Ozito RSH-2435 Handleiding
Ozito
Hakselaars
RSH-2435
Lees hieronder de đ handleiding in het Nederlandse voor Ozito RSH-2435 (8 pagina's) in de categorie Hakselaars. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
RAPID
SHREDDER
2400W
INSTRUCTION MANUAL
SPECIFICATIONS
Power Rating: 2400W (S6 40%), 2000W (S1)
No Load Speed: 4,000/min
Max Cutting: 40mmĂ
Noise Level: 112 dB
Blades: Reversible
Collection Bag: 60 litre
Protection Class: II (Double Insulated)
Weight: 11.2 kg
RSH-2435
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts and included accessories, for
example: Blades, push stick, collection bag and wheels.
WARNING
The following actions will result in the warranty being void.
⢠If the tool has been operated on a supply voltage other
than that speciîˇed on the tool.
⢠If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
⢠Failure to perform maintenance as set out within the
instruction manual.
⢠If the tool is disassembled or tampered with in any way.
⢠Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofîˇce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneîˇts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0318
Shredder Housing
Stand
Wheels x 2
Wheel Axle Wheel Caps x 2
Collection Bag
Push Stick
Holder
Push Stick
Axle Washers x 2 Axle Nuts x 2
Wheel Bush x 2 Wheel Spacer x 2
Screw and
Washer x 2
Spanner Hex Key
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
After removing the shredder from the
carton, check that the shredder has not
been damaged. Unpack the contents.
Fitting the wheels and stand
1. Carefully place the shredder housing
upside down on a îat surface. Place
each leg of the stand into the two holes
at the base of the shredder housing.
2. Using a screwdriver (not included)
secure the legs using the two
screws and washers provided, turn
in a clockwise direction.
3. Thread the wheel axle through
the leg stand.
4. Insert the wheel spacer followed by
the wheel bush onto each end of the
wheel axle.
1. Transport handle
2. Hopper
3. Locking knob
4. On/Off switch
5. Power cord
6. Motor housing
7. Collection bag hook
8. Discharge chute
9. Stand
10. Wheel
11. Push stick
12. Collection bag
13. Hex key
14. Spanner
RAPID SHREDDER
ACCESSORIES
KNOW YOUR PRODUCT
1. WHEELS & STAND
ASSEMBLY
1 2
3
4
5
6
7
8
9
14
WARNING! YOU MAY REQUIRE ASSISTANCE
LIFTING THE SHREDDER OUT OF THE CARTON.
11 12
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
10
13
Starting the shredder
1. Connect the power cord to an appropriate extension cord and plug
the extension cord into the mains power point.
Note: The device has a internal zero voltage switch. This prevents the
device restarting unintentionally after a power failure.
2. To start the shredder move the on/off switch to the
ON âIâ position. When the shredder is turned on
there will be a short delay before the motor starts
and the speed will îuctuate for a few seconds.
This is normal as the shredder is îżtted with a
preset speed controller designed to keep the
shredder at its optimal speed when in use.
3. To stop the shredder move the on/off switch
to the OFF âOâ position.
5. Insert each wheel over the wheel bush
ensuring that the larger inner diameter
of the wheel is facing outwards. This
allows the wheel cap to be îżtted.
6. Place the axle washer onto the
wheel axle followed by the axle
nut. Secure the îat of the wheel
axle with a 10mm spanner (not
included) and tighten the axle
nut using the spanner, turn in a
clockwise direction.
7. Place the wheel cap onto the
wheel and click in place.
8. Once fully assembled carefully
lift the shredder into its correct
position supported by the
stand and wheels.
2. STARTING
OPERATION
WARNING! PRIOR TO STARTING THE MOTOR
ENSURE THE SHREDDER IS EMPTY. ENSURE
YOU WEAR SAFETY GLOVES, SAFETY GLASSES AND
EARMUFFS WHEN THE SHREDDER IS IN USE.
WARNING! THE POWER SUPPLY FOR THIS
PRODUCT SHOULD BE PROTECTED BY A
RESIDUAL CURRENT DEVICE RATED AT 30 A OR LESS.m
9. Attach push stick holder to stand for
easy access of your push stick.
Product specificaties
| Merk: | Ozito |
| Categorie: | Hakselaars |
| Model: | RSH-2435 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito RSH-2435 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hakselaars Ozito
3 Oktober 2022
Handleiding Hakselaars
- Hakselaars Al-ko
- Hakselaars Atika
- Hakselaars Einhell
- Hakselaars Eliet
- Hakselaars Ferm
- Hakselaars Gamma
- Hakselaars Gardena
- Hakselaars Hyundai
- Hakselaars Lumag
- Hakselaars Powerplus
- Hakselaars Black And Decker
- Hakselaars Krausmann
- Hakselaars BBT
Nieuwste handleidingen voor Hakselaars
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022
3 Oktober 2022