Ozito PXHGS-550 Handleiding
Ozito
Heteluchtpistolen
PXHGS-550
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXHGS-550 (6 pagina's) in de categorie Heteluchtpistolen. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
STANDARD EQUIPMENT
PXHGS-550
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Power: 280W
Max. Temperature: 550°C
Max. Air Flow: 200L/min
Weight: 0.71kg
ozito.com.au
0919
Cordless Heat Gun
3 x Nozzles
CORDLESS
HEAT GUN
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting The Nozzles
The supplied nozzles can be used to suit different applications.
Use the concentrator nozzle for spot drying or
heating concentrated areas.
The at nozzle can be used for heating at, narrow
sections of a worksurface.
The spoon reector nozzle is good for providing
even heating around circular proles such as pipes
and tubes.
1. To attach the nozzle, simply
press it onto the nose of the
heat gun.
1. Nose
2. Nozzle Ejector Chuck
3. Hanging Hook
4. Safety Lock-Off Button
5. Sure Grip Handle
6. Battery Seating
7. On/Off Trigger
8. LED Worklight
9. Flat Nozzle
10. Concentrator Nozzle
11. Reector Nozzle
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS HEAT GUN
ACCESSORIES
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. NOZZLES & BATTERIES
SETUP & PREPARATION
2
6
84
5
7
1
3
11109
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Removing The Nozzle
The nozzle ejector function allows you to swap nozzles without having to
wait for it to cool.
1. To eject the nozzle, twist
the chuck of the heat gun
clockwise against the tool.
The nozzle will pop right off.
WARNING! ONLY HOLD THE PLASTIC PORTION OF
THE HEAT GUN. TOUCHING THE METAL NOSE CAN
CAUSE BURNS.
WARNING! BEWARE OF THE EJECTED NOZZLE
FALLING. CONTACT WITH SKIN CAN CAUSE BURNS
IF THE NOZZLE IS STILL SUFFICIENTLY HOT.
Fitting The Battery
1. Slide the battery into the
tool base until it clicks into
place.
2. To remove the battery, hold
down the battery release
button and then slide the
battery out.
Switching The Tool On/Off
1. Push and hold the lock-off button
to either side of the tool.
2. Pull the on/off trigger to start the
tool. You may now release the
lock-off button.
3. Release the on/off trigger to stop the heat gun
Note: The motor will continue running for a few seconds after you
release the trigger. This draws cool air over the heating elements, cooling it
faster and prolonging the life of the tool.
WARNING! THIS TOOL IS DESIGNED FOR INDOOR
USE ONLY. USING THIS TOOL FOR PROLONGED
PERIODS MAY CAUSE IT TO OVERHEAT AND
MALFUNCTION. ALLOW FREQUENT BREAKS FOR
THE TOOL TO COOL DOWN DURING USE.
LED Worklight
The inbuilt LED light automatically
switch on when the tool is started
up.
3. CONTROLS
OPERATION
a.
b.
Product specificaties
| Merk: | Ozito |
| Categorie: | Heteluchtpistolen |
| Model: | PXHGS-550 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PXHGS-550 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heteluchtpistolen Ozito
4 Oktober 2022
Handleiding Heteluchtpistolen
- Heteluchtpistolen Metabo
- Heteluchtpistolen Parkside
- Heteluchtpistolen Ryobi
- Heteluchtpistolen Steinel
- Heteluchtpistolen Vonroc
- Heteluchtpistolen Wagner
- Heteluchtpistolen Black And Decker
- Heteluchtpistolen Cocraft
- Heteluchtpistolen Meec Tools
Nieuwste handleidingen voor Heteluchtpistolen
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022