OSD Audio SC800D Handleiding
Pagina's 2 Engels Speaker
Bekijk de handleiding van OSD Audio SC800D gratis online of download de PDF. 23 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
1 2
SL800D SUBWOOFER INSTALL GUIDE
Cut and prepare a hole to install
the SL800D into a stud bay where
it can be securely mount to both
wall studs.
Once in place the SL800D should
be tested before securely mount-
ing and moving onto step 3.
Final step, install the magnetic
grille system by simply laying it
into place.
3
Preparation:
Tools For InstallationSpeaker Wire Guide
- Pencil
- Drill
- Tape Measure
- Wire Cutter
- Phillips Screwdriver
- Utility Knife
- Safety Eye Wear
- Gloves
- Sandpaper
18AWG minimum - for distances up to …………………. 10 ft
16AWG - from …………………………………..…... 10 to 50 ft
14AWG - from …………………………………...… 50 to 100 ft
Installation:
Cut Out
NOTE: This is the most important part of the entire installation.
If you are not certain whether any obstructions exist behind the
desired mounting area, you should start by cutting a small hole in
the center of your penciled mounting hole with a drywall saw.
Using the Cut Out dimensions measure and trace a template on the
wall in the desired location. Cut along the traced line using a drywall
saw or rotary drill. Use a piece of sandpaper to sand down the cut out
edge for a smoother contour. (See Diagram 1.)
Diagram 1
Product specificaties
| Merk: | OSD Audio |
| Categorie: | Speaker |
| Model: | SC800D |
Heb je hulp nodig?
Als je hulp nodig hebt met OSD Audio SC800D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker OSD Audio
OSD Audio IW850 Handleiding OSD Audio ICE660 Handleiding OSD Audio Forza-10 Handleiding OSD Audio AP840 Handleiding OSD Audio BTR-805 Handleiding OSD Audio IW520 Handleiding OSD Audio IW840 Handleiding OSD Audio ACE590 Handleiding
Alle OSD Audio Speaker handleidingen