PAC CM-1 Handleiding


Bekijk gratis de handleiding van PAC CM-1 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 29 mensen en kreeg gemiddeld 4.3 sterren uit 15 reviews. Heb je een vraag over PAC CM-1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
Pacific Accessory Corporation - 1502 S. Santa Fe Street, Santa Ana, CA 92705
techsupport@pac-audio.com • Voice: 714-835-3022 • Fax: 714-835-3233 • www.pac-audio.com
CM1
Chime Module
For the OS-2 or
OS-2BOSE Interface
OS2-RAD
1
9
10
18
12
CM1
General Motors Class II Chime Module
Pacific Accessory Corporation Santa Ana, CA 92705
Must be used with the OS-2 or OS-2BOSE Interface
Yel - Constant +12volts
Blk - Chassis ground
Org - To OS-2 or
OS-2BOSE
+12volts
To pin# 12
CM1 Installation Instructions:
Unplug the OS2-RAD cable from the interface
prior to wiring the CM1.
1. Connect the CM1’s BLACK wire to the OS2-RAD BLACK wire.
2. Connect the CM1’s YELLOW wire to the OS2-RAD YELLOW wire
3. Insert the CM1’s ORANGE wire with the MOLEX pin into
pin location #12 of the OS2-RAD (18 pin) MOLEX plug.
Do not use force! Pin will snap in with minimal effort, if inserted
correctly.
4. Plug the OS2-RAD plug back into the interface .
5. When first powered up, the CM1 will chime one time to indicate
proper power connection. All warning chimes are now retained.
6-15-06
Pacific Accessory Corporation


Product specificaties

Merk: PAC
Categorie: Niet gecategoriseerd
Model: CM-1

Heb je hulp nodig?

Als je hulp nodig hebt met PAC CM-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden