Optex Accurance R1002 Handleiding
Optex
Toegangscontrolesysteem
Accurance R1002
Lees hieronder de 📖 handleiding in het Nederlandse voor Optex Accurance R1002 (27 pagina's) in de categorie Toegangscontrolesysteem. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/27
Reverse detection system
ACCURANCE R1002
Installation instructions
(Ver. draft 0.00)
To find out useful hints, tips and information about OPTEX products
and services, please visit www.optex.net
59-2621-0
1
Copyright (C) 2017 OPTEX CO.,LTD.
Read carefully before use
・ This product is designed to detect a person moving
(passing) through reverse direction in the security areas
or in the public areas. However, it is necessary to
understand beforehand that it is not possible to detect all
reverse motion. And it is also necessary to use under
restrictions of the product according to this installation
instructions.
・ Install the product properly according to required local
regulations or guidelines.
・ Do not connect a fire alarm or a smoke detector to this
product.
・ The product is designed to detect targets only and
therefore not to prevent property loss and casualty, or
physical damage.
・ Note that the manufacturer and distributors are not liable
for any densification by any damages.
â–
Pictorial indication
These installation instructions use symbols to represent special attention for proper use of the product in order to
reduce the risk of any harm to other persons and property. Read carefully and understand the meaning of symbols as
described below.
Failure to follow the instructions provided with this indication and improper
handling may cause death or serious injury
Failure to follow the instructions provided with this indication and improper
handling may cause injury and/or property damage.
Indicates prohibition. Specific prohibited contents may be drawn in the figure, for example
disassembly prohibition.
Content to force or instruct actions.
59-2621-0
2
Copyright (C) 2017 OPTEX CO.,LTD.
Document disclaimer
Read carefully the following instructions for installation, wiring and setting.
Follow the instructions below to reduce the risk of fire or electrical shock.
・ Turn off the power during the installation.
・ Connect wires into the terminal blocks firmly. Incomplete wiring or disconnection may cause a fire.
・ Use this product within the specification, such as the correct power source and power consumption.
When using this wrong and not within the environmental conditions, it may cause an electric shock, an
injury or a fire.
・ Stop using the product when smoke or a strange smell comes from the product, and when it is broken or
damaged.
・ Do not use the products beyond the specifications. Otherwise, it may cause a fire or an electric shock by
a short circuit or heat.
・ Do not wash or insert anything into the product.
・ Do not put anything over the product in use. It may generate heat and burn the inside which can result to
cause a fire or an electric shock.
・ Do not ever open, modify or repair the product.
To reduce the risk of injury
・ Check periodically whether the products (especially the detection unit) are mounted firmly. If the
mounting plate or screws rust, those may fall of and injure (a) person(s).
To reduce the risk of failure
・ Do not use the product under environments with extreme humidity, oil, smoke, dust and any severe
vibration.
・ Do not stand on the product or put any heavy objects on the product.
To reduce the risk of injury
・ Use the specified wires.
・ Make sure there are no objects next to the product, which may interfere to the performance, such as an
emergency light.
・ The product is designed only for interior usage; inside a building, so do not use it outside.
・ Do not install the product higher than mentioned in the specifications. This may decrease the
performance.
・ Do not touch the window of the detection unit, this may reduce the detection performance.
・ Do not spray any chemical products on the product, such as thinner, benzine, air freshener or insect
spray.
Product specificaties
| Merk: | Optex |
| Categorie: | Toegangscontrolesysteem |
| Model: | Accurance R1002 |
Heb je hulp nodig?
Als je hulp nodig hebt met Optex Accurance R1002 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Toegangscontrolesysteem Optex
3 Februari 2023
Handleiding Toegangscontrolesysteem
- Toegangscontrolesysteem Bosch
- Toegangscontrolesysteem Honeywell
- Toegangscontrolesysteem Abus
- Toegangscontrolesysteem Acti
- Toegangscontrolesysteem Apc
- Toegangscontrolesysteem Axis
- Toegangscontrolesysteem Burg-Wachter
- Toegangscontrolesysteem Eminent
- Toegangscontrolesysteem EverFocus
- Toegangscontrolesysteem GeoVision
- Toegangscontrolesysteem Hikvision
- Toegangscontrolesysteem Iget
- Toegangscontrolesysteem Indexa
- Toegangscontrolesysteem Marmitek
- Toegangscontrolesysteem Provision ISR
- Toegangscontrolesysteem Satel
- Toegangscontrolesysteem Velleman
- Toegangscontrolesysteem Yale
- Toegangscontrolesysteem Steren
- Toegangscontrolesysteem Safescan
- Toegangscontrolesysteem Techly
- Toegangscontrolesysteem DSC
- Toegangscontrolesysteem ASSA ABLOY
- Toegangscontrolesysteem Approx
- Toegangscontrolesysteem Delta Dore
- Toegangscontrolesysteem Chief
- Toegangscontrolesysteem IOGEAR
- Toegangscontrolesysteem Dahua Technology
- Toegangscontrolesysteem EQ3
- Toegangscontrolesysteem ETiger
- Toegangscontrolesysteem Suprema
- Toegangscontrolesysteem Vimar
- Toegangscontrolesysteem Speco Technologies
- Toegangscontrolesysteem HID Identity
- Toegangscontrolesysteem ZKTeco
- Toegangscontrolesysteem Panduit
- Toegangscontrolesysteem ONE Smart Control
- Toegangscontrolesysteem Gewiss
- Toegangscontrolesysteem SOREX
- Toegangscontrolesysteem Atlantis Land
Nieuwste handleidingen voor Toegangscontrolesysteem
10 April 2024
10 April 2024
25 Maart 2024
19 Maart 2024
13 Maart 2024
5 Maart 2024
28 Februari 2024
27 Februari 2024
31 Januari 2024
31 Januari 2024