Opticis HDFC-100-10 Handleiding

Opticis Kabels voor pc's en randapparatuur HDFC-100-10

Lees hieronder de 📖 handleiding in het Nederlandse voor Opticis HDFC-100-10 (5 pagina's) in de categorie Kabels voor pc's en randapparatuur. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

User’s Manual

HDFC-100

Doc No. : O -H1 - / Rev1.1 EC 61012 M1

Stretch HDMITM

Manual Contents

______________________________________________________

Manual Contents 1-0

Welcome!, Product Description 1-1

System Requirements for Setup 1-2

Installation 1-3

Troubleshooting, Maintenance, Technical Support 1-4

Product Speciﬁcations 1-5

Warranty Information 1-6

Pictorials

Figure 1 General connection diagram of HDFC- 1-1 –100

1- 0 Manual Contents

Welcome!

Congratulations on your purchase of the Stretch HDMITM HDFC-100, Active

Optical Cable for HDMI. This manual contains information that will assist you

in installing and operating the product.

Product Description

Shipping Group

 HDFC-100, Active Optical Cable: One (1) unit, length as your

inquire.

 User s Manual ’

Figure 1 General connection diagram of HDFC- –100

1-1 Welcome, Product Description

System Requirements for Setup

 Hardware requirements

 You have to have a HDMI multimedia systems (DVD, AV

Receiver, STB etc.) or graphic cards. It should support the

maximum graphic resolution feature of TVs to be connected.

 No special requirements memory size, CPU speed and

chipsets, if you ve already properly installed your HDMI ’

systems.

 Software requirements

 No special restrictions, if you ve already properly installed your ’

HDMI / DVI systems.

 AC/DC Power Adapter Technical Advisory

The HDFC-1 designed to use +5V internal power supplied 00 is

through a HDMI pin (#18) from the graphic source port To plug the .

Tx module into HDMI source makes the Rx module supplied over a

copper wire of the hybrid cable.

1-2 System Requirements for Setup

Installation

Important: Please use the installation procedure below. Improper or no

operation may result if the start-up sequence is not correctly followed.

Step 1

Carefully unpack the contents of the shipping group.

Step 2

Plug directly the HDMI plug of the side of HDFC-100 the HDMI Tx into

receptacle of HDMI source (DVDP or Set-top Box) without power up of TV and

HD devices. Do recommend use any intermediate cable or adapter NOT to

between them. It may deteriorate the signal transmission performance.

Step 3

Plug the HDMI plug of the Rx side of HDFC-100 into the HDMI receptacle of a

TV. Do recommend use any intermediate cable or adapter between NOT to

them. It may deteriorate the signal transmission performance.

Step 4

Power ON the device of a HDMI source and a TV and check the blue power

LED on Tx and Rx ON.

Step 5

If the system does not work properly, go to page 1-4, trouble shooting.

Note: HDFC-100 can utilize either the +5V power supplied through a HDMI pin

(#18) from the HDMI source or the +5V power adaptor. Nonetheless, you have

to conﬁrm the power being capable to supply more than 500mA.

Note: Many HDMI sources are able to supply suﬃciently DC power to operate

HDFC- .100

1-3 Installation

Product specificaties

Merk:	Opticis
Categorie:	Kabels voor pc's en randapparatuur
Model:	HDFC-100-10
Kleur van het product:	Zwart
Snoerlengte:	10 m
Gebruikershandleiding:	Ja
Ondersteunde video-modi:	2160p
Maximum resolutie:	4096 x 2160 Pixels
Certificering:	FCC / CE
HDCP:	Ja
3D:	Ja
HDMI versie:	2.0
Ondersteunde grafische resoluties:	4096 x 2160
Aantal per verpakking:	1 stuk(s)
Kleurdiepte:	36 Bit
Audio Return Channel (ARC):	Ja
Temperatuur bij opslag:	-40 - 85 °C
Overdrachtssnelheid:	3.4 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 70 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Code geharmoniseerd systeem (HS):	84733080
Aansluiting 1:	HDMI Type A (Standaard)
Aansluiting 2:	HDMI Type A (Standaard)
Connector 1 vormfactor:	Recht
Connector 2 vormfactor:	Recht
Aansluiting 1 type:	Mannelijk
Aansluiting 2 type:	Mannelijk