Oricom BSM888 Handleiding

Bekijk gratis de handleiding van Oricom BSM888 (4 pagina’s), behorend tot de categorie Radio. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.7 sterren uit 8 reviews. Heb je een vraag over Oricom BSM888 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTION MANUAL

Battery Sense Monitor Model: BSM888

INTRODUCTION

This product is used to monitor the health of your vehicle's battery, check vehicle cranking

system automatically while engine is starting and check battery charging system (alternator).

Your driving log can be tracked which includes driving time and duration.

Connect Battery Monitor to the battery and download the App. Using Bluetooth

communication, you can now monitor your battery via your smartphone. The Battery

Monitor will send you a notification when you approach your vehicle. It will help to

prevent vehicle breakdowns and maximise the performance of your battery by giving you

valuable information about the state of your battery. This product is designed to be used

on standard flooded type lead acid batteries. It may give incorrect information on other

types of battery. Voltage measurement will always be correct on any battery.

FEATURES

• Notification of battery conditions when approaching vehicle.

• Automatic synchronization when driver is within bluetooth range.

• Test cranking automatically once the engine starts.

• Can test charging system (alternator) manually.

• Automatically records the time and duration of each drive.

• Alerts are pushed to your smartphone whenever abnormal data is detected.

• Short-circuit and reverse polarity protection.

• Data stored in device monitoring up to 35 days if out of sync.

• Compatible with all 12-volt vehicle batteries.

• Review historical data intuitively.

• Free app for both iOS & Android.

• App supports up to 4 devices simultaneously.

SPECIFICATIONS

• Working Voltage: 6-20V

• Working Current: <2.5mA

• Case Material: Plastic

• Working Temperature: -40°C ~ 85°C

• Case Size: 46x31x8.7mm

• Weight: 19g

INSTALLATION

1. Connect the Battery Monitor to a battery

Connect positive terminal to positive

pole, negative terminal to negative pole

or to a suitable vehicle earth point.

Attach the product to the battery with

the tape provided. Clean the area first

and make sure it in a position that the

signal is not blocked.

Warning: Make sure if using metal tool

not to short the battery terminals or

touch the vehicle chassis while fixing

the terminals.

2. Download the App

APP OPERATION

1. Turn on bluetooth, click app icon. Add device.

This app supports up to 4 devices.

You can monitor 4 batteries simultaneously.

Scan the QR code on the left to download

the Battery Sense Monitor App.

Battery Monitor

Battery Monitor App is available in App Store or Google Play.

Please allow app to access location even when app not in use.

If access is not given, the product will not automatically notify you

when monitoring the battery (within bluetooth range).

Turn notifications on to receive information on the vehicle’s battery,

cranking system, and fault alerts. Notifications are received when

mobile phone is within bluetooth range. If notifications are turned off

you will not receive this information.

WARNINg

Be careful not to disconnect the battery

from the vehicle while installing this

product as you may lose some or all of

your vehicle security settings.

Product specificaties