Onkyo SKR-4700 Handleiding

Onkyo Speaker SKR-4700

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo SKR-4700 (4 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
En
L
R
SURROUND
SPEAKERS FRONT
SPEAKERS A CENTER
SPEAKER
SURROUND BACK
SPEAKER
+
+
+
+++
Thank you for purchasing of the Onkyo speaker system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable you to
obtain optimum performance and listening enjoyment from
your new speaker system.
Please retain this manual for future reference.
Before using this unit
The speaker cabinet is made of wood and sensitive to extreme
temperatures and humidity. Avoid placing the speaker system
in locations subjected to direct sunlight or in humid places such
as near an air conditioner, bathroom, or kitchen.
Be sure to turn off your amplifi er before connecting the speaker
system. Connecting it while the amplifi er is on may result in
damage to the ampli er or the speaker system.
The nominal impedance of this speaker system is 8 . Use Ω
only amplifi ers capable of handling this impedance.
Before turning on the amplifi ers power switch:
Make sure that the positive (+) and negative (-) speaker cables
do not contact each other. Otherwise, a short-circuit may occur,
causing damage to the amplifi er.
Be sure to connect the speaker cables with correct polarity
(connect the speaker’s positive (+) and negative (-) binding
posts with the amplifi er’s corresponding speaker terminals).
Reversed polarity results in impaired bass-range reproduction,
causing mislocalization of the sound image. Also, be sure to
connect the Right and Left speakers with the amplifi er’s
corresponding speaker terminals.
Pull lightly on the speaker cables to ensure that they are
connected fi rmly.
Instruction Manual
SKR-4700
Precaution on use
This speaker system can handle the specifi ed input power
when it is used for ordinary music reproduction. If the following
abnormal signals are fed to the speaker, however, an overcurrent
may fl ow in the internal circuits, causing burning or breakage
of the wires even if the input power is below the specifi ed
rating.
1. Noise produced when FM station is not tuned in.
2. Sound produced when fast-forwarding cassette tape
deck.
3. High-frequency sound generated by an oscillator, an
electronic musical instrument, etc.
4. Oscillating amplifi er signals.
5. Special test signals produced by audio checking CD, etc.
6. Sound produced when connecting or disconnecting audio
connection cables. (Always turn off the amplifi er’s power
before connecting or disconnecting cables.)
7. Howling when a microphone is used.
Connections
Turn the sound volume to the minimum and disconnect the power
cord from the amplifi er before connecting the speaker cables.
The nominal impedance of this speaker system is 8 . Use Ω
only amplifi ers capable of handling this impedance.
Use the supplied speaker cables to connect
between speaker’s input terminals and the
amplifi er’s speaker terminals as illustrated on
the right.
Connect the speaker cables securely to the
terminals, with the core wires twisted properly.
In this case, make sure that the core wires do
not touch each other. Note that a short circuit in core wires
may result in damage to the amplifi er.
SPEAKER SYSTEM
Connecting to AV amplifi er
SKF-4700
Front right
speaker
SKC-4700
Center speaker
SKM-4700
Surround right speaker
SKF-4700
Front left
speaker
SKM-4700
Surround left speaker
Red
Green
Blue
Gray
White
Brown
1. Strip the insulation of speaker
cables, and twist the core wires
tightly.
2. While pressing the lever, insert the
wire into the hole, and then release
the lever.
3. Make sure that the terminals are
gripping the core wires, not the
insulation.
SKR-4700
Surround
back
speaker
AV amplifi er
Specifi cations
Type: 2-way bass refl ex
Impedance: 8 Ω
Maximum input power: 130 W
Output sound pressure level: 81 dB/W/m
Frequency response: 50 Hz - 50 kHz
Crossover frequency: 6 kHz
Cabinet capacity: 4 L
Speaker (woofer): 10 cm cone
Speaker (tweeter): 2.5 cm balanced dome
Dimensions: 155 (W) x 266 (H) x 140 (D) mm
(Overall dimensions)
Weight: 1.8 kg
Others: Magnetic shielding
Accessory: 9 m speaker cable
Instruction manual
Spacer x 4
Specifi cations and appearance may subject to change for improvement
without prior notice.
Speaker care
Your Onkyo speaker is nished with a very high quality polymer
laminate covering that serves to protect the wood speaker cabinet.
Wipe the cabinet periodically with a dry, silicon-embedded or plain
soft cloth.
The covering may be cleaned with a soft cloth moistened with
water and a mild soap. Avoid the use of furniture polishes or harsh
cleansers.
Use a soft brush or hand vacuum cleaner to remove dust and lint
from the grille material.
If the speaker is to be wall-mounted, make sure that the walls are
strong enough to support the speaker’s weight. The weight that
mounting screws can support varies greatly depending on the wall
material and the position of the reinforcing ribs embedded in the
wall. Use the thickest and longest possible mounting screws with
mounting screw head diameters less than 9 mm and shank diameters
less than 4 mm (please consult with your interior designer or
contractor).
Placement
For better-quality sound, observe the following precautions when
you install the speaker system:
Placing the speaker system on several small-diameter supports
generally results in better sound than placing it directly on a
wide installation surface. Also note that high quality bass cannot
be obtained if the speaker system is unstably positioned. Always
use thin discs of cork or metal (such as coins) to seat the
speaker stably.
Place the Right and Left surround speakers in similar conditions.
If they are placed in extremely different conditions, left right
channel balance will be adversely affected.
When using as a Surround Back Speaker
It is very important to place your speakers properly to obtain the
optimum sound space for your listening pleasure.
The surround back speaker is required for enjoying 6.1ch
/
7.1ch
surround sound. The surround back speaker will also improve the
quality of sound effects for far more realistic acoustics.
Place the speaker so that its height is 1 meter higher than that
of the listener's ears.
TV or Screen
Center
speaker
Surround
right
speaker
Surround
back
speaker
Surround
left
speaker
Listener
Sub-
woofer
Front left
speaker
Front right
speaker
Using spacers
Affi x four of the supplied spacers to the SKR-4700.
Mounting on a wall
Spacer Bottom of the
SKR-4700
Wall bracket
Spacer
Cs
L
R
SURROUND
SPEAKERS
FRONT
SPEAKERS A CENT ER
SPEAKER
SURROUND BACK
SPEAKER
+
+
+
+++
非常感谢您购买Onkyo扬声器系统。
在使用之前,请详细阅读本使用手册。
遵照本使用手册的指示和说明进行操作,将使您通过新购置的扬
声器系统,得到最佳的音响效果和听觉享受。
请妥善保管本使用手册,以备将来参考。
使用本系统之前
本扬声器的箱体是木质的,因此,对极高(或极低)的温度和
湿度非常敏感。请不要将扬声器系统放置在阳光直射之处,或
高湿度的地方,如靠近空调机、浴室或厨房中。
在连接扬声器系统之前,请务必先关闭您的放大器。若在放大
器电源打开的状况下进行连接,则可能会损坏放大器或扬声器
系统。
本扬器系统的额定抗是。请使用对应此阻抗的
大器。
连接
在连接扬声器连接线之前,请先将放大器音量调至最小,并
拔出放大器的电源线。
本扬声器系统的额定阻抗是8Ω。请只使用对应于此阻抗的放
大器。
如右图所示,使用随机附带的扬声器连接
线,连接扬声器的输入端子和放大器的扬声
器端子。
连接扬声器连接线时,请正确地缠绕芯线,
将其牢固地连接在端子上。这时,请确认芯
线没有相互接触。请注意,芯线间的短路会
导致放大器的损坏。
使用手册
SKR-4700
使用注意事项
当本扬声器系统被用来进行普通的音乐再现时,可以承受一
的输入功率。但如果下述异常信号被输入扬声器,即使其输入
功率低于最大输入功率,也有可能在内部电路中产生过大的电
流,使线路烧毁或损坏。
1. 当收听调频广播未调准电台时产生的噪音。
2. 当盒式录音带快进时产生的声音。
3. 由振荡器、电声乐器等产生的高频音响。
4. 振荡的放大器信号。
5. 由音频测试CD等产生的特殊测试信号。
6. 在连接或拆除音频连接线时产生的声音。(请务必在连接
或拆除连接线前关闭放大器的电源)
7. 使用麦克风时的反馈啸声。
扬声器系统
连接到 AV 放大器
SKF-4700
前置右扬
声器
SKC-4700
中心扬声器
SKM-4700
环绕声右扬声器
SKF-4700
前置左扬
声器
SKM-4700
环绕声左扬声器
红色
绿色
蓝色
灰色
白色
茶色
1. 剥除扬声器连接线的绝缘外层,
扭紧芯线。
2. 压下端子杆,将扬声器连接线插
入洞中,然后松开端子杆。
3. 确认端子接触的是芯线而非绝缘
外层。
SKR-4700
环绕声后
扬声器
在打开放大器的电源开关之前:
确认扬声器连接线的正极(+)和负极(-)没有相互接触。否则可
能会发生短路,导致放大器的损坏。
在连接扬声器连接线时,一定要保证极性的正确。(将扬声
器的正(+)和负(-)接线柱连接至放大器上相应的扬声器端子。)
极性接反将会阻碍低音的再现,并导致声场不能正确定位。
同时,请务必使左侧和右侧的两个扬声器与放大器上相应的
扬声器端子正确地连接。
轻拉扬声器连接线,以确认其已牢固地连接。
AV 放大器


Product specificaties

Merk: Onkyo
Categorie: Speaker
Model: SKR-4700

Heb je hulp nodig?

Als je hulp nodig hebt met Onkyo SKR-4700 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Onkyo

Handleiding Speaker

Nieuwste handleidingen voor Speaker