Onkyo SKS-L500 Handleiding

Onkyo Speaker SKS-L500

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo SKS-L500 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
E
n
Speaker System
SKS-L500
SKC-L500C Center Speaker System
SKM-L500S Surround Speaker System
Instruction Manual
Thank you for purchasing an Onkyo speaker system.
Please read this manual thoroughly before using your
new speakers. Following the instructions in this
manual will enable you to obtain optimum
performance and listening enjoyment from your
speaker system.
Please retain this manual for future reference.
Contents
Getting Started
Package Contents ........................... 2
Placement ........................................ 2
Installing & Using
Using Cork Spacers with the
Speakers....................................... 2
Center Speaker Base ...................... 2
Wall Mounting.................................. 2
Connecting the Speakers............... 3
Using Speaker Mounts/Brackets ... 3
Appendix
Operating Precautions ................... 3
Speaker care.................................... 4
Use with a TV set or computer....... 4
Specifications.................................. 4
SKS-L500.fm Page 1 Monday, October 3, 2005 2:33 PM
2
SKC-L500C: Center speaker
×
1
SKM-L500S: Surround speaker
×
2
Speaker cable (green: 3 m, blue, gray: 9 m)
Cork spacers, 12pcs.
Bass for horizontal mounting
×
1
SKC-L500C: Center speaker
This speaker enhances the front left and right speakers,
making sound movements distinct and providing a full
sound image. In movies it’s used mainly for dialog.
Position it close to your TV facing forward at about ear
level, or at the same height as the front left and right
speakers.
SKM-L500S: Surround left and right speakers
These speakers are used for precise sound positioning
and to add realistic ambience. Position them at the sides
of the listener, or slightly behind, about 2–3 feet (60–
100 cm) above ear level. Ideally they should be equally
spaced from the listener.
The speaker cabinets are sensitive to extreme temper-
atures and humidity, do not put them in locations sub-
ject to direct sunlight or in humid places, such as near
an air conditioner, humidifier, bathroom, or kitchen.
Do not put water or other liquids close to the speak-
ers. If liquid is spilled over the speakers, the drive
units may be damaged.
As explained in this manual, mount the speakers on a
wall, or on the optional stands/brackets, otherwise,
they may fall, causing personal injury or damage to
the speakers.
We recommend using
the supplied cork spacers
to achieve the best possi-
ble sound from your
speakers. The cork spac-
ers prevent the speakers
from moving, providing
a more stable setup.
Use the center speaker base to mount the center speaker
horizontally. If you place the speaker and its base on top
of a TV or an entertainment center, adjust the angle of
the speaker so that it faces toward the listening position.
The center speaker should be installed on the base
securely. If the speaker is loose, try adjusting the posi-
tion so that it sits securely on the base.
The bottom of the center speaker and the top rear sur-
face of the base feature each two stoppers to prevent the
speaker from moving. Therefore, you can tilt the
speaker toward the front by up to 15 degrees.
Using the included cork spacers
We recommend using the
supplied cork spacers to
achieve the best possible
sound from your speak-
ers. The cork spacers
prevent the speakers
from moving, providing
a more stable setup.
The speakers can easily be wall mounted by using the
keyhole slots. To prevent the speaker from vibrating
against the wall, attach four of the supplied cork spacers
to the rear of each speaker.
Mounting vertically
To mount the speakers vertically, use the two keyhole
slots shown to hang each speaker on two screws that are
securely screwed into the wall.
Mounting horizontally
To mount the speakers horizontally, use the two keyhole
slots shown to hang each speaker on two screws that are
securely screwed into the wall.
Package Contents
Placement
Using Cork Spacers with the Speakers
Center Speaker Base
SKC-L500C
SKM-L500S
Cork
spacers
Bottom of the
SKM-L500S
Wall Mounting
15˚
SKC-L500C
Base for horizontal
mounting
Stoppers
Stoppers
Cork spacer
Buttom of
the bass
Cork spacer
Keyhole slot for
wall mounting
Keyhole slot for wall
mounting
Cork spacers
SKS-L500.fm Page 2 Monday, October 3, 2005 2:33 PM
3
The plaque of each speaker rotates so that you can posi-
tion the speakers upside down.
Caution:
A mounting screw’s ability to support a speaker
depends on how well its anchored to the wall. If you
have hollow walls, screw each mounting screw into a
stud. If there are no studs, or the walls are solid, use
suitable wall anchors.
Use screws with a head diameter of 9.5 mm or less and a
shank diameter of 4 mm or less. With hollow walls, use
a cable/pipe detector to check for any power cables or
water pipes before making any holes.
Leave a gap of 5 mm
between the wall and the
base of the screw head, as
shown.
(We recommend that you
consult a home installation
professional.)
Read the following before connecting your speakers:
Turn off your amp before making any connections.
The nominal impedance of these speakers is 6
. Use
only an amp that supports this impedance.
Pay close attention to speaker wiring polarity. Con-
nect positive (+) terminals to only positive (+) termi-
nals, and negative (–) terminals to only negative (–)
terminals. If the speakers are wired incorrectly, the
sound will be out of phase and will sound unnatural.
Be careful not to short the
positive and negative wires.
Doing so may damage your
amp.
Connecting the Speaker Cables
Threaded inserts for 5 mm machine screws are provided
for wall-mounting with commercially available speaker
mounts and brackets (SKC-L500C: rear, SKM-L500S:
rear and buttom). Refer to the manual supplied with
your mounts or brackets for installation details.
Note:
The portion of the screw that
goes into the speaker’s
threaded insert should be
between 5 mm and 9 mm
long.
The speakers can handle the specified input power when
used for normal music reproduction. If any of the fol-
lowing signals are fed to them, even if the input power is
within the specified rating, excessive current may flow in
the speaker coils, causing burning or wire breakage:
1.
Interstation noise from an untuned FM radio.
2.
Sound from fast-forwarding a cassette tape.
3.
High-pitched sounds generated by an oscillator, elec-
tronic musical instrument, and so on.
4.
Amplifier oscillation.
5.
Special test tones from audio test CDs and so on.
6.
Thumps and clicks caused by connecting or discon-
necting audio cables (Always turn off your amplifier
before connecting or disconnecting cables.)
7.
Microphone feedback.
The speakers contain strong magnets, so do not put
magnetic or iron objects such as screwdrivers close to
them. If you do, the object may be attached to the
magnets, causing personal injury or damage to the
diaphragm.
Connecting the Speakers
1
Strip the insulation from the
ends of the speaker cables,
and twist the bare wires tightly.
2
Use the cables to connect each speaker’s
input terminals to the corresponding
speaker output terminals on your amp.
To make a connection, while
pressing the terminal lever,
insert the wire into the hole, and
then release the lever.
Make sure that the terminals are
gripping the bare wires, not the insulation.
Wall
5 mm
Using Speaker Mounts/Brackets
Operating Precautions
FRONT
SPEAKERS
CENT ER
SPEAKER
SURROUND
SPEAKERS
R
L
SURROUND BACK SPEA KERS
SKF-L500
Front right speaker
SKF-L500
Front left speaker
SKC-L500C
Center speaker
SKM-L500S
Surround
right speaker
SKM-L500S
Surround left
speaker
Gray
Green
Blue
SKR-L500
Surround back
speaker
SKR-L500
Surround back
speaker
5 mm
5–9 mm
Mount or bracket
SKS-L500.fm Page 3 Monday, October 3, 2005 2:33 PM


Product specificaties

Merk: Onkyo
Categorie: Speaker
Model: SKS-L500

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo SKS-L500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Onkyo

Handleiding Speaker

Nieuwste handleidingen voor Speaker