Opus AutoLAM A3 Handleiding
Opus
Niet gecategoriseerd
AutoLAM A3
Bekijk gratis de handleiding van Opus AutoLAM A3 (19 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.4 sterren uit 5.5 reviews. Heb je een vraag over Opus AutoLAM A3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/19
OPUS AutoLAM A3 • User guide
EN
OPUS AutoLAM A3
User guide
EN
1 HEALTH & SAFETY PRECAUTIONS
• Before operating the equipment please read the Health & Safety precautions,
manufacturer recommendations and the operating manual.
• The equipment must be operated according to general Health & Safety rules.
• The operating manual should be easily available at any time for the operator.
• The equipment: should be installed on a sturdy level surface near a mains socket.
• = should be protected against dust and moisture.
• = must not be placed near a heating or ventilation units.
• = must not be used in vicinity of inflammable liquids or
gases.
• = power cable should be protected against damage and
not be used to move the equipment or pull the plug
from the socket.
• = must be kept away and out of the reach of children and
animals.
• = must not be used for any other purposes than those indi
cated in the instruction manual.
• = must not be located outside and operated in room tem
peratures lower 8 °C.
• Danger! The equipment contains rotary elements. Ensure long hair, loose jewel-
lery, ties and other loose clothing are keep away they can be get entangled in
the rolls.
• It is necessary to check and supervise if the equipment is operated correctly.
• In case of any malfunctions, you must contact the dealer or service team.
• Before removing any covers from the equipment, remove the power plug from
a mains socket.
• Using inappropriate lubricants causes a fire hazard.
• Any repairs must be carried out only by authorized sta during the guarantee
period.
• Do not leave the equipment unattended while in operation.
• After operating wait for the cooling down procedure has finished, turn o the
equipment by power switch on the unit. Then remove the power plug from a
socket.
2
2 MANUFACTURER’S RECOMMENDATIONS
• Use only recommended supplies and accessories.
• Do not put documents thicker than 0.6 mm into the laminator.
• Remove the power plug from the socket before moving the equipment or when not in use
for long periods.
• If the equipment is switched on and not operated for long periods, it can become over-
heated.
• To avoid bad quality lamination put 2 or 3 sheet of A4 paper through in order to cool the
rollers down.
OPUS AutoLAM A3 • User guide
EN
UNIT DECRIPTION
1. Auto/Manual Mode Button.
2. Pouch Selection Button.
3. Auto mode Indicator.
4. Exit Tray.
5. Cold Lamination Indicator.
6. Pouch Indicator, 75 – 250 μm/micron.
7. Reverse Button.
8. On/O Switch.
9. Pouch /Document Entry Slot.
3
• Always insert the laminating pouch, with the close end first.
• Putting the open end first can cause bubbling and the films to be stuck or rapped round
the rollers inside.
• Should a document get stuck inside the laminator use the reverse function (REV) switch
to eject the document.
• Tailor cut pouches can make the rollers sticky, dirty and rapped round them, use a carrier.
• Remove all metal elements (staples & paper clips, etc.) before laminating the documents.
• WARNING! The equipment contains heating elements, be aware high temperatures!
• Use a laminating pouch recommended for the size of the document.
• Insert the document into the centre of the pouch and the laminating slot.
• Do not laminate pouches without a document inside.
• Laminated documents should be cut after they have cool down.
• Self-adhesive pouch should only be laminated in the cold mode.
• Temperature sensitive documents should not be laminated in hot the lamination mode.
• Before laminating important document make a test on a similar document.
• NOTE! Not compliance with the rules and recommendations above can void the Gua-
rantee/Warranty.
D I
F
C
8
1
2
3
5
6
7
4
9
Product specificaties
| Merk: | Opus |
| Categorie: | Niet gecategoriseerd |
| Model: | AutoLAM A3 |
Heb je hulp nodig?
Als je hulp nodig hebt met Opus AutoLAM A3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Opus
19 Maart 2025
19 Maart 2025
19 Maart 2025
19 Maart 2025
Handleiding Niet gecategoriseerd
- Decimator
- Petri
- Abus
- EXSHOW
- IStarUSA
- Rinnai
- Atmel
- Inverto
- Flover
- Ag Neovo
- Massive
- Memphis
- Ergotec
- ZWO
- LifeStraw
Nieuwste handleidingen voor Niet gecategoriseerd
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025