Optex HX-40DAM Handleiding

Optex Bewegingsmelders HX-40DAM

Lees hieronder de 📖 handleiding in het Nederlandse voor Optex HX-40DAM (21 pagina's) in de categorie Bewegingsmelders. Deze handleiding was nuttig voor 101 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21

N219

CONTENTS

1 INSTALLATION PRECAUTIONS ............2

1-1 BEFORE INSTALLATION ................2

1-2 PARTS IDENTIFICATION ................3

1-3 KNOCKOUTS ..................................4

1-4 DETECTION AREA..........................5

1-5 DETERMINATION OF PIR

DETECTION LENGTH ....................5

2 INSTALLATION .......................................6

2-1 MOUNTING WITH BRACKET .........6

2-2 ADJUSTING THE VERTICAL

ANGLE.............................................8

2-3 MOUNTING WITHOUT

BRACKET ........................................9

2-4 WIRING .........................................10

2-5 WALL TAMPER (OPTION) ............11

3 WALK TEST ..........................................12

4 SETTING ..............................................13

5 AREA ADJUSTMENT ...........................16

6 LED INDICATION .................................17

7 SPECIFICATIONS ................................18

7-1 SPECIFICATIONS .........................18

7-2 DIMENSIONS ................................19

HX-40 2 PIRs standard model

HX-40AM HX-40 with anti-masking

HX-40DAM HX-40AM with micro-wave

3.0 m high mount detection area (12.0 m)

Unique pyro element

Intelligent AND logic

Dual signal processing logic

Vegetation sway analysis logic

Ideal detection area setting

Digital anti-masking (AM/DAM model only)

Microwave range selector (DAM model only)

•

NO.59-1501-3

INSTALLATION INSTRUCTIONS

High Mount

Outdoor Detector

HX-40/40AM/

40DAM

HX-40/40AM/

40DAM

High Mount

Outdoor Detector

- 1 -

INSTALLATION PRECAUTIONS

1-1

BEFORE INSTALLATION

Warning Failure to follow the instructions provided with this indication and improper

handling may cause death or serious injury.

Caution Failure to follow the instructions provided with this indication and improper

handling may cause injury and/or property damage.

The check mark indicates recommendation.

The nix sign indicates prohibition.

Warning Warning Caution

Do not repair or modify

product Keep product away from water Mount the unit securely

Mounting height Keep the detector parallel to the ground.

Consider the direction a person is approaching from, as well as the detection area.

Install the detector in a place where it is free from false alarm factors. For example:

Sunlight and reflection• Heat source• Objects moving in the wind •

Tilt

Parallel

2.5 m – 3.0 m

(8'2" – 9'10")

- 2 -

-Precautions for installing two or more sensors

HX-40

HX-40AM

HX-40DAM

Do not install two or more HX-40DAM’s units side-by-side or face-to-face. Instead, install them

back-to-back. If mounting on the same wall, be sure they are at least 1.0 m (3'3") apart from

each other.

1.0 m (3'3") or more Less than 1.0 m (3'3")

1-2

PARTS IDENTIFICATION

Screw kit

For joint For wall mounting For hood

Screw (4 × 20 mm) Screw (4 × 20 mm) Screw (3 × 10 mm)

*Lock screw attached on bracket base

Bracket base

Screw (3 × 10 mm)

Area masking seal

Main unit

Bracket

LED indicator

Lock screw* (M4 × 35 mm)

Lens

Base

PIR sensor

(Do not touch)

Terminals

Shaft cover

Cover

Lock screw

Hood

Anti-masking infrared LED

(HX-40AM/DAM only)

Microwave unit

(HX-40DAM

only)

(Do not touch)

Screw (4 × 20 mm)

- 3 -

Product specificaties

Merk:	Optex
Categorie:	Bewegingsmelders
Model:	HX-40DAM
Kleur van het product:	Wit
Gewicht:	700 g
Internationale veiligheidscode (IP):	IP55
LED-indicatoren:	Ja
Plaatsing:	Buiten
Connectiviteitstechnologie:	Bedraad
Montagewijze:	Muur
Type beeldsensor:	Passieve infraroodsensor (PIR)/Microgolfsensor
Ingangsspanning:	9.5 - 18 V
Bedrijfstemperatuur (T-T):	-20 - 60 °C