Optoma PICO PK201 Handleiding

Optoma Beamer PICO PK201

Lees hieronder de 📖 handleiding in het Nederlandse voor Optoma PICO PK201 (19 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19

UNIVERSAL I/O

1. Do not block any ventilation openings.

To ensure reliable operation of the

projector and to protect from over

heating, it is recommended to install

the projector in a location that does not

block ventilation. As an example, do not

place the projector on a crowded coffee

table, sofa, bed, etc. Do not put the

projector in an enclosure such as a book

case or a cabinet that restricts air ow.

2. Do not use the projector near water or

moisture. To reduce the risk of re and/

or electric shock, do not expose the

projector to rain or moisture.

3. Do not install near heat sources such as

radiators, heaters, stoves or any other

apparatus such as ampliers that emits

heat.

4. Do not use the projector in direct

sunlight.

5. Do not use near any appliance

generating a strong magnetic eld.

6. Do not use the projector in areas

susceptible to excessive dust and dirt.

7. Turn off the product before cleaning.

8. Turn off the product before removing

the battery.

9. Disconnect the battery if the product is

not being used for a long period of time.

10. Ensure that the ambient room

temperature is within 5- 35°C.

11. Relative Humidity is 5 - 35°C, 80%

(Max.), non-condensing.

12. Do not expose the battery to

temperatures above +60°C (+140°F)

13. New or idle batteries can have short-

term reduced capacity. Fully charge the

battery before initial use.

14. Do not put the battery into your mouth.

15. Do not let the battery contacts touch

another metal object.

16. Do not drop, throw or try to bend your

product.

17. May explode if disposed of in re.

18. Clean only with dry cloth.

19. Only use attachments/accessories

specied by the manufacturer.

20. Do not use the unit if it has been

physically damaged or abused. Physical

damage/abuse would be (but not

limited to):

▀■ Unit has been dropped.

▀■ Charger or plug has been damaged.

▀■ Liquid has been spilled on to the

projector.

▀■ Projector has been exposed to rain or

moisture.

▀■ Something has fallen in the projector

or something is loose inside.

Do not attempt to service the unit

yourself. Opening or removing covers

may expose you to dangerous voltages

or other hazards. Please contact your

local reseller or service center before you

send the unit for repair.

21. Do not let objects or liquids enter the

projector. They may touch dangerous

voltage points and short out parts that

could result in re or electric shock.

22. See projector enclosure for safety related

markings.

23. The unit should only be repaired by

appropriate service personnel.

24. Do not touch the projector for a long

time while the projector is used.

25. CAUTION: Risk of Explosion if Battery

is replaced by an Incorrect Type.

26. Dispose of Used Batteries According to

the Instructions.

I S Important afety nStructIon

e S Wye afety arnIngS

Avoid staring/facing directly into

the projector beam at all times.

Keep your back to the beam as

much as possible.

A stick or laser pointer is

recommended to avoid the need

for the user to enter the beam.

When projector is used in a

classroom, adequately supervise

students when they are asked to

point out something on the screen.

In order to minimize power, use

room blinds to reduce ambient

light levels.

CLASS 1 LED PRODUCT

This appendix lists the general notices of

your Projector.

FCC notice

This device has been tested and found to

comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC

rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This device generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instruc-

tions, may cause harmful interference to

radio communications.

However, there is no guarantee that inter-

ference will not occur in a particular instal-

lation. If this device does cause harmful

interference to radio or television reception,

which can be determined by turning the

device off and on, the user is encouraged

to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

device and receiver.

• Connect the device into an outlet on

a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced

radio/television technician for help.

Notice: Shielded cables

All connections to other computing

devices must be made using shielded

cables to maintain compliance with

FCC regulations.

Caution

Changes or modications not

expressly approved by the manufac-

turer could void the user’s authority,

which is granted by the Federal

Communications Commission, to

operate this device.

Operation conditions

This device complies with Part 15 of the

FCC Rules. Operation is subject to the fol-

lowing two conditions:

1. this device may not cause harmful

interference, and

2. this device must accept any interfer-

ence received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian

ICES-003.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numerique de la classe B est conforme a la

norme NMB-003 du Canada.

Declaration of Conformity for EU countries

• EMC Directive 2004/108/EC (including

amendments)

• Low Voltage Directive 2006/95/EC

• R & TTE Directive 1999/5/EC (if product has

RF function)

r & egulatIon Safety notIceS D ISpoSal of olD

e & lectrIcal

e electronIc quIpment

(Applicable throughout the European

Union and other European countries

with separate collection programs)

This symbol found on your product or on

its packaging, indicates that this product

should not be treated as household waste

when you wish to dispose of it. Instead,

it should be handed over to an applicable

collection point for the recycling of electri-

cal and electronic equipment. By ensuring

this product is disposed of correctly, you

will help prevent potential negative con-

sequences to the environment and human

health, which could otherwise be caused by

inappropriate disposal of this product. The

recycling of materials will help to conserve

natural resources.

This symbol is only

valid in the European

Union.

If you wish to discard

this product, please

contact your local

authorities or dealer

and ask for the correct

method of disposal.

p oroDuct vervIeW

p oackage vervIeW

micro SD

RESET

DC IN

I BnStall the attery

micro SD

mic SDro

mic ro S D

UNIVERSAL I/O

RESET

DC IN

1. Focus Dial

2. Speaker

3. Audio Out Connector

4. AV Input Connector

5. VGA Input Connector

6. Lens

7. Up Button ( )

8. OK Button ( )

9. Left Button ( )

10. Cancel / ESC Button ( )

11. Right Button ( )

12. Down Button ( )

13. Power / Home Button ( )

14. Reset Button

15. Micro USB port

16. DC Input

17. Air vent

18. MicroSD card Slot

19. Screw Hole for Tripod Converter

20. Battery Cover

p oroDuct vervIeW

p oackage vervIeW

1. Remove the battery cover. (~)

2. Align the battery contacts with

the contacts in the battery

compartment. ()

3. Completely insert the battery with

the battery pull tab extending

underneath. ()

4. Slide the battery cover back into

place with the battery pull tab

inserted inside. (~)

micro SD

RES ET

DC IN

micro SD

RES E T

DC IN

<Note>

The standard accessories may vary in

each region due to different applications.

Standard Accessory

1. Power adaptor with AC Plug

2. VGA Cable

3. USB Male Cable

4. Battery

5. AV Cable

6. Carrying Case

7. Warranty Card and Quick Guide

8. Extra Bezel

Optional Accessory

9. iPod Connection Kit

USB cable for iPod Connector

iPod Cable

c. iPod Connector

<Note>

The inclusive power plug head varies per

region.

<Note>

Items 7~12 are also function buttons.

Functions vary depending on the current

mode.

Product specificaties

Merk:	Optoma
Categorie:	Beamer
Model:	PICO PK201
Gewicht:	160 g
Geluidsniveau:	0 dB
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Geïntegreerde geheugenkaartlezer:	Ja
Typische contrastverhouding:	2000:1
Projector helderheid:	- ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	WVGA (854x480)
Geschikt voor schermmaten:	5 - 70 "
Projectie-afstand objectief:	0.24 - 3.24 m
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
S-Video ingang:	1
DVI-poort:	Nee
Brandpuntbereik:	- mm
Levensduur van de lichtbron:	20000 uur
Type lichtbron:	LED
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	0.5 W
Aantal ingebouwde luidsprekers:	1
Stroomverbruik (in standby):	- W
Levensduur accu/batterij:	1.5 uur
Geïntegreerde TV Tuner:	Nee
Plug and play:	Ja
Afmetingen (B x D x H):	61 x 118 x 17 mm
Afstandsbediening inbegrepen:	Nee
Wifi:	Nee
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 80 procent