Ozito ZLHDK-150U Handleiding
Ozito
Boormachine
ZLHDK-150U
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ZLHDK-150U (2 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
1
BATTERY SAFETY WARNINGS
ELECTRICAL SAFETY
DESCRIPTION OF SYMBOLS
Warning
Do not use or store battery in
temperatures exceeding 50ºC
Volts Hertz
Alternating Current
Direct Current
Milliamperes
Watts
Amp Hour
Ah
W
HzV
ac/~
mA
Lithium Ion Battery
Do not put in the rubbish
Do not get battery wet
Recycle Battery
Do not incinerate
dc
ZLBP-015U
1.5Ah BATTERY
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 12V
Battery Capacity: 1.5Ah Li-Ion
Charge Times: 1hr (Fast Charger)
3-5hrs (Eco Charger)
ozito-diy.co.uk
1 2
1 Battery Release Button
2 Battery
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR
YOUR BATTERY CHARGER.
1. Before using the charger read all instructions and cautionary markings on the charger,
battery pack and the product using the battery pack.
2. This charger is not intended for any uses other than charging rechargeable batteries. Any
other use may result in risk of fi re, electric shock or electrocution.
3. Do not place any object on top of the charger or place the charger on a soft surface that
may result in excessive internal heat. Place the charger in a position away from any heat
source.
4. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the
cord when disconnecting the charger.
5. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
6. An extension cord should not be used unless absolutely necessary. Use of an improper
extension cord could result in the risk of fi re, electric shock or electrocution.
7. Do not operate the charger if it has received a sharp blow, been dropped or otherwise
damaged in any way. Have it checked by an electrician or power tool repairer.
8. Do not disassemble charger. Take it to an electrician or power tool repairer when
service or repair is required. Incorrect reassembly may result in a risk of electric shock,
electrocution or fi re.
9. To reduce risk of electric shock, unplug the charger from the outlet before attempting any
cleaning. Removing the battery pack will not reduce this risk.
10. Never attempt to connect 2 chargers together.
11. DO NOT store or use the tool and battery pack in locations where the temperature may reach
or exceed 40ºC (such as inside sheds or metal buildings in summer).
12. The charger is designed to operate on standard household electrical power (240 volts).
Do not attempt to use it on any other voltage!
13. The battery pack is not fully charged out of the carton. First read the safety instructions
and then follow the charging notes and procedures.
14. The longest life and best performance can be obtained if the battery pack is charged
when the air temperature is between 18 - 24ºC. Do not charge the battery pack in an air
temperature below 10ºC or above 40ºC. This is important and will prevent damage to the
battery pack.
15. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out.
The battery can explode in a fi re.
16. Never attempt to open the battery pack for any reason. If the plastic housing of the battery
pack breaks or cracks, immediately discontinue use and do not recharge.
17. During charging, the battery must be placed in a well ventilated area.
WARNING! When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce risk of fi re, electric
shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool o in an
emergency, before operating the tool. Save these instructions and other documents supplied
with this tool for future reference.
The charger has been designed for 230V and 240V only. Always check that the power supply
corresponds to the voltage on the rating plate.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for the UK.
This tools charger is double insulated; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in
order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating
this tool. The insulation system is for added protection against injury resulting from a possible
electrical insulation failure within the tool.
The power supply for this products charger should be protected by a residual current device
(rated at 30mA or less). A residual current device reduces the risk of electric shock.
Manual_ZLBP-015U.indd 1 06.08.2019 10:33:40
BATTERY PROTECTION SYSTEM
The tool is equipped with a battery protection system, which helps to
ensure longevity of the battery.
The output power automatically cuts o during operation when the tool
and/or battery are placed under the following situations:
• When the tool is overloaded:
If this occurs, release the trigger switch and remove causes of
overload, then pull the switch trigger again to restart.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way damage the
tool.
Note: The indicated capacity may be lower than the actual level during
use or immediately after using the tool.
ZLBP-015U
CHARGING YOUR LITHIUM ION BATTERY
This battery has been shipped in a low charge condition, and requires
charging prior to use. Allow several cycles of charging and discharging
(through use with a compatible tool) for the battery to reach its optimum
performance / runtime.
This battery has two compatible Ozito chargers available through your
local Bunnings Warehouse:
• ZLCG-112U Fast Charger
• ZLCG-312U Eco Charger
Only use the battery pack with Ozito Home 12Volt cordless
products.
1. Insert the power plug of the charger into the mains socket outlet.
The red LED on the plug will begin to illuminate when properly
connected to power supply.
2. Insert the battery pack into the battery charger .
3. Remove battery from the charger once fully charged. Disconnect
the charger from the power supply.
Note: The battery pack can become a little warm during the charging.
This is normal
If the battery pack fails to charge, check:
• if there is voltage at the socket outlet
• that the battery and charger are properly connected.
If the battery pack still fails to charge, please contact our customer
service center.
1. OPERATION WARRANTY
All of our products undergo strict quality checks to ensure that they
reach you in perfect condition. In the unlikely event that your device
develops a fault, please contact our service department at the address
shown on this guarantee card. You can also contact us by telephone
using the customer service number shown. Please note the following
terms under which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which
the manufacturer mentioned below promises to buyers of its new
products in addition to their statutory guarantee claims are not
affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on
a product which you have bought from the manufacturer mentioned
below are limited to either the rectification of said defects on the
product or the replacement of the product, whichever we prefer.
Please note that our devices are not designed for use in
commercial, trade or professional applications. A guarantee contract
will not be created if the device has been used by commercial, trade
or industrial business or has been exposed to similar stresses during
the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the
operating instructions (for example connecting it to an incorrect
mains voltage or current type) or a failure to follow the maintenance
and safety instructions or by exposing the device to abnormal
environmental conditions or by lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for
example overloading the device or the use or unapproved tools or
accessories), ingress of foreign bodies into the device (such as sand,
stones or dust, transport damage), the use of force or damage
caused by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or
natural wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 60 months from the
original date of purchase and is intended for DIY (Do It Yourself) use
only. Lithium Ion batteries and chargers are covered by a 12 month
warranty. Warranty excludes consumable parts, for example:
grinding discs. Guarantee claims should be submitted before the
end of the guarantee period within two weeks of the defect being
noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable
to the device even if repairs are carried out or parts are replaced. In
such cases, the work performed or parts fitted will not result in an
extension of the guarantee period, and no new guarantee will
become active for the work performed or parts fitted. This also
applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing
parts, consumables and missing parts as set out in the service
information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
iSC GmbH · Eschenstraße 6 · 94405 Landau /Isar · Germany
Manual_ZLBP-015U.indd 2 06.08.2019 10:33:40
Product specificaties
| Merk: | Ozito |
| Categorie: | Boormachine |
| Model: | ZLHDK-150U |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito ZLHDK-150U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Boormachine Ozito
26 Juli 2023
30 Juni 2023
19 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
14 Juni 2023
8 Juni 2023
24 Mei 2023
23 Mei 2023
Handleiding Boormachine
- Boormachine Bosch
- Boormachine IKEA
- Boormachine Panasonic
- Boormachine AEG
- Boormachine DeWalt
- Boormachine Baier
- Boormachine Basetech
- Boormachine Batavia
- Boormachine Bavaria
- Boormachine Berner
- Boormachine Black Decker
- Boormachine Blucave
- Boormachine Bort
- Boormachine Bruder Mannesmann
- Boormachine Defort
- Boormachine Delta
- Boormachine Dremel
- Boormachine Duro
- Boormachine Ecomac
- Boormachine Economy
- Boormachine Einhell
- Boormachine Elu
- Boormachine Fe Powertools
- Boormachine Fein
- Boormachine Felisatti
- Boormachine Ferm
- Boormachine Ferrex
- Boormachine Festool
- Boormachine Flex
- Boormachine Gamma
- Boormachine Global
- Boormachine Gude
- Boormachine Hikoki
- Boormachine Hitachi
- Boormachine Holzmann
- Boormachine Huvema
- Boormachine Hyundai
- Boormachine Kawasaki
- Boormachine Kinzo
- Boormachine Kress
- Boormachine Laserliner
- Boormachine Lux Tools
- Boormachine Luxor
- Boormachine Maestro
- Boormachine Makita
- Boormachine Maktec
- Boormachine Max
- Boormachine Metabo
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Powerfix
- Boormachine Powerplus
- Boormachine Protool
- Boormachine Robust
- Boormachine Rupes
- Boormachine Ryobi
- Boormachine Scheppach
- Boormachine Silverline
- Boormachine Skil
- Boormachine Spit
- Boormachine Stanley
- Boormachine Stihl
- Boormachine Stomer
- Boormachine Tanaka
- Boormachine Texas
- Boormachine Toolcraft
- Boormachine Toolland
- Boormachine Topcraft
- Boormachine Trotec
- Boormachine Varo
- Boormachine Velleman
- Boormachine Vonroc
- Boormachine Westfalia
- Boormachine Workzone
- Boormachine Worx
- Boormachine Wurth
- Boormachine Zipper
- Boormachine Black And Decker
- Boormachine Steren
- Boormachine Cocraft
- Boormachine Meec Tools
- Boormachine Genesis
- Boormachine Carat
- Boormachine Eibenstock
- Boormachine Hilti
- Boormachine Cotech
- Boormachine Power Craft
- Boormachine Tacklife
- Boormachine Truper
- Boormachine Fieldmann
- Boormachine Proxxon
- Boormachine Biltema
- Boormachine Malmbergs
- Boormachine Porter-Cable
- Boormachine Sun Joe
- Boormachine Dedra
- Boormachine Graphite
- Boormachine Narex
- Boormachine RIDGID
- Boormachine Tryton
- Boormachine Herkules
- Boormachine Sthor
- Boormachine Craftsman
- Boormachine Rikon
- Boormachine Verto
- Boormachine Alpha Tools
- Boormachine Hazet
- Boormachine G-Technology
- Boormachine Yato
- Boormachine Baumr-AG
- Boormachine Powerblade
- Boormachine Meister Craft
- Boormachine Wolfcraft
- Boormachine Kreg
- Boormachine Rok
- Boormachine RUKO
- Boormachine Einhell Bavaria
- Boormachine Ribimex
- Boormachine Ergotools Pattfield
- Boormachine MyTool
- Boormachine Rodcraft
- Boormachine Bavaria By Einhell
Nieuwste handleidingen voor Boormachine
16 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024
10 April 2024