys ◄; O.K. and CL ,
will clear date, real time and microprocessor Switching
programmes normally will not be affected.
(Check by Read – Out; “?” mode)
The
mode is selected because date and real time
must be programme new.
Wiring diagrams SC 24
SC 24.10
external key
Channel A - ON/OFF
The external [ON/OFF]
override has the same
function as the channel
A button on the front
Use same phase
for external [ON/OFF],
terminal No. 5 and
terminal No. 2 only
Examples
mode
Current date and real time input or change
Example: Date 01.02.2000; time 14:00
after Reset
O.K. 3x
◆
1x
O.K. 2x
O.K. 1x
◆ 1x
O.K. 1x
◆ 4x
O.K. 3x
Mode PR
Programming day or week programme
Several possibilities:
1. Single day, one channel
2. Several days, one channel.
Example: Tuesday (2) and Thursday (4) to Sunday (7);
Switching time 19:00; Channel A ON;
Start from: AUTO mode
Menu 1x
O.K. 1x
◆ 1x
O.K. 2x
◆ 1x
O.K. 1x
O.K. 4x
◆ 1x
O.K. 1x
◆ 9x
O.K. 3x
◆ 1x
O.K. 1x
Continue with input of further dates / functions or press
key Menu
1x to return to mode AUTO.
PR mode Holiday programming
Start and End programming by
date
Programming for certain channels (permanently ON /
OFF), while others carry out the week programme.
Example: Start 20.04; End 24.04
Channel A OFF (permanent)
Start from: AUTO mode
Menu 1x
O.K. 1x
◄ 1x
◆ 2x
O.K. 3x
◆ 4x
O.K. 1x
◆ 2x
O.K. 1x
◆ 4x
O.K. 2x
◆ 4x
O.K. 2x
◆ 2x
O.K. 1x
Continue with input of further dates / functions or press
Menu
key
1x to return to AUTO mode.
The holiday programme does not occupy a storage
location.
By input a new holiday programme the old holiday
programme is overwrite.
The hoilday programme is clear at the end of the
holiday programme and the outputrelais goes into the
state of the switching programme. (Prgramme review)
S/W mode
Deactivate automatic summertime changes
(daylight saving)
The default setting on delivery, S/W time change is
activated. Initial form: AUTO mode
Menu 4x
O.K. 1x
◆ 1x
O.K. 1x
The S/W –
time
change is
deactivated
The time changeover is executed automatically
according to the „European Regulation“.
Start: Last Sunday in March
End: Last Sunday in October
? mode
Display or alter switching times
Example: Alter Tuesday and Thursday to Sunday
19:00;
Channel A ON; Channel B IMPULSE
into : Wednesday to Sunday 19:30;
Channel A ON; Channel B ON
Start from: AUTO mode
Menu 2x
O.K. 1x
Number of
free storage
locations
available
O.K. 1x
◆ 1x
O.K. 1x
◆ 1x
O.K. 1x
◆ 1x
O.K. 7x
◆ 3x
O.K. 2x
◆ 1x
O.K. 1x
Number of
free storage
locations
available
Menu 1x
? mode
Cancel function
Example: Cancelling holiday programme
Start: 20.04 End: 24.04
Sart from: AUTO mode
Menu 2x
O.K. 1x
Number of
storage
locations
available
O.K. 1x
CL 1x
Menu 1x
If CL key is pressed twice while free storage locations
available are displayed, all inputs are cancelled.
(Clear all
)
Red: Flashing symbol in display
Product specificaties
| Merk: | Paladin |
| Categorie: | Tijdschakelklok |
| Model: | SC 24.10 |
Heb je hulp nodig?
Als je hulp nodig hebt met Paladin SC 24.10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Tijdschakelklok Paladin
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
20 Augustus 2023
Handleiding Tijdschakelklok
- Blokker
- UPM
- Wachsmuth - Krogmann
- Tevion
- Perel
- TimeControl
- Schneider Electric
- Quigg
- Orbis
- Praxis
- GE
- Silvercrest
- Brennenstuhl
- Masterclear
- Theben
Nieuwste handleidingen voor Tijdschakelklok
16 Februari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
19 Mei 2024
19 Mei 2024
19 Mei 2024