OSD Audio PRE 1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor OSD Audio PRE 1 (4 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
PRE 1
STEREO PRE AMPLIFIER INSTALL GUIDE
POWER
MIC
MIC LEVEL BASS MID TREBLE LOUDNESS BALANCE
VOLUME
CD/DVD
MONOTAPE
LOW FILTER MUTE
AUX1 AUX2
PHONO
INPUT SELECT
Min Max Min Max Min Max Min Max Min Max
Min Max
Left Right
STEREO PRE-AMP
1PRE
STEREO PRE-AMP
CD/DVD AUX1 AUX2
STER EO PRE-AMP
1PRE
STER EO PRE-AMP
PRE 1 INSTALL GUIDE
Front Panel Description
Back Panel Description
1. Power ON / OFF
2. Microphone Jack Input
3. Mic Level Control
4. To boost or attenuate low frequency sound.Bass Control:
5. To boost or attenuate midrange frequency sound.Midrange Control:
6. Treble Control: To boost or attenuate high frequency sound.
7. To compensate for the non-linear response of the human ear at low volume.Loudness:
8. Controls the relative volume between the left/right speakers and headphone.Balance:
9. Master Volume: Adjusts the main output volume level of speakers and headphones.
10. Switch between multiple input sources.Input Selector:
11. Tape: Input for an analog tape deck
12. Switch between mono or stereo signalMono:
13. Eliminates low frequency distortion from a turntable or warped record.Low Frequency Filter:
14. Reduce the volume level by 20dB. Useful when changing records, tapes or changing sources.Mute:
1. Connect to Left/Right output from a turntable.Phono Inputs:
2. Auxiliary source input.Aux Input 2:
3. Auxiliary source input.Aux Input 1:
4. Connect to Left/Right output from a CD or DVD player.CD/DVD Input:
5. Tape Play: Connect to a tape decks output jacks.
6. Tape Rec: Connect to a tape decks input jacks.
7. Used to connect to a signal processing unit, such as a graphic equalizer or can be connected to a power Output:
amplier with higher output power.
8. Connect the ground wire from a turntable here to avoid hum or feedback from the speakers.Ground Screw:
9. Switch between 110V-220V AC.AC Selector:
10. Contains primary AC fuse If fuse blows replace only with the same amperage fuse.Fuse Holder:
11. Plug the AC cord into a nearby AC outlet or surge protector.AC Power Cord:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
9.8.7.6.5.4.3.2.1.
11.
14.
11.
12.
13.
10.
CD/DVD AUX1 AUX2
STER EO PRE-AMP
1PRE
STER EO PRE-AMP
System Diagram
PRE 1 INSTALL GUIDE
CD/DVD
AUX 2
AUX1
TAPE
PHONO
AMPLIFIER


Product specificaties

Merk: OSD Audio
Categorie: Hifi systeem
Model: PRE 1

Heb je hulp nodig?

Als je hulp nodig hebt met OSD Audio PRE 1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hifi systeem OSD Audio

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem