Onkyo TX-NR838 Handleiding

Onkyo AV-Receiver TX-NR838

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo TX-NR838 (96 pagina's) in de categorie AV-Receiver. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/96

TX-NR838

AV RECEIVER

Advanced Manual

CONTENTS

AM/FM Radio Receiving Function 2

Tuning into a Radio Station 2

Registering an AM/FM Radio Station 3

Using RDS (European, Australian and Asian models) 3

Playing Content from a USB Storage Device 5

Listening to Internet Radio 6

About Internet Radio 6

TuneIn 6

Pandora®–Getting Started (U.S., Australia and

New Zealand only) 7

SiriusXM Internet Radio (North American only) 8

Slacker Personal Radio (North American only) 9

Registering Other Internet Radios 10

DLNA Music Streaming 12

About DLNA 12

Configuring the Windows Media® Player 12

DLNA Playback 12

Controlling Remote Playback from a PC 13

Music Streaming from a Shared Folder 14

About Shared Folder 14

Setting PC 14

Playing from a Shared Folder 14

Using Remote Controller for Playing Music Files 16

About the Remote Controller 16

Remote Controller Buttons 16

Icons Displayed during Playback 16

Using the Listening Modes 17

Selecting Listening Mode 17

Contents of Listening Modes 18

Checking the Input Format 22

Advanced Settings 23

How to Set 23

1.Input/Output Assign 24

2.Speaker Setup 27

3.Audio Adjust 33

4.Source Setup 34

5.Listening Mode Preset 37

6.Miscellaneous 38

7.Hardware Setup 38

8.Remote Controller Setup 44

9.Lock Setup 44

Operating Other Components with the Remote Controller

Functions of REMOTE MODE Buttons 45

Programming Remote Control Codes 45

TV Operation 46

Blu-ray Disc Player/DVD Player/DVD Recorder Operation

VCR/PVR Operation 47

Satellite Receiver/Cable Receiver Operation 48

CD Player Operation 48

Cassette Tape Deck Operation 48

To Operate CEC-compatible Components 49

Advanced Connection 50

Bi-Amping 50

Connecting Dipole Speakers 50

Connecting a Power Amplifier 50

Connecting and Operating Onkyo RI Components 51

About RI Function 51

RI Connection and Setting 51

iPod/iPhone Operation 52

Control Function between the Unit and External Component

Firmware Update 54

About Firmware Update 54

Updating the Firmware via Network 54

Updating the Firmware via USB 55

Troubleshooting 57

Reference Information 63

AM/FM Radio Receiving Function

Tuning into a Radio Station

 Tuning into stations automatically

1. Press TUNER on the main unit several times to select

either "AM" or "FM".

2. Press TUNING MODE so that the "AUTO" indicator on

the display lights.

3. Press TUNING to start automatic tuning.

r Searching automatically stops when a station is

found. When tuned into a radio station, the "

TUNED " indicator on the display lights. If FM stereo

broadcasting is tuned, the "FM STEREO" indicator

lights.

r No sound is output while the " TUNED " indicator

is off.

When the signal from an FM radio station is weak:

Radio wave may be weak depending on the building

structure and environmental conditions. In that case,

manually tune into the radio station of your choice by

referring to the next section.

 Tuning into stations manually

1. Press TUNER on the main unit several times to select

either "AM" or "FM".

2. Press TUNING MODE so that the "AUTO" indicator on

the display goes off.

3. Press TUNING to select the desired radio station.

r The frequency changes by 1 step each time

you press the button. The frequency changes

continuously if the button is held down and stops

when the button is released. Tune by looking at the

display.

To return the display to "AUTO": Press TUNING MODE

on the main unit again. A station is automatically tuned.

Normally "AUTO" should be displayed.

 Tuning into stations by frequency

It allows you to directly enter the frequency of the radio

station you want to listen to.

1. Press TUNER on the remote controller several times to

select either "AM" or "FM".

2. Press D.TUN.

3. Using the number buttons, enter the frequency of the

radio station within 8 seconds.

r To enter 87.5 (FM), for example, press 8, 7, 5, or 8,

7, 5, 0. If you entered a wrong number, press D.TUN

and enter a correct one.

AM/FM Radio Receiving Function

Registering an AM/FM Radio Station

It allows you to register up to 40 of your favorite AM/FM

radio stations. Registering radio stations in advance allows

you to tune into your radio station of choice directly.

 Registering a Station

1. Tune into the AM/FM radio station you want to register.

2. Press MEMORY on the unit so that the preset number

on the display flashes.

3. Repeatedly press PRESET to select a number

between 1 and 40 while the preset number is flashing

(about 8 seconds).

4. Press MEMORY again to register the station.

r When the station is registered, the preset number

stops flashing.

r Repeat this procedure for all of your favorite AM/FM

radio stations.

 Selecting a Preset Radio Station

1. Press CH +/- on the remote controller to select a preset

number.

r Alternatively you can press PRESET on the

main unit. You can also select by directly entering

the preset number with the number buttons on the

remote controller.

 Deleting a Preset Radio Station

1. Press CH +/- on the remote controller to select the

preset number to delete.

2. Press and hold MEMORY on the main unit and press

TUNING MODE to delete the preset number.

r When deleted, the number on the display goes off.

Using RDS (European, Australian and Asian

models)

RDS stands for Radio Data System and is a method of

transmitting data in FM radio signals.

rRDS works only in areas where RDS broadcasts are

available.

rIn some cases, the text information appeared on the

display is not identical to the content transmitted by

the RDS station. Furthermore, unexpected characters

may be displayed when the unit receives unsupported

characters. However, this is not a malfunction.

rIf the signal from an RDS station is weak, the RDS data

may be displayed continuously or not at all.

PS (Program Service): Tuning into a radio station

distributing Program Service information displays the

radio station name. Pressing DISPLAY displays the

frequency for 3 seconds.

RT (Radio Text): Tuning into a radio station transmitting

Radio Text information displays text on the display of the

unit.

PTY (Program Type): Allows you to search for RDS

stations by program type.

TP (Traffic Program): Allows you to search for radio

stations transmitting traffic information.

 Displaying Radio Text (RT)

1. Press RT/PTY/TP on the main unit once.

r The Radio Text (RT) is displayed scrolling across

the display. "No Text Data" is displayed when no text

information is available.

Product specificaties

Merk:	Onkyo
Categorie:	AV-Receiver
Model:	TX-NR838
Kleur van het product:	Zwart
Gewicht:	15500 g
Breedte:	435 mm
Diepte:	198.5 mm
Hoogte:	400 mm
Bluetooth:	Ja
Beeldscherm:	LCD
Bluetooth-versie:	2.1+EDR
Bluetooth-profielen:	A2DP, AVRCP
Ethernet LAN:	Nee
Geïntegreerde geheugenkaartlezer:	Nee
Audio-ingang (L, R):	7
Composiet video-ingang:	4
Componentingang video (YPbPr/YCbCr):	1
Stroomverbruik (in standby):	0.15 W
Aantal USB-aansluitingen:	1
Ingang stroom:	Ja
RS-232 port:	1
3D:	Ja
Remote (IR) ingang:	1
Ingebouwde audio decoders:	Dolby TrueHD, DTS-HD Master Audio, THX Surround EX
Digital Living Network Alliance (DLNA) gecertifieerd:	Ja
Audio Return Channel (ARC):	Ja
RS-232:	Ja
Mobile High-Definition Link ( MHL ):	Ja
Video upscaling:	Ja
Geschikt voor wifi:	Ja
Audio-uitgangskanalen:	7.2 kanalen
Frequentiebereik:	5 - 100000 Hz
Composiet video-uitgang:	1
Signaal/ruis-verhouding:	106 dB
D/A-converter:	24-bit/192kHz
Componentuitgang video (YPbPr/YCbCr):	1
HDMI in:	7
Internet radio:	Ja
Ondersteunde frequentiebanden:	AM, FM
Aantal voorkeurszenders:	40
Internet radio services ondersteund:	Pandora, Spotify, TuneIn
Apple docking:	Ja
12V trigger:	Ja
Inclusief RDS tuner:	Ja
Totale harmonische vervorming (THD):	0.08 procent
Apple docking-compatibiliteit:	Ja
Digitale audio optische in:	2
Aantal HDMI-uitgangen:	2
FM-band:	87.5 - 108 MHz
Diepe kleur support:	Ja
X.V. kleur support:	Ja
RDS:	PS, PTY, RT, TP
Automatisch digitaal afstemmen:	Ja
Ontvanger type:	Surround
Afstandsbediening inbegrepen:	Ja
Digitale audio-ingang (coax):	3
Wifi:	Ja
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	720 W
Input sensitiviteit:	200 mV
AM band bereik:	522 - 1610 kHz
Dynamisch vermogen uitvoer per kanaal(4 Ohm):	250 W
Dynamisch vermogen uitvoer per kanaal (8 Ohm):	150 W
Vermogen uitvoer per kanaal (20-20KHz@8 Ohm):	180 W
Inclusief optische drive:	Nee
Pre-out-connectiviteit:	Ja
Pre-out-kanaal:	7.2
Dynamisch vermogen uitvoer per kanaal (3 Ohm):	300 W
THX gecertificeerd:	THX Select2 Plus