Ozito PBSVS-270 Handleiding


Pagina's 2 Stofzuiger

Bekijk de handleiding van Ozito PBSVS-270 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

STANDARD EQUIPMENT
WARNING!Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related
hazards.
h)Do not let familiarity gained from frequent use of tools allow you to become complacent and
ignore tool safety principles. A careless action can cause severe injury within a fraction of a
second.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack, if detachable,
from the power tool before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling and control of the tool in unexpected
situations.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
e)Do not use a battery pack or tool that is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
g)Follow all charging instructions and do not charge the battery pack or tool outside the
temperature range specified in the instructions. Charging improperly or at temperatures
outside the specified range may damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by
the manufacturer or authorized service providers.
PBSVS-270
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Max Suction Capacity: 270mbar
Suction Volume: 16L/sec
Canister Capacity: 0.85L
POWER Settings: Eco / Normal / Boost
Weight: 2.5kg
ozito.com.au
0226
GENERAL POWER TOOL SAFETY WARNINGS
STICK VACUUM SAFETY WARNINGS
Brushless Stick Vacuum
Soft Roller Bar, Universal
Roller Bar, 2 x Screws, 2 x
Wall Plug, Cleaning Tool
DESCRIPTION OF SYMBOLS
Read instruction manual
Litre per second
l/sec
Volts
V
III
Regulatory Compliance Mark
(RCM)
Class III
Milibar
mbar
Power tools that are no longer usable should not be disposed of with household waste but in
an environmentally friendly way. Please recycle where facilities exist. Check with your local
council authority for recycling advice.
Recycling packaging reduces the need for landll and raw materials. Reuse of recycled
material decreases pollution in the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your local
Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
BRUSHLESS STICK
VACUUM
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO 25 Fox Drive, Dandenong South, VIC 3175, Australia.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
WARNING! BEFORE CLEANING OR CARRYING OUT
ANY MAINTENANCE PROCEDURE, ENSURE THAT
THE BATTERIES HAVE BEEN REMOVED.
Cleaning
• Keep the ventilation slots of the tool clean at all times to ensure efcient
operation.
• After each use, blow air through the tool housing to ensure it is free from
all dust, dirt, etc. Build up of dust or dirt particles may cause the tool to
overheat and shorten the life of the tool.
• If the housing of the tool requires cleaning, do not use solvents. Use of a
cloth only is recommended.
• Never allow any liquid to get inside the tool, never immerse any part of
the tool into liquid.
Cleaning the Dust Canister
1. Position the dust canister above a waste bin.
Press the release button (a) down to open the
canister bin ap (b).
2. Once it’s empty, click the canister bin flap back
shut until it snaps into place.
Cleaning the main filter
Never use the equipment without filters. Always make sure that the filters
are securely fitted. Clean the filters regularly to ensure optimum suction
performance.
1. Press the release button
2. Take out the dust canister.
3. The main filter can be found fitted inside the
equipment housing. It can be removed by
pulling on the tab. Gently tap on the filter or
clean it with compressed air at low pressure.
Cleaning the filter unit with metal mesh filter
1. The filter unit with metal mesh filter is fitted
inside the dust canister and can be removed
for cleaning when needed. Use a soft brush
or compressed air at low pressure to clean
the filter element.
2. Refit the filter to the dust canister, ensuring
the two tabs on the filter sit flush within the
notches.
HEPA filter: When the light comes on, please follow up the filter
clean process. If the issue persist, filter replacement
is required.
Brush roller: When the indicator is lit, it means the roller brush is
jammed. Please clean up brush roller with supplied
cleaning tool.
Warning light: Airway blocked. Please clear any obstructions and
clean the filter.
Cleaning the exhaust filter
The exhaust filter can be found inside the slotted vent cover.
1. To remove the exhaust filter, twist it to the
left (anticlockwise). Gently tap on the filter
or clean it with a dry brush.
2. To reinsert it, twist the exhaust filter
clockwise until it latches in place.
Cleaning or replacing the brush rollers
1. Slide the release button (a) sideways to
disengage the retaining latch and flip the
retaining latch upwards (b) to free the brush
drum.
2. Carefully take out the brush drum.
3. Remove any dirt, hair and fixbres with
the supplied cleaning tool from the brush.
Reinsert the brush drum and flip the retaining
latch back into place until you hear it click.
Note:Make sure that the brush roller latches in place correctly.
Cleaning the small motorized brush
1. Unscrew the cap with a flat screwdriver or
coin.
2. Lift the brush drum up and out, then use the
supplied cleaning tool to remove any hair, fibres and
dirt from the drum.
3. Reinsert the brush drum and secure it back into
position with a flat screwdriver or coin..
Storage
When not in use, the tool should be stored in a dry, frost free location, keep
out of children’s reach.
Note:Ozito Industries will not be responsible for any damage or injuries
caused by repair of the tool by an unauthorised person or by
mishandling.
ELECTRICAL SAFETY
WARNING! When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
• Read the whole manual carefully and make sure you know how to switch the tool off in an
emergency, before operating the tool. Save these instructions and other documents supplied
with this tool for future reference.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance.
• This appliance is compatible and only to be used with all batteries & chargers from the Ozito
PXC range. Refer to the PXC battery and charger manuals for information regarding charging,
use and storage.
• Always remove the battery from the tool: WARNING!
- when the batteries are to be charged,
- when the tool is left unattended,
- when the tool is being checked, cleaned, or having maintenance work done,
- when the tool is to be stored,
- or if the tool vibrates abnormally.
• Do not combine different types of batteries or new and used batteries.
• Do not use modified or damaged batteries.
When using the equipment, a few safety precautions must be observed to avoid injuries
and damage. Please read the complete operating manual with due care. Keep this
manual in a safe place so that the information is available at all times. If you give the
equipment to any other person, give them these operating instructions as well.
We cannot accept any liability for damage or accidents which arise due to a failure to follow these
instructions and the safety information.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure they do not play with the appliance.
•Do not leave appliance unattended when connected to the power supply. Remove battery
when not in use and before servicing and cleaning.
• To avoid electric shock, do not expose to rain. Store indoors.
• Never use in the presence of explosive liquids, vapours or explosive dust – such as coal or
grain.
• Use only manufacturer’s recommended attachments and consumables.
• Never modify the cleaner in any way - this is dangerous and will invalidate the warranty.
• Do not use cleaner without the filter in place.
• If motor sound becomes higher pitched always check for the following:
- Blocked hose or accessory.
- Blocked filter.
- Full dust canister.
• When lifting the unit, always lift it with the handle or under rim of bucket. Beware of excess
weight.
• Children should be supervised to ensure that they do not play with the appliance.
• The appliance is not suitable for the vacuuming of combustible, explosive or harmful
substances.
• Do not aim the hose at other persons or animals.
• Never pick up asbestos or asbestos dust.
• Wood dust and shavings in a confined area can give rise to fire or an explosion.
• Guard against possible ignition sources.
• Do not pick up any material that is burning or smouldering such as metal grinding dust,
cigarette ends, matches etc.
• Always switch the unit off before changing attachments, filters and emptying the tank.
• Always check that the filter is clear and not blocked. Keep all openings clear of any
blockages.
• The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the manufacturer will be liable for any damage
or injuries of any kind caused as a result of this.
• Do not vacuum dry matter without the filter assembled.
• Do not point LED at eyes of persons or animals.
MAINTENANCE
TROUBLESHOOT
a)
b)
a)
b)
HEPA
BRUSH
Wall Mount, Small
Motorised Brush, 2 in 1
Crevice Nozzle with Brush,
Flexible Crevice Nozzle
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
HEPA
BRUSH
1. Speed Selector Switch
2. Dust Canister Release Button
3. Dust Canister
4. Canister Empty Release Button
5. Head Release Button
6. Motorised Cleaning Head
7. LED Worklight
8. Rubber Wheels
9. Suction Tube
10. Suction Tube Release Button
11. Battery Seating
12. Sure Grip Handle
13. Control Panel
14. HEPA Filter Warning Light
15. Brush Roller Warning Light
16. Vacuum Mode Indicator
17. Battery Level Indicator
18. Airway Warning Light
19. Power On/Off Button
Fitting the Accessories
1. Fit the vacuum head into
the suction tube until it
latches in place with a
click.
2. Fit the motor brush into the
suction tube until it latches
in place with a click.
Note: The small motorized
brush, 2-in-1 Crevice
nozzle with brush and
exible crevice nozzle
can be attached
directly to the
vacuum head or to
the suction tube.
Installing The Battery Pack
1. Slide the battery into the
tool base until it clicks into
place.
Note: The battery percentage can also
be seen on the LED display once
the tool is switched on. The battery
indicator flashes when the battery
is running low.
Removing The Battery Pack
1. Hold down the battery
release button (a) and slide
the battery out (b).
On/Off Switch
1. Press the button to switch the tool on and press
it again to switch it off.
Modes
The vacuum has 3 Mode Settings:
ECO (GREEN):
Suitable for hard floors and low-pile carpets or
when a longer running time is desired.
NORMAL (TURQUOISE):
Balanced suction power for daily cleaning.
BOOST (BLUE):
Maximum suction power for high-pile carpets or
especially thorough cleaning.
Speed
The vacuum has 3 Speed Settings:
To choose a speed, move the switch to align with your desired speed
setting.
ECO: NORMAL: BOOST:
Suction Nozzles/ Brushes
Flexible Crevice Nozzle:
It is suitable for vacuuming corners, edges and other areas that are dicult
to access.
2-in1 Crevice Nozzle with Brush:
It combines a crevice nozzle and an adjustable brush. The brush can be
moved up and down along the nozzle.
To change positions, press
the release button at the top
of the nozzle (a) and slide the
brush into the desired position
until it latches into place.(b)
Motorized Cleaning Head:
It is ideal for thoroughly cleaning hard floors and carpets. The rotating brush
roll eectively removes dirt and adjusts to dierent floor surfaces.
Small-motorized brush:
It is perfect for picking up animal hair, fibres and ground-in dirt on
upholstered furniture, car seats and other textile surfaces. The rotating
brush drum ensures thorough cleaning on small surfaces.
Note: To achieve the best suction
performance, empty the dust
canister each time after you use
the cleaner or as soon as the dust
reaches the MAX line.
Fitting the Wall Mount
1. Align the wall mount to the
screws (2 wall plugs, and 2
screws included) and x it
to the wall.
Note: The holder provides a practical
means of storing the stick vacuum
after use.
Note:All accessories can be stored on the wall mount. The small
motorised head can be attached
down the bottom of wall mount.
and the two crevices can be stored
on the sides.
This tool is compatible with all batteries & chargers from
the Ozito PXC range.
For best performance, we recommend using a 3Ah PXC
battery or higher.
BRUSHLESS STICK VACUUM
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
3. CONTROLS4.USAGE2. ASSEMBLY
SETUP & PREPARATIONOPERATION
a)
b)
a)
b)
7
6
5
8
9
10
13
15
17
18
14
16
19
12
11
4
2
3
1
24
25
26
27
2820
21
22
23
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! NEVER USE THE EQUIPMENT WITHOUT
FILTERS ALWAYS MAKE SURE THAT THE FILTERS
ARE SECURELY SEATED!
WARNING! DO NOT PUT HAND OR FINGERS NEAR
MOTORIZED CLEANING HEAD WHILE VACUUM IS
RUNNING.
PBSVS-270
ACCESSORIES
CONTROL PANEL
WARNING! MAKE SURE THAT NOTHING IS JAMMED
BETWEEN THE EQUIPMENT CONNECTIONS.
20. Wall Mount
21. Small Motorised Brush
22. 2-in-1 Crevice Nozzle With Brush
23. Flexible Crevice Nozzle
24. Universal Roller Bar
25. Soft Roller Bar
26. Screws x 2
27. Wall Plug x 2
28. Cleaning Tool

Beoordeel deze handleiding


Product specificaties

Merk: Ozito
Categorie: Stofzuiger
Model: PBSVS-270

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PBSVS-270 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden