Oricom MFMB01 Handleiding

Bekijk gratis de handleiding van Oricom MFMB01 (10 pagina’s), behorend tot de categorie Marifoon. Deze gids werd als nuttig beoordeeld door 57 mensen en kreeg gemiddeld 4.1 sterren uit 5 reviews. Heb je een vraag over Oricom MFMB01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ORICOM CUSTOMER SUPPORT

Oricom have a trained and dedicated team of Customer Support

Representatives, each with the knowledge and resources to assist in

answering your questions quickly and efficiently.

Oricom Support - Australia

For all product enquiries, troubleshooting or to discuss the range of Oricom

products, feel free to contact Oricom or visit our website for answers to

frequently asked questions.

02 4574 8888

Monday - Friday 8am – 6pm AEST

Email: supp[email protected]

www.oricom.com.au

Oricom Support - New Zealand

0800 674 266

Monday - Friday 10am - 8pm NZST

Email: supp[email protected]

MARINE RADIO CUTTING TEMPLATES

Scan the QR code below for the cutting template designed to suit each of

the Oricom MX1000 and MX1100G VHF marine radios.

USER GUIDE - ORICOM MFMB01 BRACKET

Installation of Flush Mount Bracket

1) Cut a hole into the location of where the radio is to be flush mount installed,

using the template downloadable on the supplied QR codes.

2) Slide the transceiver through the cutout, as the drawing shows below.

3) On the rear side with access to the back of the transceiver, affix the MFMB01

brackets to the left and right side of the transceiver with the supplied Philips

head screws, in the direction the image below shows.

4) Once secured to the transceiver, tighten the cap screws until firmly flush

mounted. Securely tighten with Hex key (not supplied).

5) Tighten locking nut to secure.

Images are for illustration purposes only.

MX1000 MX1100G

Note: Cap

screw should

be at the rear

of the radio.

Product specificaties