Onkyo LS-B40 Handleiding

Onkyo Soundbar LS-B40

Lees hieronder de 📖 handleiding in het Nederlandse voor Onkyo LS-B40 (4 pagina's) in de categorie Soundbar. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN

http://www.onkyo.com/

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

For Dealer, Service, Order and all other Business Inquiries:

Tel: 201-785-2600 Fax: 201-785-2650

http://www.us.onkyo.com/

For Product Support Team Only:

1-800-229-1687

http://www.us.onkyo.com/

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0 Fax: +49-8142-4208-213

http://www.eu.onkyo.com/

Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.

Tel: 852-2429-3118 Fax: 852-2428-9039

http://www.hk.onkyo.com/

1301, 555 Tower, No.555 West NanJing Road, Jing’an District, Shanghai, China 200041,

Tel: 86-21-52131366 Fax: 86-21-52130396

http://www.cn.onkyo.com/

The Americas

China

Europe

Asia, Oceania, Middle East, Africa

Please contact an Onkyo distributor referring to Onkyo SUPPORT site.

http://www.intl.onkyo.com/support/

The above-mentioned information is subject to change without prior notice.

Visit the Onkyo web site for the latest update.

(Mainland)

(Hong Kong)

Meridien House, Ground floor, 69 - 71 Clarendon Road, Watford, Hertfordshire, WD17 1DS, United Kingdom

Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95

SN29401533

D1308-0

* 2 9 4 0 1 5 3 3 *

COAXIAL jack

Connect a separately sold cable to

input the sound.

OPTICAL jack

Connect the supplied optical

digital audio cable to input audio.

ANALOG jack

Connect the supplied stereo mini

plug cable to input audio.

SUBWOOFER PRE OUT terminal

Connect a

subwoofer sold commercially

Use the active subwoofer sold commercially.

When you use a subwoofer, see the subwoofer’s

instructions manual before connecting.

IR OUT terminal

Connect the supplied IR flasher to allow the TV remote

control signal to pass through.

Double-sided tape for mounting is attached to the

supplied IR flasher side. Mount to near the remote

control signal sensor of TV with the double-sided

tape. (o P.9)

USB port

Connect a USB flash drive.

23456789

PREPARATION

Placement

Select an appropriate placement for your environment.

To enjoy the best sound, do not place an object on both sides of the unit.

Mounting to Wall

Refer all servicing to qualified service personnel.

Accessories to be prepared: Wall mounting template

PACKAGE CONTENTS

Make sure you have the following items before use.

The number in parenthesis indicates the quantity.

In catalogs and on packaging, the letter at the end of the product name

indicates the color.

Main unit (1) AC adapter (1)/

Power cord (1)

IR flasher (1)

Remote controller (RC-877S) (1)

A lithium-ion battery (CR2025) is supplied in

the remote control at the time of purchase.

Optical digital audio

cable 5 ft. (1.5 m) (1)

ф3.5 mm stereo mini

plug cable (1)

Wall mounting template (1)

Stand (2)/Cushion (4)/

Mounting screws (3/8" (10 mm)) (4)

LS-B40

Soundbar System

Instruction Manual

1. Attach the template to the position to mount.

Be careful not to make a tape mark on the wall.

Stand at a distance and check its position. Check if it is horizontal.

2. Mark the two screw points with a pen.

Leave 1" (25 mm) between the soundbar and your TV.

Wall mounting

template

3. Remove the template and screw the screws into the wall.

Use the screws with 3/16” (4 mm) diameter.

Keep 5/16” (8.5 mm) of the screw protruding from the wall surface.

Do not use the supplied mounting screws for stand.

Wall

5/16” (8.5 mm)

3/16” (4 mm)

4. Connect all cables to the soundbar. (o See 7 to 8 pages)

Insert the head of the screw into the keyhole slot of the soundbar and fix it

firmly.

Please confirm that the head of the screw is at the top of the hole.

Do not use the supplied stands.

Keyhole slot

Actual place

to apply the

screw

Mounting on Low Board or TV Stand

Accessories to be prepared: Stands, Cushion, Mounting screws

Before placing the soundbar on the boards, attach the supplied stands to prevent

falling.

(Back side)

(Front side)

Connections

Connect the TV and this unit using one of the possible connection cables.

Remote control sensor of TV

IR Flasher

Listening to TV

Turn on the TV.

For details on operation, see the "BASIC OPERATION" ( P.11).o

The unit can be operated with your existing TV remote controller. For details

on operation, see the “Using TV Remote Controller” (o P.17).

2 3

1. Turn the power on.

2. Switch the input to TV.

(On the buttons of the unit, switches

in the order of TV o o USB

Bluetooth.)

3. Adjust the volume.

Please note:

When preparing the screws used for wall mounting, ask qualified service personnel

and give careful consideration to their type, material and length so that they can

withstand the weight. If reinforcement is necessary, use reinforcing plates or anchors.

Onkyo is not responsible for accidents or damage caused by improper installation,

insufficient wall strength, improper screw installation or natural calamity, etc.

Thank you for purchasing an Onkyo product. Please read this manual thoroughly before

making connections and plugging in your new Onkyo product.

Following the instructions in this manual will enable you to obtain optimum performance and

listening enjoyment from your new product.

Please retain this manual for future reference.

Trademarks and Licensing

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Onkyo is under license. Other trademarks and trade

names are those of their respective owners.

AuraSphere™ is a trademark of Onkyo Corporation.

AuraSphere is a listening experience technology developed by Onkyo

Corporation and Sonic Emotion ag.

11 12 13 14 15 16 17 18 19 20

BASIC OPERATION

Using Main Unit Controls

1 3 4

6 87

2 5

3. INPUT buttons

Switches the input source.

 To play the TV sound: Turns the TV on and press the button.

To play music from a USB flash drive: Connect the USB flash drive and

press the button.

 To play music from a Bluetooth device: Press the button. Refer to

page 16 for connecting.

4. VOLUME +/– buttons

Allows to adjust the volume by 1 step in the 0 to 30 range.

5. SUBWOOFER +/– button

Allows to adjust the subwoofer level by 1 step in the –10 to +10 range while

listening to the sound. The default setting is 0.

6. SOUND MODE button

Switches the sound mode of input sound as desired. The mode switches in the

order of MUSIC NEWS MOVIE MUSIC each time the button is pressed. o o o o

You can select the mode for each input source (TV, USB and Bluetooth).

MUSIC Mode: Gives concert hall-like sound effect.

NEWS Mode: Allows to comfortably listen news programs.

MOVIE Mode: Creates powerful 3D sound effect suitable for enjoying movies.

 To switch the sound output of the dual mono source (sound multiplex):

Press and hold for approximately 3 seconds. The sound output switches in the

order of MAIN o SUB o MAIN+SUB o MAIN every time you press and hold.

7. USB operation buttons

Allows operation when the input source is USB.

 button: Pressing once returns the audio to the beginning of the file being

played. Pressing twice continuously returns it to the previous file. Then the

audio will skip back to the previous file each time the button is pressed.

 button: Pressing during stop starts playback. Pressing during playback

temporarily stops the audio.

 button: The audio skips to the next file each time the button is pressed.

1 2

1. z (ON/STANDBY) button

Switches the power on/standby.

2. (Mute) button

Turns the audio off temporarily. Press again to cancel muting.

The Status indicator flashes when the audio is muted.

Muting will also be canceled when the volume is changed or the power is

turned off and on.

1. (ON/STANDBY) button/INPUT button

Switches the power on/standby. Also, switches the input source.

 To turn the power on: Press once.

 To turn the standby: Press and hold for 3 seconds. The indicators go off.



To input the source: Press once to switch. Switches in the order of TV USB o o

Bluetooth each time the button is pressed.

Auto Power On function: The unit automatically turns on when audio signal

is output from the TV. To switch on/off this function, press and hold first ,

and then for about 3 seconds. When this function is set to on, the

indicator flashes once. It flashes twice when this function is set to off.

Auto Standby function: The unit automatically enters the standby mode if

the status with no operation and sound continues 5 minutes. To switch on/off

this function, press and hold first , and then for about 3 seconds.

When this function is set to on, the indicator flashes once. It flashes twice

when this function is set to off.

2. INPUT source indicators

 Lights when the source is TV.

 Lights when the source is USB.

 Lights when the source is Bluetooth.

3. VOLUME –/+ buttons

Allows to adjust the volume by 1 step in the 0 to 30 range.



Pressing the buttons together will mute audio. The status indicator on the

front of the main unit will flash. Press the VOLUME-/+ button again to cancel mute.

4. SOUND MODE button

Switches the sound mode of input sound as desired. The mode switches in the

order of MUSIC NEWS MOVIE MUSIC each time the button is pressed. o o o o

You can select the mode for each input source (TV, USB and Bluetooth).

MUSIC Mode: Gives concert hall-like sound effect.

NEWS Mode: Allows to comfortably listen news programs.

MOVIE Mode: Creates powerful 3D sound effect suitable for enjoying movies.

5. SOUND MODE indicators

Lights according to the selected sound mode.

 MUSIC Lights in the music mode.

 NEWS Lights in the news mode.

 MOVIE Lights in the movie mode.

 Lights when the input signal is Dolby Digital.

6. Left channel speaker

7. Status indicator

Lights white when the power is on. It keeps flashing during mute. It flashes just

once every time volume is adjusted or the input or sound mode is changed (Only

when using remote controller). It goes off during standby.

8. Right channel speaker

Using Remote Controller

How to Use Remote Controller

20°

30°

Remote control sensor

Approx.16 ft

(5 m)

How to Replace Remote Controller Battery

Positive (+) side

(Back side) (Back side) Use only a battery

of the same type

(CR2025).

Playing via Bluetooth Connection

Within 33 ft (10 m)

Steps 3 and 4 need to be performed

on the Bluetooth device.

1. Turn the unit on.

2. Press .

 The indicator flashes faster, and

the pairing starts.



The pairing will end in about 30 seconds

and the indicator starts flashing slowly.

In this case, press

again.

3. On the Bluetooth device, select

the unit (Onkyo LS-B40) to

make a connection.



For details on operation, see the instruction

manual of the Bluetooth device.



If the operation does not start as

normal within the 33 feet (10 m)

range, get the Bluetooth device closer

to the unit and retry the operation.

If a passcode (password, passkey or

PIN code) is requested, enter "0000".

When the pairing is completed, the

indicator lights.

4. Start playback.

Using TV Remote Controller

 Preprogrammed functions:

This unit has been preprogrammed so that it can be

operated with your existing TV remote controller. The functions that can be operated are volume

control (+/–) and muting ( ). If you want to use other functions or cannot operate with your

TV remote controller, you can use the learning function as below to enable the operation.

The mute state can be turned over each time you press the Mute button on your TV

remote controller. In such case, you can synchronize the mute status of the unit and the

TV by pressing and holding the Mute button on your TV remote controller.

 To disable the preprogrammed function, press and hold first , and then for about

10 seconds. When the preprogrammed function is successfully disabled, indicator

flashes 3 times, then any TV remote controller cannot be used to operate the unit. When

you want to re-enable the preprogrammed function, perform the same operation. When

the preprogrammed function is successfully re-enabled, indicator flashes once, then

you can use any remote controller using preprogrammed function.

To control the preprogrammed functions: Varieties of TV remote controllers have been

preprogrammed on this unit, which may lead to unintended operation from the other remote

controller than your TV remote controller. In such case, press and hold first and then , and then

press either volume or mute button on your T V remote controller 2 or 3 times to turn on the controlling

function. When the controlling function is set to on, the indicator flashes twice, and then, the

other remote controller cannot be operated.

Controlling function may not be set to some TV remote controllers.

 To cancel the controlling function, press and hold first , and then for about 10 seconds. When

the controlling function is successfully cancelled, indicator flashes once, then you can use any

remote controller using preprogrammed function.

 Learning function: You can operate the unit with a TV remote controller by assigning

the functions to the buttons of the remote controller. Perform the following button

operation, when the indicator starts flashing, direct your TV remote controller to remote

control sensor of this unit and press the button to assign on the TV remote controller 3 times.

When the Learning function is successfully set, indicator flashes twice.

* Press button first when pressing and holding the buttons together.

Learning function Button operation (Press simultaneously for 3 seconds)

ON/STANDBY o

VOLUME + o

VOLUME – o

Troubleshooting

Check the items below if you have any problem.

Before requesting repair: If the unit does not work or accept control, try resetting the unit to its

factory defaults and check if your problem is solved. Perform the following reset procedure.

1. Press and hold the button on the main unit and the buttons for 10 seconds.

When reset is complete, the three INPUT source indicators flash and the unit automatically enters the

standby mode.

Power

Can’t turn on the soundbar

Make sure that the power cord is properly

plugged into the wall outlet. ( P.8)o

Unplug the power cord from the wall

outlet, wait 10 seconds or more, then

plug it in again.

The soundbar turns off unexpectedly

The soundbar will automatically enter

standby mode when Auto Standby

launches. ( P.12)o

The soundbar turns off and after

restoring the power, it turns off again

The protection circuit has been activated.

Remove the power cord from the wall

outlet immediately. Make sure that all

cables and input sources are properly

connected, and leave the soundbar with

its power cord disconnected for 1 hour.

After that, reconnect the power cord and

turn the power on. If the soundbar turns

off again, unplug the power cord and

contact your Onkyo dealer.

If smoke, smell or abnormal noise is produced

by the soundbar, unplug the power cord from

the wall outlet immediately and contact your

Onkyo dealer.

Audio

There’s no sound, or it’s very quiet

Make sure that all audio connecting

plugs are pushed in all the way.

( P.7, 8)o

Make sure that the input of device is

connected properly. ( P.7, 8)o

When the Status indicator flashes in

white, the muting is enabled. Press

or Volume –/+ on the remote

controller or the Volume +/– buttons

simultaneously on the soundbar to

disable the muting. ( P.14)o

Make sure that none of the connecting

cables are bent, twisted, or damaged.

The base sound cannot be heard

The protection circuit in the subwoofer

may have tripped due to a rise in

temperature. Disconnect the power

cord from the outlet and reconnect after

a while.

Noise can be heard

Do not bind the power cord, connection

cables and other audio cables with a

band.

An audio cable may be picking up

interference. Try repositioning your

cables.

Make sure that the unit is properly

connected to a subwoofer sold

commercially.

Remote Controller

The remote controller doesn’t work

Make sure that the battery is installed

with the correct polarity. ( P.13)o

Make sure that the remote controller is

not too far away from the soundbar, and

that there’s no obstruction between the

remote controller and the soundbar’s

remote control sensor. ( P.13)o

Make sure that the soundbar is not

subjected to direct sunshine or

invertertype fluorescent lights. Relocate

if necessary.

The remote control may not work

properly, when being used for the

first time after the purchase, or when

the battery is inactivated because the

remote controller is not used for a long

time. In that case, try performing the

following operations.

1. Hold down the remote controller’s

button (for at least ten seconds). If the

remote controller still does not operate,

repeat this operation.

2. Remove the button battery, wipe it with

a dry cloth, and then insert it again.

Playing USB Memory

The unit supports USB memory formatted

using FAT12, FAT16 and FAT32 file system.

The unit is compatible with MP3

playback and following audio format is

supported.

MPEG1 Audio Layer3 format with a

sampling rate of 32, 44.1 or 48 kHz and

32 to 320 kbps bit rate

MPEG2 Audio Layer3 format with a

sampling rate of 16, 22.05 or 24 kHz

and 8 to 160 kbps bit rate

MPEG2.5 Audio Layer3 format with a

sampling rate of 8, 11.025 or 12 kHz

and 8 to 64 kbps bit rate

You can play MP3 files stored on the

root folder only. MP3 files stored on

the other folders cannot be played on

this unit.

The Soundbar supports USB flash drives

only. Note, however, that playback may

not be possible with some USB flash

drives.

The soundbar contains a

microcomputer for signal processing

and control functions. In very rare

situations, severe interference, noise

from an external source, or static

electricity may cause it to lockup. In

the unlikely event that this happens,

unplug the power cord from the wall

outlet, wait at least five seconds, and

then plug it back in.

If it doesn’t work properly, please try

resetting (oP.18).

Onkyo is not responsible for damages

(such as CD rental fees) due to

unsuccessful recordings caused by

the unit’s malfunction. Before you

record important data, make sure

that the material will be recorded

correctly.

If you reset Bluetooth of this unit or removed the registration of this unit from the

Bluetooth device, perform pairing (see above) again.

 To connect any other Bluetooth device, press and hold the button of the main

unit to start pairing.

Learning function Button operation (Press simultaneously for 3 seconds)

MUTE + o

INPUT + o

SOUND MODE + o

It is recommended to select buttons that do not prevent TV operation when assigning

the functions to your remote controller.

Signal of some types of remote controller may not be received by the unit. In that case,

use the remote controller supplied with the unit.

Product specificaties

Merk:	Onkyo
Categorie:	Soundbar
Model:	LS-B40
Kleur van het product:	Zwart
Bluetooth:	Ja
Bluetooth-versie:	2.1+EDR
Connectiviteitstechnologie:	Bedraad en draadloos
Gemiddeld vermogen:	- W
FM-radio:	Ja
3D:	Ja
Ingebouwde audio decoders:	Dolby Digital
Audio-uitgangskanalen:	- kanalen
Ophangsysteem voor aan de muur:	Ja
Meegeleverde subwoofer:	Nee
Apple docking-compatibiliteit:	Niet ondersteund
Aantal full-range drivers:	4
Aantal woofer drivers:	2
Aantal tweeter drivers:	2
Afstandsbediening inbegrepen:	Ja