OSD Audio MVC-100 Handleiding

Bekijk gratis de handleiding van OSD Audio MVC-100 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 390 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over OSD Audio MVC-100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

New 70V Attenuators MV25,

MV50 & MV100

DECORA® Style 70V

Volume Controls/Attenuator

Basic Connecons:

1) All speaker connecons are in parallel whether the

speakers are “home run” individually back to the

amplier; or in a Daisy Chain conguraon Opon#1

from one speaker; to the next making sure Opon#2

they are connected in parallel.

Note: the3 MCV Aenuators feature a convenient

through-output to easily connect the speakers in Daisy

chain conguraon using the thru-put connecon (by

passing the Transformer) of each Volume Control you

use in the chain.

2) The Common and 70Volt outputs of the Amplier

connect to the Common and Input of each Aenuator

whether all are coming directly from the Amplier in

“Home Run” or from the Aenuator to the previous

Aenuator in the “Daisy Chain”

3) The Common and Output of each Aenuator

connects to the Common and desired color coded

waage wire on the Primary of the 70 Volt Transformer.

Or the Common and Output of each aenuator

connects to the negave (black) and Posive (red) for a

speaker with built in transformer. Then the waage is

set with the selector switch (as featured in the images

to the le)

4) The 8 ohm secondary (output) wires on the

transformer connect to the speaker terminals

(Black-/Red+).

5) Then connect the Line or Auxiliary output from your

main mixer to the Auxiliary input on the Distribuon

amplier.

Transformer

Oponal

Through

Output to

next

Aenuator

Input

from Amplier

Output

to Speakers

Features and Specicaons

DECORA style high-quality auto transformer provides advantages of excellent frequency response, low inseron loss

and reliable performance for volume control applicaons in 25 and 70 volt systems. Aenuaon is accomplished in ten

make before break steps plus posive o posion (no stop between maximum and o posion to prevent switch

damage). The Aenuator features removable input/output terminal blocks, Two in, two out and two oponal for

through output for daisy chain opon. An aracve alternave to Commercial series aenuators mounts into most

single gang E.O boxes. UL Listed White, Almond and Ivory Plasc Plates with Matching Skirted Knobs in DECORA® Style

Power Rangs: MV25: 25W,

MV:MV50 50W &100: 100W

Product specificaties