Ozito PXHFS-1218 Handleiding

Ozito Ventilatoren PXHFS-1218

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXHFS-1218 (6 pagina's) in de categorie Ventilatoren. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
STANDARD EQUIPMENT
12V DC
FAN SPEED
INPUT
12V DC
FAN SPE ED
INPUT
PXHFS-1218
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V DC
or 12V DC Car Outlet
No Load Speed: 1,700 - 2,600/min
Fan Blade: Ø230mm
Max. Air Speed: 14.4km/h
Max. Air Volume: 351.7cfm (166L/s)
Head Adjustment: 360°
Weight: 2.5kg
ozito.com.au
1119
Hybrid Fan
12V DC Car Outlet Cable &
Plug
HYBRID FAN
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
12V DC
FAN SPEED
INPUT
Attaching To A Wall
The mounting plate on the fan allows you to hang the unit on a wall to clear
up valuable bench space.
Use the appropriate screw type for the surface you are attaching the
bracket to. The recommended screw size is 6mm in diameter and at least
50mm long.
1. Fasten a screw halfway into the
wall at the desired height.
2. Place the groove of the mounting
plate on the screw and fasten the
srew fully into the wall.
3. For extra security, place another
screw through the hole in the
mounting plate.
Using The Hanging Hook
Where appropriate, the fan can also
be hung up with the supplied hook.
Note: Ensure the hook is placed
securely around the mounting bar.
1. Fan Housing
2. Carry Handle
3. Speed Control Switch
4. On/Off Switch
5. Battery Seating
6. 12V DC Cable Port
7. Hanging Hook
8. Wall Mounting Plate
9. Frame
10. Angle Adjustment Knob
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
HYBRID FAN
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. INSTALLING THE FAN
SETUP & PREPARATION
12V DC
FAN SPE ED
INPUT
1
2
10
9
7
8
6
3
5
4
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Using A Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
2. To remove the battery, hold down
the battery release button and
slide the battery out.
Using The 12V DC Car Plug
1. Pull out the plug from the 12V DC
socket.
2. Insert the 12V plug into the
socket on the fan and plug the
other end of the cable into a 12V
socket in your car.
WARNING! KEEP THE VEHICLE ENGINE RUNNING
WHILE USING THE FAN TO PREVENT DISCHARGING
THE VEHICLE BATTERY COMPLETELY.
Note: Replace the socket plug
when the 12V DC socket is not in
use to prevent dust from entering
the unit.
Changing The Airflow Direction
1. Loosen the angle adjustment
knobs on both sides of the unit.
2. Rotate the fan head to the
desired direction.
3. Tighten the angle adjustment
knobs to lock it in place.
Note: Do not overtighten the
adjustment knobs.
2. APPLYING POWER 3. ADJUSTING THE FAN
12V D C
FAN S PEED
IN P U T
12V DC
FAN S PEED
INP UT
12V D C
FAN SPEED
INP U T
a.
b.
12V DC
FAN S PEE D
INP UT
12V DC
FAN SPEED
INPUT
12 DCV
FAN SP EED
INPUT
12V DC
FAN S PEED
INPU T
12V DC
FAN S PEE D
INPUT


Product specificaties

Merk: Ozito
Categorie: Ventilatoren
Model: PXHFS-1218

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXHFS-1218 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ventilatoren Ozito

Handleiding Ventilatoren

Nieuwste handleidingen voor Ventilatoren