Overtone Labs Tune-Bot Gig Handleiding
Overtone Labs
Niet gecategoriseerd
Tune-Bot Gig
Bekijk gratis de handleiding van Overtone Labs Tune-Bot Gig (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 86 mensen en kreeg gemiddeld 4.1 sterren uit 43.5 reviews. Heb je een vraag over Overtone Labs Tune-Bot Gig of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1

GLOSSARY
Lug pitch: Pitch obtained by striking the drum head near one of the
lugs. Lug pitch diers from lug to lug. Also, lug pitches of baer lugs
are unrelated to lug pitches of resonant lugs.
Fundamental pitch: The overall pitch of the drum. The dominant and
lowest pitch you hear when you hit the center of the drum head The .
fundamental pitch is the same for both the baer and resonant head.
Matching lugs: Trying to get the same or similar lug pitch at each lug.
MODES
Absolute mode: Shows the pitch in Hz as well as the nearest note
and octave. The dial shows the pitch error.
Dierence mode: Useful for matching lugs, it lets you choose one lug
pitch as a reference and compares other readings to that lug pitch.
The dierence between the new reading and the reference is
displayed as +/- , it also displays the reference pitch at the boom Hz
of the LCD and the frequency error on the dial Note: Dierence .
mode also filters around the reference pitch and rejects sounds more
than 20% high or lower in pitch. er
HOW TO USE
Install the baery. We have included two AAA baeries. Open the
baery cover by pushing down and sliding in the direcon of the
arrow on the cover. Install the baeries, making sure to match the
posive and negave ends of the baeries to the correct contacts.
Then replace the cover.
Place your drum on a stool or carpet as to mute the opposite head.
Then, clip the Tune-Bot gig to the drum hoop between any two lugs.
Push the small buon to turn the unit on.
Strike the head of your drum lightly about 1” inward of any lug and
wait for a reading on the display, this reading is your lug pitch.
Tightening a lug will raise the pitch while loosening the lug will lower
the pitch. Try to get nearly the same pitch at each lug. Measure each
of the lugs and make adjustments unl all lugs are within 2Hz of each
other. We have lug pitch suggesons, including Arst tunings, listed
on our website, , and on our free tuning www.tune-bot.com
calculator app which you can download at the Apple app store or
Google Play store.
You can also tune your drums using the difference mode. First, get a
lug pitch reading the same way as listed in the previous paragraph.
Next, press the Dierence buon. Now strike 1” inward of the
remaining lugs. You are aiming for a reading close to 0. If your
reading is posive, loosen the lug, if it is negave, tighten the lug.
Repeat for all lugs unl all readings are within +/- 2 Hz.
In order to read the fundamental pitch (overall pitch) of the drum,
you must allow both heads to resonate. With both heads unmuted,
strike the center of the drum head, the LCD will display the
fundamental pitch in both Hz and note. Make sure not to use
dierence mode when reading the fundamental pitch.
SPECIFICATIONS
Tuning Range: - 400 Hz, 1C - 30 4G#
Sine-Wave Resoluon: - 0.5 Hz. +/
Response Time: 750 mSec.
Power: 2 AAA Baeries
Weight: g. (without baeries) 72
PRECAUTIONS
1. Avoid the following situaons to prevent a potenal malfuncon
of the tuner: Exposure to liquids, Direct sunlight, Extreme
temperature or humidity, Excessive dust or dirt.
2. Remove the baeries to prevent leakage when the unit is not in
use for long periods.
3. To avoid breakage, do not apply excessive force to the push-
buons, baery cover, clamp or display. Do not take apart the tuner,
it is not user serviceable. Dismantling the tuner voids the
manufacturer's warranty.
4. Do not use liquid cleaners on the product.
REGULATIONS FCC (USA) :
This Class B digital device has been tested and found to comply with
Part 15 of the FCC Rules. These FCC limits provide reasonable
protecon against radiated interference in a residenal installaon.
REGULATIONS: CE Mark (European Harmonized Standards)
This baery operated apparatus has been tested and found to
comply with EMC Directive (89/336/EEC) and CE mark Direcve
(93/68/EEC).
Product specificaties
Merk: | Overtone Labs |
Categorie: | Niet gecategoriseerd |
Model: | Tune-Bot Gig |
Heb je hulp nodig?
Als je hulp nodig hebt met Overtone Labs Tune-Bot Gig stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Overtone Labs
28 Februari 2024
Handleiding Niet gecategoriseerd
- FBT
- Harder & Steenbeck
- Vestfrost
- Outwell
- Malmbergs
- Musser
- Osann
- Netter Vibration
- Newline
- Miniland
- Lively
- PeakTech
- APSystems
- Logitech
- Acoustic Solutions
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025