Ozito PXCJBLS-018 Handleiding
Ozito
Bladblazers
PXCJBLS-018
Lees hieronder de đź“– handleiding in het Nederlandse voor Ozito PXCJBLS-018 (6 pagina's) in de categorie Bladblazers. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
CORDLESS
JET BLOWER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V x 2
No Load Speed: 11,000 - 21,000/min
Max. Air Speed: 150km/hr
Max. Air Volume: 810m/hour
Weight: 2.5kg
PXCJBLS-018
WHAT’S IN THE BOX
Cordless Jet Blower
Blower Nozzle
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
ozito.com.au
0317
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
Battery & Charger sold
separately
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: blower tube.
Shoulder Strap
ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1. Slide the nozzle over the
blower outlet, aligning the
blower nozzle slot with the
tab on the outlet of the jet
blower.
2. Rotate the blower nozzle to lock
in place.
Fitting the Jet Blower Nozzle
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND BATTERIES DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
CORDLESS JET BLOWER
1 2 3 4
1. Blow Nozzle
2. Variable Speed Dial
3. Turbo Boost Button
4. ON/OFF Trigger
5. Handle
6. Battery Seating
WARNING! DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
ACCESSORIES
7. Shoulder Strap Fitting the Shoulder Strap
1. Ensure the shoulder strap is
clipped onto the top of the jet
blower.
2. To unclip the jet blower, press
either side of the buckle.
Note: To use the shoulder strap simply slide the strap over your shoulder so that some
of the weight of the jet blower can be taken by your shoulder.
5 6
7
2. BATTERY & CHARGING (SOLD SEPARATELY)
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
CAUTION: THE CHARGER FOR THIS PRODUCT
SHOULD BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
1. Connect the charger into a mains power outlet.
4. The charger LED will illuminate
red signifying that the battery is
charging.
3. With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5 . The charger LED will illuminate
green once the battery is fully
charged.
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging.
Low state of charge, requires charging soon.
Mid state of charge.
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1. Connect the charger into a mains power outlet.
4 The charger LED will illuminate red signifying that the battery is charging.
3 With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2. The charger LED will ash green
showing power is being supplied
to the charger.
5. When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Note: The battery will not develop a memory, it does not have to be fully discharged
before recharging.
Charging your lithium ion battery - Fast Charger
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ÂşC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH (Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
Product specificaties
| Merk: | Ozito |
| Categorie: | Bladblazers |
| Model: | PXCJBLS-018 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PXCJBLS-018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bladblazers Ozito
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Bladblazers
- Bladblazers Bosch
- Bladblazers Dolmar
- Bladblazers Eurom
- Bladblazers Florabest
- Bladblazers Grizzly
- Bladblazers Hikoki
- Bladblazers Hitachi
- Bladblazers Hyundai
- Bladblazers Makita
- Bladblazers Metabo
- Bladblazers Shindaiwa
- Bladblazers Skil
- Bladblazers Stihl
- Bladblazers Worx
- Bladblazers Black And Decker
- Bladblazers Ronix
- Bladblazers Yard Force
- Bladblazers Cramer
- Bladblazers Poulan
Nieuwste handleidingen voor Bladblazers
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022