Oricom OS10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Oricom OS10 (1 pagina's) in de categorie Baby product. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
OS10
User Manual
Portable Sound Soother
Table 1: Product diagram of OS10 Portable Sound Soother
Safety Instructions
We recommend that the user manual is reviewed in full before
ïŹrst use.
Do not modify your portable sound soother.
Portable sound soother is not waterproof. Do not submerge
in water, or use in wet areas, e.g. bathrooms.
Install batteries
The OS10 Portable Sound Soother can be powered directly
with Alkaline batteries or via a power adaptor (not included)
using the supplied USB cable.
4. Turn on
Please press the to turn on the portable sound soother, the
power indicator light will illuminate.
3. Connecting power adaptor
Connect the supplied USB-C cable to the base of the portable
sound soother and a 5VDC 1A power adaptor (not supplied).
(not supplied)
5V ,1A
Power
Volume up
Volume down
Speaker
Indicator lights Timer
5. Sound selection
There are 20 soothing sounds:
1 Heartbeat, 1 White noise, 6 Lullabies,
12 Nature sounds.
Press the soothing sound button to
change the audio.
6. Volume adjustment
Press "+" and "-" to adjust
the volume.
(7 levels)
7. Timing function
Press the to choose between
15, 30, 60 minutes or continuous
play.
Quick Guide
1. Unscrew the back
cover with a suitable
screwdriver, then
2. Install Alkaline batteries.
Connect the 3×AAA,
1.5V alkaline batteries
(not supplied) in
accordance with the
correct positive and
negative polarity.
Reinstall cover and
tighten screw.
- AAA 1.5V +
- AAA 1.5V +
- AAA 1.5V +
SpeciïŹcation
Model
OS10
Dimensions
(L×W×H)
(87mm×77mm×38mm) ±0.2mm
Approx. (125 ± 2) g
DC 5V 1A or 3×AAA,
1.5V alkaline batteries;
(batteries not supplied)
Weight (including
batteries)
Power
Table 3: SpeciïŹcations of OS10 Portable Sound Soother
Volume 7 levels, the maximum volume is less
than 75dB
Low battery
display
(3.4±0.2) V. Power LED ïŹ‚ashes red
Temperature: +5℃ ℃ to +40 ;
Humidity: 15% to 93% RH
(non-condensing);
Air Pressure: 70Kpa-106Kpa
Temperature: -25 to +55℃ ℃;
Humidity: 15% to 93% RH
non-condensing;
Air Pressure: 70Kpa-106Kpa
Operating
Environment
Transport and
Storage
Environment
OS10Model
Portable
sound
soother
Accessories
1
2
3
4
5
6
7
8
10
9
11
Table 2: Product diagram description
No.
1
5
9
2
6
10
3
7
11
4
8
Description Description Description DescriptionNo. No. No.
Power
Volume up Volume
down
Speaker Indicator
lights
Lanyard
hole
USB-C
Power cord
Adjustable
Strap
Soothing
sounds
Heart rate
sound
Timer
Keep the device free of dust, vibrations, corrosive, or
ïŹ‚ammable materials, and away from extremes in
temperature and humidity.
Switch off the power before cleaning. Clean exterior surface
of device with a dry soft cloth.
Don’t operate under a blanket or pillow. Excessive heating
can occur.
Do not attempt to recharge normal dry-cell batteries, as they
may leak and cause a ïŹre, or even explode.
Only use the portable sound soother when battery cover is
closed.
Keep batteries away from children or pets.
Introduction
Description
The OS10 Portable Sound Soother helps your baby fall asleep
faster, by simulating the white noise of the natural
environment. Additionally, the OS10 simulates a mothers
heartbeat in order to create a relaxing, soothing environment
Product Features
20 soothing sounds: 1 Heartbeat, 1 White noise,
6 Lullabies, 12 Nature sounds.
Sleep Timer: 15, 30, 60 minutes or playing continuously.
Compact, portable design.
Suitable for all ages; Adults, children and infants.
How to Use Your Portable Sound Soother
Press and hold the power button. Press the “soothing
sounds button” to change the sounds. There are 20 soothing
sounds to choose from.
Press the volume up or volume down buttons to select the
preferred audio level.
To set a timer, press the timer button. Each time you press
the timer button, the duration will change between 15, 30,
60 minutes. The indicator light represents which timer
duration you have selected. The portable sound soother will
turn off automatically after the selected time.
The product should be placed at a distance of more than
1 metre from your child.
Troubleshooting
Problems ResolutionsPossible reason
Portable Sound
Soother won't
turn on
1. Batteries may be low
or ïŹ‚at.
2. Batteries might not
be installed
incorrectly.
3. Poor USB-C
connection.
1. Replace batteries.
2. Reinstall the
batteries.
3. ConïŹrm USB-C is
connected and
power is available.
This Express Warranty is provided by Oricom International Pty Ltd ABN
46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein
after referred to as “Oricom”.
Oricom warrants that the product is free from defects in materials or
workmanship during the Express Warranty Period. This Express Warranty
does not extend to any product from which the serial number has been
removed or was purchased outside of Australia.
The beneïŹts of this Express Warranty are in addition to other rights and
remedies you may have under the Australian Consumer Law. Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. In the
event of a minor failure, Oricom reserves the right to choose to repair or
replace the product.
The Express Warranty Period will be a period of 12 months beginning on the
date of purchase of the product evidenced by your dated sales receipt. You
are required to provide proof of purchase as a condition of receiving Express
Warranty services.
You are entitled to a replacement product or repair of the product at our
discretion according to the terms and conditions of this document if your
product is found to be faulty within the Express Warranty Period. This Express
Warranty extends to the original purchaser only and is not transferable.
Products distributed by Oricom are manufactured using new materials or new
and used materials equivalent to new in performance and reliability. Spare
parts may be new or equivalent to new. Spare parts are warranted to be free
from defects in material or workmanship for thirty (30) days or for the
remainder of the Express Warranty Period of the Oricom branded product in
which they are installed, whichever is longer. During the Express Warranty
Period, Oricom will where possible repair and if not replace the faulty product
or part thereof. All component parts removed under this Express Warranty
become the property of Oricom. In the unlikely event that your Oricom product
has a recurring failure, Oricom may always, subject to the Competition and
Consumer Act 2010, at its discretion, elect to provide you with a replacement
Express Warranty (Australia) product of its choosing that is at least equivalent to your product in
performance.
No change to the conditions of this Express Warranty is valid unless it is made
in writing and signed by an authorised representative of Oricom.
Oricom will not be liable under this Express Warranty, and to the extent
permitted by law will not be liable for any defect, loss, damage or injury arising
out of or in connection with a:
1. Failure by you to adhere to the warnings and follow the instructions set out
in this user guide for the proper installation and use of the product;
2. Willful misconduct or deliberate misuse by you of the product;
3. Any external cause beyond our control, including but not limited to power
failure, lightning or over voltage; or
4. ModiïŹcation to the product or services carried out on the product by anyone
other than Oricom or Oricom’s authorised service provider.
How to make a claim under your Express Warranty in Australia
Oricom has a simple warranty process for you to follow:
‱ Please call or email our Customer Support Team, 02 4574 8888 or
support@oricom.com.au.
‱ A Customer Support Team member will verify after troubleshooting with you
if your product qualiïŹes under warranty. If so, they will give you a Product
Return Authorisation number.
‱ We will then email a Return Authorisation form and a Repair Notice
(if necessary), together with instructions on how to return the product for
warranty service.
Please note that if a Customer Support Team member advises that your
product does not qualify for return, this warranty does not apply to your
product. Products that are authorised to be returned to Oricom in Australia
must include all of the following:
‱ A completed Return Authorisation form
‱ A copy of your Proof of Purchase (please keep your original copy)
‱ The faulty product, including all accessories.
Send the approved returns to:
Oricom International Pty Ltd
Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes expenses incurred by you in
returning any faulty product to us. You must arrange and pay any expenses
incurred (including postage, delivery, freight, transportation or insurance of
the product) to return the faulty product to us, however, we will arrange
delivery of the repaired or replaced faulty product to you.
Important Information - Repair Notice
Please be aware that the repair of your products may result in the loss of any
usergenerated data (such as stored telephone numbers, text messages and
contact information). Please ensure that you have made a copy of any data
saved on your product before sending for repair. Please also be aware that
products presented for repair may be replaced by refurbished products or
parts of the same type rather than being repaired.
ORICOM CUSTOMER SUPPORT
Oricom have a trained and dedicated team of Customer Support
Representatives, each with the knowledge and resources to assist in
answering your questions quickly and efïŹciently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss the range of Oricom
products, feel free to contact Oricom or visit our website for answers to
frequently asked questions.
(02) 4574 8888
Monday - Friday 8am – 6pm AEST
Email: support@oricom.com.au
www.oricom.com.au
Oricom Support - New Zealand
0800 674 266
Monday - Friday 11am - 7pm NZST
Email: support@oricom.co.nz
Unscrew the back cover with a suitable screwdriver.
Remove the back cover.
Install 3 x AA Alkaline batteries in accordance with the
correct positive and negative polarity.
Reinstall the back cover and the screw. Do not overtighten
or the thread may become damaged.
To use the OS10 with the supplied USB cable, connect the
USB cable to the connector on the portable sound soother
and plug into a DC 5V 1A power adaptor (not included).
WARNING: Keep out of the reach of children. This
product is not a toy.
for your child.
Green colour indicator will
highlight the selected interval.
remove.


Product specificaties

Merk: Oricom
Categorie: Baby product
Model: OS10

Heb je hulp nodig?

Als je hulp nodig hebt met Oricom OS10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Baby product Oricom

Handleiding Baby product

Nieuwste handleidingen voor Baby product