Optoma ML300 Handleiding

Optoma Beamer ML300

Lees hieronder de 📖 handleiding in het Nederlandse voor Optoma ML300 (28 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28

mini HDMI

micro USB

M leD Pobile rojector

U ’ Mser s anUal

1. Do not block any ventilation openings.

To ensure reliable operation of the

projector and to protect from over

heating, it is recommended to install

the projector in a location that does not

block ventilation. As an example, do not

place the projector on a crowded coffee

table, sofa, bed, etc. Do not put the

projector in an enclosure such as a book

case or a cabinet that restricts air ow.

2. Do not use the projector near water or

moisture. To reduce the risk of re and/

or electric shock, do not expose the

projector to rain or moisture.

3. Do not install near heat sources such as

radiators, heaters, stoves or any other

apparatus such as ampliers that emits

heat.

4. Do not use the projector in direct

sunlight.

5. Do not use near any appliance

generating a strong magnetic eld.

6. Do not use the projector in areas

susceptible to excessive dust and dirt.

7. Turn off the product before cleaning.

8. Turn off the product before removing

the battery.

9. Disconnect the battery if the product is

not being used for a long period of time.

10. Ensure that the ambient room

temperature is within 5- 35°C.

11. Relative Humidity is 5 - 35°C, 80%

(Max.), non-condensing.

12. Do not expose the battery to

temperatures above +60°C (+140°F)

13. New or idle batteries can have short-

term reduced capacity. Fully charge the

battery before initial use.

14. Do not put the battery into your mouth.

15. Do not let the battery contacts touch

another metal object.

16. Do not drop, throw or try to bend your

product.

17. May explode if disposed of in re.

18. Clean only with dry cloth.

19. Only use attachments/accessories

specied by the manufacturer.

20. Do not use the unit if it has been

physically damaged or abused. Physical

damage/abuse would be (but not

limited to):

▀■ Unit has been dropped.

▀■ Charger or plug has been damaged.

▀■ Liquid has been spilled on to the

projector.

▀■ Projector has been exposed to rain or

moisture.

▀■ Something has fallen in the projector

or something is loose inside.

Do not attempt to service the unit

yourself. Opening or removing covers

may expose you to dangerous voltages

or other hazards. Please contact your

local reseller or service center before you

send the unit for repair.

21. Do not let objects or liquids enter the

projector. They may touch dangerous

voltage points and short out parts that

could result in re or electric shock.

22. See projector enclosure for safety related

markings.

23. The unit should only be repaired by

appropriate service personnel.

24. Do not touch the projector for a long

time while the projector is used.

25. CAUTION: Risk of Explosion if Battery

is replaced by an Incorrect Type.

26. Dispose of Used Batteries According to

the Instructions.

I S Important afety nStructIon

e S Wye afety arnIngS

Avoid staring/facing directly into the projector beam at all times. Keep your back

to the beam as much as possible.

A stick or laser pointer is recommended to avoid the need for the user to enter

the beam.

When projector is used in a classroom, adequately supervise students when they

are asked to point out something on the screen.

In order to minimize power, use room blinds to reduce ambient light levels.

CLASS 1 LED PRODUCT

This appendix lists the general notices of

your Projector.

FCC notice

This device has been tested and found to

comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC

rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This device generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instruc-

tions, may cause harmful interference to

radio communications.

However, there is no guarantee that inter-

ference will not occur in a particular instal-

lation. If this device does cause harmful

interference to radio or television reception,

which can be determined by turning the

device off and on, the user is encouraged

to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

device and receiver.

• Connect the device into an outlet on

a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced

radio/television technician for help.

Notice: Shielded cables

All connections to other computing

devices must be made using shielded

cables to maintain compliance with

FCC regulations.

Caution

Changes or modications not

expressly approved by the manufac-

turer could void the user’s authority,

which is granted by the Federal

Communications Commission, to

operate this device.

Operation conditions

This device complies with Part 15 of the

FCC Rules. Operation is subject to the fol-

lowing two conditions:

1. this device may not cause harmful

interference, and

2. this device must accept any interfer-

ence received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian

ICES-003.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numerique de la classe B est conforme a la

norme NMB-003 du Canada.

Declaration of Conformity for EU countries

• EMC Directive 2004/108/EC (including

amendments)

• Low Voltage Directive 2006/95/EC

• R & TTE Directive 1999/5/EC (if product has

RF function)

r & egulatIon Safety notIceS D e & e ISpoSal of olD lectrIcal lectronIc

equIpment

(Applicable throughout the European Union and other European countries with

separate collection programs)

This symbol found on your product or on its packaging, indicates that this product should

not be treated as household waste when you wish to dispose of it. Instead, it should be

handed over to an applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help prevent

potential negative consequences to the environment and human health, which could

otherwise be caused by inappropriate disposal of this product. The recycling of materials

will help to conserve natural resources.

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or

dealer and ask for the correct method of disposal.

The requirements for the gloss of housing apply to peripheral devices used

at the visual display workplace according to BildscharbV. Peripheral devices

intended for use outside the visual display workplace can receive a GS-Mark

if the scope is indicated in the User’s Manual as well as the certicate.

That means the following wording is possible in situations where the use

within the eld of view is not intended and where sufcient hints are given

in the User’s Manual for the avoidance of such situations to ensure that

display work is not affected.

Wording in the certicate: “This device is not intended for use in the direct

eld of view at visual display workplaces. To avoid incommoding reexions

at visual display workplaces this device must not be placed in the direct

eld of view.”

a.2.9.31 g loSS of houSIng of perIpheral

DevIceS (15th / 22 ag1 eK1):meetIng

p oroDuct vervIeWp oroDuct vervIeW

1. VGA Connector

2. Mini HDMI Connector

3. AV Input Connector

4. Micro USB Port

5. OK Button ( )

6. Up Button ( )

7. Cancel / ESC Button ( )

8. Right Button ( )

9. Left Button ( )

10. Down Button ( )

11. LED Indicator

12. Home Button ( )

<Note>

Items 5~10 and 12 are also function buttons. Functions vary depending on the current mode.

13. IR Receiver

14. Speaker

15. Elevator Foot

16. Lens

17. Focus Dial

18.Power Button ( )

19. MicroSD Card Slot

20. Audio Out Connector

21. DC Input

22. USB Type A Port

23. Screw Hole for Tripod

PICTURE BY

DC in

micro SD

VGA

mini HDMI mic ro US BAV in

VGA

mini HDMI mic ro US BAV in

910 11

21 2220

12 13

18 19

16156 7 23

5 178

Power Z oom Hide

WiFi

display

USB

display

VideoHDMIVGA

Volume

Remote Control

1. Zoom

(for external input only)

2. Power

3. Up/Volume Up

4. OK

5. Left

6. Down/Volume Down

7. Home

8. WiFi Display

9. USB Display

10. VGA

11. Video Mute

12. Cancel / ESC

13. Right

14. LED Mode

15. Video

16. HDMI

p o / ooWer n ff

PICTURE BY

micro SD

DC in

mini HDMI

micro USB

AV in

1. Connect the power adapter to the

DC IN input jack on the rear of the

projector. ()

2. Insert one end of the AC power cord

into the power adapter. ()

3. Insert the other end of the AC

power cord into a power outlet. ()

The LED indicator blinks red in

standby mode.

4. Press the Power button ( ) to turn

the projector on or off. (m)

The LED indicator turns off when

the projector is turned on.

For rst time use, the Language

screen appears.

1. Highlight the desired language.

( )

2. Select the item. ( )

PICTURE BY

micro SD

DC in

mi ni H DM I

mi cro U SB

AV i n

Standard Accessory

1. AC Power cord

2. Power adapter

3. Micro-USB to

USB Type-A cable

4. Remote control

with battery

<Note>

The standard accessories may vary in each region due to different applications.•

The included power cord varies by region.•

p oacKage vervIeWp oacKage vervIeW

Power Z oom Hide

WiFi

dis play USB

dis play

VideoHDMIVGA

Volume

5. AV cable

6. VGA cable

7. Carrying case

Optional Accessory

8. Mini HDMI cable

9. WiFi dongle

<Note>

When the projector is in playback mode, pressing

items 8 or 9 will bring up the Home menu.

Product specificaties

Merk:	Optoma
Categorie:	Beamer
Model:	ML300
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	635 g
Breedte:	184 mm
Diepte:	105 mm
Hoogte:	44 mm
Geluidsniveau:	29 dB
Gebruikershandleiding:	Ja
Aantal lampen:	1 lampen
Stroombron:	AC
LED-indicatoren:	Ja
Plaatsing:	Desktop
USB-connectortype:	USB Type-A
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Meegeleverde kabels:	AC, USB, VGA
Geïntegreerde geheugenkaartlezer:	Ja
Typische contrastverhouding:	3000:1
Snelstartgids:	Ja
Markt positionering:	Thuisbioscoop
Projector helderheid:	300 ANSI lumens
Projectietechnologie:	DLP
Projector native resolution:	WXGA (1280x800)
Keystone correctie, verticaal:	± 30 °
Geschikt voor schermmaten:	17 - 160 "
Projectie-afstand objectief:	0.55 - 3.23 m
Aantal kleuren:	16.78 miljoen kleuren
Frequentiebereik verticaal:	50 - 120 Hz
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
DVI-poort:	Nee
Focus:	Auto
Brandpuntbereik:	- mm
Levensduur van de lichtbron:	20000 uur
Ingebouwde luidsprekers:	Ja
Gemiddeld vermogen:	2 W
Aantal ingebouwde luidsprekers:	1
Stroomverbruik (in standby):	1 W
Throw ratio:	1.5 - 1.8:1
Formaat analoog signaal:	NTSC, PAL, SECAM
Volledige HD:	Nee
HDCP:	Nee
Ingang stroom:	Ja
3D:	Ja
Beeldverhouding:	16:10
Audio (L,R) out:	1
Opbergetui:	Ja
Power LED:	Ja
Eenvormigheid:	80 procent
Afstandsbediening inbegrepen:	Ja
Wifi:	Nee
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	93 W
Bedrijfstemperatuur (T-T):	5 - 35 °C
Batterijen inbegrepen:	Ja
Type product:	Projector met normale projectieafstand
3D Ready:	Ja