Ozito ODIC-4810 Handleiding

Ozito Fotocamera ODIC-4810

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ODIC-4810 (4 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

DIGITAL INSPECTION

CAMERA

Ø8MM X 1M

INSTRUCTION MANUAL

SPECIFICATIONS

Power: 4 x 1.5V AA Batteries

Camera Dimensions: Ø8mm x 1m

Camera Viewing Angle: 48°

Camera Effective Range: 10m

Camera Resolution: 640 x 480

Monitor: 2.3” TFT LCD Display

IP Rating (Camera Shaft): IP67

Weight: 0.965kg

ODIC-4810

STANDARD EQUIPMENT

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase. If a product is defective it will be replaced

in accordance with the terms of this warranty. Warranty excludes

consumable parts, for example: valve adapters and accessories.

WARNING! The following actions will result in the warranty

being void.

• If the tool has been operated on a supply voltage other than that

speciﬁed on the tool.

• If the tool shows signs of damage or defects caused by or

resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction

manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE

RELATING TO THE WARRANTY POLICY OR

PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

ozito.com.au

Handle with LCD Screen &

Flexible Shaft Camera

AV Cable, 2 x Accessory

Collars, Mirror Tool, Magnet

Tool, Hook Tool & Double

Hook Tool

Carry Case

1019

GENERAL POWER TOOL SAFETY WARNINGS

BATTERY & INSPECTION CAMERA WARNINGS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference. The

term “power tool” in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

b. Do not operate power tools in explosive atmospheres, such as

in the presence of ammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in

any way. Do not use any adapter plugs with earthed (grounded)

power tools. Unmodied plugs and matching outlets will reduce risk of

electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased risk

of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering

a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the risk

of electric shock.

e. When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use

reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in serious personal

injury.

b. Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the o-

position before connecting to power source and/or battery pack,

picking up or carrying the tool. Carrying power tools with your nger

on the switch or energising power tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool

may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

h. Do not let familiarity gained from frequent use of tools allow you

to become complacent and ignore tool safety principles. A careless

action can cause severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and o.

Any power tool that cannot be controlled with the switch is dangerous

and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to

operate the power tool. Power tools are dangerous in the hands of

untrained users.

e. Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may aect the

power tool’s operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance

with these instructions, taking into account the working conditions

and the work to be performed. Use of the power tool for operations

dierent from those intended could result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean and free from oil

and grease. Slippery handles and grasping surfaces do not allow for

safe handling and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualied repair person using

only identical replacement parts. This will ensure that the safety of

the power tool is maintained.

WARNING! The appliance is not to be used by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction.

Young children should be supervised to ensure that they do not play

with the appliance.

• Do not store or use the tool and battery pack in locations where the

temperature may reach or exceed 40

0C (such as inside sheds or

metal buildings in summer).

• Do not incinerate the battery pack even if it is seriously damaged or is

completely worn out. The battery can explode in a re.

• Remove the batteries before cleaning the unit.

• Remove the batteries if the unit will be stored for a long time.

• When necessary, replace all 4 batteries at the same time.

• Only use the size and type of battery specied.

• Ensure that the batteries are installed correctly; the polarity of

each battery should match the markings indicated in the battery

compartment.

• Do not attempt to recharge batteries.

Tool Specic Warnings

• Prevent object & liquid entry. Never spill liquid of any kind on the

video display unit. Liquid increases the risk of electrical shock and

damage to the product.

• The unit is not shock-resistant. Do not use the unit as a hammer and

avoid high impacts resulting from things such as dropping the unit

from a height.

• Do not immerse the handle or LCD display in water. Avoid moisture

and store the tool in a dry place to reduce the risk of electric shock

and damage. The camera and exible shaft are water resistant when

the unit is fully assembled; the handle and display portion of the unit

are not.

• Do not use the camera if condensation forms inside the lens. Let the

water evaporate before using it again.

• Switch o the unit when not in use.

• Keep away from children & animals. The accessories are sharp and

can be a choking hazard if swallowed.

• Store securely in carry case.

The beneﬁts provided under this warranty are in addition to other

rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You

are entitled to a replacement or refund for a major failure and for

compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the

goods fail to be of acceptable quality and the failure does not amount

to a major failure.

Generally you will be responsible for all costs associated with a claim

under this warranty, however, where you have suffered any additional

direct loss as a result of a defective product you may be able to claim

such expenses by contacting our customer service helpline above.

ONLINE MANUAL

Scan this QR Code with

your mobile device to take

you to the online manual.

Installing Batteries

The inspection camera requires 4 x 1.5V AA batteries to operate.

1. Press in the tab and lift o the

battery compartment lid.

2. Insert the batteries into the compartment.

Note: Refer to the batteries symbols in the compartment and check

that the batteries have been inserted in the correct orientation.

3. Replace the battery compartment lid.

Low Battery Indicator

When the battery icon shows the

low battery symbol, the batteries

are at low charge and need to

be replaced.

WARNING! REPLACE ALL 4 BATTERIES AT THE

SAME TIME.

1. Camera Lens

2. Camera Shaft Base

3. Threaded Collar

4. Power Indicator

5. LCD Display

6. Power Button

7. Handle Unit

8. Rotate Button

9. LED Brightness Button

10. Screen Contrast Button

11. Video Output Port

12. Flexible Camera Shaft

13. Accessory Collars

14. Mirror Tool

15. Magnet Tool

16. Single Hook

17. Double Hook

DIGITAL INSPECTION CAMERA

KNOW YOUR PRODUCT

1. BATTERIES

SETUP & PREPARATION

DIGIT AL INSPECT ION CAM ERA

13 17161514

Attaching The Camera Shaft

1. Align the key in the base of

the camera shaft with the slot

in the handle unit.

2. Push the two parts together

rmly.

3. Twist the threaded collar clockwise onto

the camera shaft base to lock it in place.

Extending The Display

The display unit can be plugged into a larger screen for easier

viewing when required.

1. Plug the black 3.5mm TS plug

of the AV cable into the video

output port.

2. Plug the yellow RCA plug of

the AV cable into the yellow

AV input on your desired

display unit.

3. Follow the display unit

manufacturer’s instructions for

viewing AV inputs.

Attaching Accessories

The supplied tools can be attached to the end of the camera shaft

and used to recover objects in narrow, inaccessible spaces.

The magnet tool can be used to pick up

ferrous objects such as nails and screws that

have fallen into crevices.

The mirror tool can be used to look around

bends and corners in tubes.

The shaft of the mirror tool can be adjusted if

there is some misalignment.

The single and double hooks can be used to

lift non-magnetic objects such as rings and

bolts.

1. To attach any of the

accessories, slide one of the

accessory collars around the

desired tool.

2. Insert the small hook into the

hole on the end of the camera

shaft.

2. Slide an accessory collar over the end

of the tool and camera shaft. Ensure

the tool is aligned with the channel in

the accessory collar.

3. Check that the accessory is installed correctly by tugging gently on

it.

4. To remove the accessory, slide o the collar and pull the hook out

of the hole in the camera shaft.

2. DISPLAY 3. ACCESSORIES

ODIC-4810

Product specificaties

Merk:	Ozito
Categorie:	Fotocamera
Model:	ODIC-4810

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ODIC-4810 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Fotocamera Ozito

Ozito ODIC-4810 Handleiding

18 Januari 2023

Handleiding Fotocamera

Nieuwste handleidingen voor Fotocamera

Camouflage EZ2 Handleiding

18 April 2024

Camouflage SM4-PRO Handleiding

18 April 2024

Bushnell Prime L20 Handleiding

13 April 2024

Samsung NX30 Handleiding

9 April 2024

Samsung ST65 Handleiding

8 April 2024

Denver WCT-8026W Handleiding

8 April 2024

Denver WCT-8016 Handleiding

8 April 2024

Ring Stick Up Cam Battery (3rd Generation) Handleiding

6 April 2024

Joy-it rb-camera-ww Handleiding

3 April 2024

Joy-it rb-camera_JT Handleiding

3 April 2024