Onkyo TX-SR501 Handleiding

Onkyo Receiver TX-SR501

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo TX-SR501 (48 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48

AV Receiver

TX-SR501

TX-SR501E

Instruction Manual

Thank you for purchasing the Onkyo AV Receiver.

Please read this manual thoroughly before making con-

nections and plugging in the unit.

Following the instructions in this manual will enable you

to obtain optimum performance and listening enjoyment

from your new AV Receiver.

Please retain this manual for future reference.

Contents

Introduction

Important Safeguards................................................2

Precautions................................................................3

Supplied Accessories................................................4

Features.....................................................................4

Before Using the TX-SR501/TX-SR501E ...............5

Controls & Connectors .............................................6

Connections

Connecting Your AV Components.........................10

Connecting -compatible AV Components ........19

Installing Your Speakers ........................................20

Connecting Antenna ...............................................22

Setup

Powering Up & Setting Up the TX-SR501/

TX-SR501E.........................................................24

Important—First Time Setup..............................24

Configuring Speaker Set A.....................................26

Operation

Playing Your AV Components...............................28

Using the Tuner ......................................................30

Common Functions.................................................32

Using the Listening Modes.....................................34

Audio Adjust Functions..........................................37

Recording................................................................39

Remote Controller

Using the Remote Controller RC-479S with Your

Other AV Components........................................40

Using the Remote Controller RC-518M with Your

Other AV Components........................................41

Appendix

Troubleshooting......................................................45

Specifications..........................................................48

Important Safeguards

1. —All the safety and operating instructions Read Instructions

should be read before the appliance is operated.

2. —The safety and operating instructions Retain Instructions

should be retained for future reference.

3. Heed Warnings—All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions—All operating and use instructions

should be followed.

5. —Unplug the appliance from the wall outlet before Cleaning

cleaning. The appliance should be cleaned only as recom-

mended by the manufacturer.

6. —Do not use attachments not recommended by Attachments

the appliance manufacturer as they may cause hazards.

7. Water and Moisture—Do not use the appliance near water

–for example, near a bath tub, wash bowl, kitchen sink, or laun-

dry tub; in a wet basement; or near a swimming pool; and the

like.

8. —Do not place the appli-Accessories

ance on an unstable cart, stand, tripod,

bracket, or table. The appliance may

fall, causing serious injury to a child or

adult, and serious damage to the appli-

ance. Use only with a cart, stand, tri-

pod, bracket, or table recommended by

the manufacturer, or sold with the

appliance. Any mounting of the appliance should follow the

manufacturer’s instructions, and should use a mounting acces-

sory recommended by the manufacturer.

9. An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn.

10. Ventilation—Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the appliance and

to protect it from overheating, and these openings must not be

blocked or covered. The openings should never be blocked by

placing the appliance on a bed, sofa, rug, or other similar sur-

face. The appliance should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is provided.

There should be free space of at least 8 in. (20 cm) and an open-

ing behind the appliance.

11. —The appliance should be operated only from Power Sources

the type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, consult

your appliance dealer or local power company.

12. Grounding or Polarization—The appliance may be equipped

with a polarized alternating current line plug (a plug having one

blade wider than the other). This plug will ﬁt into the power

outlet only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to ﬁt, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of the

polarized plug.

13. —Power-supply cords should be Power Cord Protection

routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention

to cords at plugs, convenience receptacles, and the point where

they exit from the appliance.

14. Outdoor Antenna Grounding—If an outside antenna or cable

system is connected to the appliance, be sure the antenna or

cable system is grounded so as to provide some protection

against voltage surges and built-up static charges. Article 810 of

the National Electrical Code, ANSI/NFPA 70, provides infor-

mation with regard to proper grounding of the mast and support-

ing structure, grounding of the lead-in wire to an antenna-

discharge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. See Figure 1.

15. —For added protection for the appliance during a Lightning

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and discon-

nect the antenna or cable system. This will prevent damage to

the appliance due to lightning and power-line surges.

16. Power Lines—An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines

or circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

17. —Do not overload wall outlets, extension cords, Overloading

or integral convenience receptacles as this can result in a risk of

ﬁre or electric shock.

18. —Never push objects of any kind Object and Liquid Entry

into the appliance through openings as they may touch danger-

ous voltage points or short-out parts that could result in a ﬁre or

electric shock. Never spill liquid of any kind on the appliance.

19. Servicing—Do not attempt to service the appliance yourself as

opening or removing covers may expose you to dangerous volt-

age or other hazards. Refer all servicing to qualiﬁed service per-

sonnel.

20. Damage Requiring Service—Unplug the appliance form the

wall outlet and refer servicing to qualiﬁed service personnel

under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the appli-

ance,

C. If the appliance has been exposed to rain or water,

D. If the appliance does not operate normally by following the

operating instructions. Adjust only those controls that are cov-

ered by the operating instructions as an improper adjustment of

other controls may result in damage and will often require

extensive work by a qualiﬁed technician to restore the appliance

to its normal operation,

E. If the appliance has been dropped or damaged in any way, and

F. When the appliance exhibits a distinct change in performance –

this indicates a need for service.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

PORTABLE CART WARNING

S3125A

Important Safeguards—Continued

21. Replacement Parts—When replacement parts are required, be

sure the service technician has used replacement parts speciﬁed

by the manufacturer or have the same characteristics as the orig-

inal part. Unauthorized substitutions may result in ﬁre, electric

shock, or other hazards.

22. —Upon completion of any service or repairs to Safety Check

the appliance, ask the service technician to perform safety

checks to determine that the appliance is in proper operation

condition.

23. Wall or Ceiling Mounting—The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

24. —The appliance should be situated away from heat Heat

sources such as radiators, heat registers, stoves, or other appli-

ances (including ampliﬁers) that produce heat.

25. —The appliance should not be exposed to Liquid Hazards

dripping or splashing and no objects ﬁlled with liquids, such as

vases should be placed on the appliance.

FIGURE 1:

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

Precautions

For British models

Replacement and mounting of an AC plug on the power supply cord

of this unit should be performed only by qualiﬁed service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the

following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may

not correspond with the coloured markings identifying the terminals

in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.

IMPORTANT

A 5 ampere fuse is ﬁtted in this plug. Should the fuse need to be

replaced, please ensure that the replacement fuse has a rating of 5

amperes and that it is approved by ASTA or BSI to BS1362. Check

for the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE

SOCKET OUTLET IN YOUR HOME THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG CUT OFF AND DIS-

POSED OF SAFELY. THERE IS A DANGER OF SEVERE ELEC-

TRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO

ANY 13 AMPERE SOCKET.

If in any doubt, consult a qualiﬁed electrician.

For European Models

For U.S. models

Note to CATV system installer:

This reminder is provided to call the CATV system installer's atten-

tion to Section 820-40 of the NEC which provides guidelines for

proper grounding and, in particular, speciﬁes that the cable ground

shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

FCC Information for User

CAUTION:

The user changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

For Canadian Models

NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES

WITH CANADIAN ICES-003.

For models having a power cord with a polarized plug:

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

Modèle canadien

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA

CLASSE B EST CONFORME À LA NORME NMB-003 DU

CANADA.

Sur les modèles dont la ﬁche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE

DANS LA BORNE CORRESPONDANTE DE LA PRISE ET

POUSSER JUSQU’AU FOND.

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCT ORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECT RICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

S2898A

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH

LIEGNITZERSTRASSE

6, 82194 GROEBENZELL,

GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

I. MORI

declare in own responsibility, that the ONKYO product described

in this instruction manual is in compliance with the corresponding

technical standards such as EN60065, EN55013, EN55020 and

EN61000-3-2, -3-3.

Product specificaties

Merk:	Onkyo
Categorie:	Receiver
Model:	TX-SR501

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo TX-SR501 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Receiver Onkyo

Onkyo TX-SR393DAB Handleiding

19 Juni 2023

Onkyo R-805X Handleiding

2 Juni 2023

Onkyo R-805TX Handleiding

1 Juni 2023

Onkyo TX8250B Handleiding

28 Mei 2023

Onkyo DAC-HA200(B) Handleiding

21 Mei 2023

Onkyo TX-RZ920 Handleiding

14 Mei 2023

Onkyo TX-RZ630 Handleiding

12 Mei 2023

Onkyo TX-SR705 Handleiding

10 Mei 2023

Onkyo TX-RZ610 Handleiding

30 April 2023

Onkyo A-1VL Handleiding

20 April 2023

Handleiding Receiver

Nieuwste handleidingen voor Receiver

Strong LEAP-S3 Handleiding

29 April 2024

Iriver Astell & Kern AK Jr Handleiding

16 April 2024

Iriver Astell & Kern AK10 Handleiding

16 April 2024

Power Dynamics Powerline A50W Handleiding

15 April 2024

Power Dynamics WT460A Handleiding

15 April 2024

Sony STR-DE495 Handleiding

11 April 2024

Hegel H30A Handleiding

10 April 2024

Hegel H600 Handleiding

10 April 2024

Hegel P30A Handleiding

10 April 2024

PTN-electronics PA2B Handleiding

9 April 2024