PAC APH-TY01 Handleiding

Bekijk gratis de handleiding van PAC APH-TY01 (42 pagina’s), behorend tot de categorie Hifi systeem. Deze gids werd als nuttig beoordeeld door 13 mensen en kreeg gemiddeld 4.0 sterren uit 2 reviews. Heb je een vraag over PAC APH-TY01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Speaker Connection Harness for Select

Toyota Vehicles with Factory Ampliers

Equipped with a 10-Pin and 12-Pin Connector

C

Page 1

Copyright © 2019. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

APH-TY01

Rev: V1

Date: 010419

Introduction and Features

The APH-TY01 simplies speaker wire connections when adding aftermarket ampliers. Aftermarket ampliers can be

easily added with no need to cut or modify a vehicle’s original wiring. Each pair of wires has been labeled with the

corresponding speaker name.

Wiring Overview

Harness 1 (APH-TY01 12P):

Installation Notes

1. It is always best to use a tone generator (PAC part number TL-PTG2) to verify that the tables in this manual, and the labels

on the wires, match the wiring in your specic vehicle. This is important as there are instances where different trim levels of

the factory system may have the speaker outputs in different locations.

2. Not all applicable vehicles will come equipped with a corresponding speaker for all of the wires populated in our harness. It is

important to understand which speakers are equipped in your vehicle.

3. If you are leaving any of the factory speakers connected to the factory amplier, simply connect the speaker wires (color for

color) between the male and female connectors. For example: If you want the rear speakers to be powered by the factory

amplier, simply connect the Green, Green / Black, Purple and Purple / Black wires from the male connector to the Green,

Green / Black, Purple and Purple / Black wires from the female connector.

4. For vehicles that lose audio output when there is no load on the speaker outputs of the factory amplier, PAC load resistors

will be required (PAC Part Number LR335 or LR475).

1. Locate the vehicle’s factory amplier and disconnect the 10-pin and 12-pin connectors.

2. Connect the APH-TY01 harness to the connectors that were disconnected in the previous step.

3. Connect the male connectors from the APH-TY01 to the amplier.

4. Connect the longer loose wires from the APH-TY01 to your aftermarket amplier outputs or passive crossovers according to

the tables in this manual.

5. Insulate unused wires in the 10-pin and 12-pin connectors that plug into the factory amplier side of the APH-TY01.

Installation Steps

Connect to aftermarket amplier

output or passive crossover.

*Illustration is for reference only.

Your harness will have more wires*

PinNumber WireColorDescriptionLabel

1Black PassThrough(Ground)

6Brown PassThrough(Ground)

2 BlackPassThrough

3 BrownPassThrough

4 GrayFrontRight+

10 Gray/BlackFrontRight‐

11 OrangeSpeaker3+

5 Orange/BlackSpeaker3‐

12 BlueSpeaker4+

7 Blue/BlackSpeaker4‐

9 WhiteFrontLeft+

8 White/BlackFrontLeft‐

N/A

FRSpeaker

Speaker3

Speaker4

FLSpeaker

12‐Pin

Insulate any unused wires

APH-TY0112P

Speaker1

Speaker2

RRSpeaker

RLSpeaker

White / Black

White

Gray / Black

Orange

Blue

Black

Black

Brown

Brown

Gray

Orange / Blac

k

Blue / Black

1

7

8

12

Black

Black

Brown

Brown

1

7

8

12

Gray

Or

ange / Black

Blue / Black

White / Black

White

Gray / Black

Orange

Blue

Product specificaties